RCS2012F8250CS Equivalent & Substitute Parts

Part Overview

The RCS2012F8250CS is a 825 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. The part is supplied in Tape & Reel packaging and complies with ROHS3 and REACH standards. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings are matched across alternative manufacturers.

Substiute Parts

RCS2012F8250CS

Samsung Electro-MechanicsIn Stock: 897RCS2012F8250CS Datasheet

Current PartRFQ

CRCW0805825RFKEA

Vishay DaleIn Stock: 46267CRCW0805825RFKEA Datasheet

SimilarRFQ

ERJ-6ENF8250V

Panasonic Electronic ComponentsIn Stock: 60494ERJ-6ENF8250V Datasheet

SimilarRFQ

RC0805FR-07825RL

YAGEOIn Stock: 543838RC0805FR-07825RL Datasheet

SimilarRFQ

RMCF0805FT825R

Stackpole Electronics IncIn Stock: 101547RMCF0805FT825R Datasheet

SimilarRFQ

RMCS0805FT825R

Stackpole Electronics IncIn Stock: 9746RMCS0805FT825R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F8250CS are qualified based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Resistance: 825 Ohms
• Tolerance: ±1%
• Power Rating: 0.125W (1/8W)
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

• Package / Case: 0805 (2012 Metric)
• Number of Terminations: 2
• Supplier Device Package: 0805

Compliance & Environmental (Must Match or Exceed):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

All five identified substitute parts meet these criteria. Variations in physical height (seated maximum) and specific feature sets (anti-sulfur, moisture resistant, automotive AEC-Q200) do not disqualify substitution when core electrical and mechanical specifications align.

Parameter Comparison

Engineering Selection Recommendations

All five substitute parts are qualified for direct replacement based on matching electrical specifications, mechanical package dimensions, and compliance certifications. Selection among substitutes depends on application-specific requirements:

For General Industrial Applications: RC0805FR-07825RL (YAGEO) offers the highest inventory availability (543,748 pcs) with moisture-resistant characteristics matching the original specification.

For Automotive Applications: CRCW0805825RFKEA (Vishay Dale), ERJ-6ENF8250V (Panasonic), and RMCF0805FT825R (Stackpole) all carry AEC-Q200 automotive qualification. CRCW0805825RFKEA provides the lowest seated height (0.50mm).

For Anti-Sulfur Requirement: RMCS0805FT825R (Stackpole) provides anti-sulfur protection matching the original RCS2012F8250CS feature set, with 9,653 pcs available inventory.

All parts maintain ROHS3 compliance, unlimited moisture sensitivity level (MSL 1), and identical electrical performance across the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805825RFKEA replace RCS2012F8250CS in non-automotive applications?

A: Yes. The CRCW0805825RFKEA meets all electrical and mechanical specifications required for substitution. The AEC-Q200 automotive qualification is an additional feature that does not restrict use in general industrial applications.

Q: What is the significance of the height difference between substitute parts?

A: Seated maximum heights range from 0.50mm to 0.70mm across the substitute group. All values remain within acceptable PCB assembly tolerances for 0805 package components. Height differences do not affect electrical performance or thermal characteristics.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitute parts are supplied in Tape & Reel (TR) packaging format, matching the original RCS2012F8250CS packaging specification.

Q: Does the anti-sulfur feature of RCS2012F8250CS require a specific substitute?

A: The RMCS0805FT825R (Stackpole) explicitly includes anti-sulfur protection. However, other substitutes without this specific feature designation remain compliant for applications where anti-sulfur protection is not a mandatory requirement.

Q: Are all substitutes ROHS3 and REACH compliant?

A: Yes. All five substitute parts carry ROHS3 compliance and REACH Unaffected status, matching the environmental and regulatory requirements of the original RCS2012F8250CS.

Q: Can substitute parts be mixed in the same production batch?

A: Yes. All substitute parts share identical electrical specifications (825 Ω ±1%, 0.125W, ±100ppm/°C) and mechanical package dimensions (0805), allowing interchangeable use within the same circuit design.