RCS2012F7152CS Equivalent & Substitute Parts

Part Overview

The RCS2012F7152CS is a 71.5 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur and moisture-resistant construction. The part maintains Active product status with 609 units currently in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

RCS2012F7152CS

Samsung Electro-MechanicsIn Stock: 689RCS2012F7152CS Datasheet

Current PartRFQ

CRCW080571K5FKEA

Vishay DaleIn Stock: 25752CRCW080571K5FKEA Datasheet

SimilarRFQ

ERJ-6ENF7152V

Panasonic Electronic ComponentsIn Stock: 145215ERJ-6ENF7152V Datasheet

SimilarRFQ

RC0805FR-0771K5L

YAGEOIn Stock: 196146RC0805FR-0771K5L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS2012F7152CS is determined by strict equivalence across the following parameters:

Electrical Equivalence Requirements:

• Resistance value: 71.5 kOhms (exact match)
• Tolerance: ±1% (exact match)
• Power rating: 0.125W / 1/8W (exact match)
• Temperature coefficient: ±100ppm/°C (exact match)
• Operating temperature range: -55°C ~ 155°C (exact match)

Mechanical Equivalence Requirements:

• Package / Case: 0805 (2012 Metric) (exact match)
• Number of terminations: 2 (exact match)
• Composition: Thick Film (exact match)

Compliance Requirements:

• RoHS3 Compliant (required)
• Moisture Sensitivity Level 1 (required)
• REACH Unaffected status (required)

All three substitute parts meet these criteria. Packaging format differences (Tape & Reel versus Cut Tape & Digi-Reel) do not affect electrical or mechanical substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the RCS2012F7152CS and meet identical electrical, mechanical, and compliance requirements. Selection among these alternatives is based on availability, packaging preference, and supply chain considerations:

CRCW080571K5FKEA (Vishay Dale): This substitute carries AEC-Q200 automotive qualification and is supplied in Cut Tape & Digi-Reel packaging. The seated height of 0.020" (0.50mm) is the lowest among all options, which may be advantageous in space-constrained applications. Inventory availability is 25,721 units.

ERJ-6ENF7152V (Panasonic Electronic Components): This substitute carries AEC-Q200 automotive qualification and is supplied in Tape & Reel packaging, matching the original part's packaging format. The seated height of 0.028" (0.70mm) is the highest among all options. Inventory availability is 145,106 units, the highest among all alternatives.

RC0805FR-0771K5L (YAGEO): This substitute features moisture-resistant construction matching the original part's environmental protection. It is supplied in Cut Tape & Digi-Reel packaging. The seated height of 0.024" (0.60mm) provides a mid-range profile. Inventory availability is 196,095 units.

All parts maintain Active product status and full compliance with ROHS3, REACH, and MSL requirements.

Frequently Asked Questions (FAQ)

Q: Can CRCW080571K5FKEA replace RCS2012F7152CS in any application?

A: Yes. Both parts share identical electrical specifications (71.5 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C), mechanical dimensions (0805 package, 2.00mm x 1.25mm), and compliance certifications (ROHS3, MSL 1, REACH Unaffected). The packaging format difference (Cut Tape & Digi-Reel versus Tape & Reel) does not affect electrical or mechanical compatibility.

Q: What is the significance of the seated height differences among substitute parts?

A: Seated height variations (0.020" to 0.028") reflect manufacturing tolerances and design differences among manufacturers. These differences are within acceptable limits for standard PCB assembly processes. Selection should consider specific PCB clearance requirements if height-constrained applications are involved.

Q: Are the automotive AEC-Q200 qualifications on CRCW080571K5FKEA and ERJ-6ENF7152V required for substitution?

A: No. AEC-Q200 qualification is an additional feature present on two substitute parts but not required for functional equivalence. The original RCS2012F7152CS does not carry this designation. Both qualified and non-qualified parts meet identical electrical and mechanical specifications.

Q: Does packaging format (Tape & Reel versus Cut Tape & Digi-Reel) affect circuit performance?

A: No. Packaging format affects only handling, storage, and assembly logistics. Electrical and mechanical performance of the component itself is independent of packaging format.

Q: Can these parts be used interchangeably in existing designs without PCB modification?

A: Yes. All substitute parts conform to the 0805 (2012 Metric) package standard with identical footprint dimensions (0.079" L x 1.25mm W, 2.00mm x 1.25mm). PCB modifications are not required for substitution.