RCS2012F7150CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012F7150CS is a 715 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in 0805 (2012 Metric) package format. This component features anti-sulfur and moisture-resistant properties with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is currently in active production status with 941 pieces available in inventory. Equivalent and substitute parts are identified when electrical specifications, mechanical dimensions, and environmental ratings align with the original component's functional requirements.

Substiute Parts

RCS2012F7150CS

Samsung Electro-MechanicsIn Stock: 980RCS2012F7150CS Datasheet

Current PartRFQ

RC2012F7150CS

Samsung Electro-MechanicsIn Stock: 902RC2012F7150CS Datasheet

SimilarRFQ

CRCW0805715RFKEA

Vishay DaleIn Stock: 44194CRCW0805715RFKEA Datasheet

SimilarRFQ

ERJ-6ENF7150V

Panasonic Electronic ComponentsIn Stock: 74795ERJ-6ENF7150V Datasheet

SimilarRFQ

RC0805FR-07715RL

YAGEOIn Stock: 5482RC0805FR-07715RL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS2012F7150CS is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• Resistance value: 715 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these electrical and mechanical specifications. Variations in packaging format (Tape & Reel versus Cut Tape) and minor differences in seated height do not affect functional equivalence. Automotive-rated variants (AEC-Q200) represent qualified alternatives for applications requiring enhanced reliability standards.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical compatibility with the RCS2012F7150CS. Selection among alternatives is based on the following factors:

Packaging Format Consideration: RC2012F7150CS is supplied in Cut Tape format, suitable for applications requiring manual component placement or lower-volume assembly operations. All other substitutes are supplied in Tape & Reel format, optimized for automated pick-and-place assembly.

Automotive Applications: CRCW0805715RFKEA (Vishay Dale) and ERJ-6ENF7150V (Panasonic) carry AEC-Q200 automotive qualification ratings. These variants are specified for applications requiring automotive-grade reliability and traceability standards.

Inventory Availability: CRCW0805715RFKEA demonstrates the highest inventory level (44,132 pieces), followed by ERJ-6ENF7150V (74,703 pieces), providing supply chain flexibility for high-volume production requirements.

Seated Height Variation: Component height ranges from 0.50mm (CRCW0805715RFKEA) to 0.70mm (ERJ-6ENF7150V). This variation is within standard PCB design tolerances and does not affect functional performance in standard 0805 footprint applications.

Manufacturer Continuity: RC2012F7150CS maintains the same manufacturer (Samsung Electro-Mechanics) as the primary part, differing only in packaging format, and represents the closest functional equivalent.

Frequently Asked Questions (FAQ)

Q: Can RC2012F7150CS replace RCS2012F7150CS in production?

A: Yes. Both parts are manufactured by Samsung Electro-Mechanics with identical electrical specifications (715 Ω ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C). The difference is packaging format: RC2012F7150CS is supplied in Cut Tape while RCS2012F7150CS is supplied in Tape & Reel. Functional performance is equivalent.

Q: Are automotive-rated substitutes (CRCW0805715RFKEA, ERJ-6ENF7150V) interchangeable with the standard RCS2012F7150CS?

A: Yes, for electrical and mechanical compatibility. Both automotive-qualified parts meet all electrical specifications of the RCS2012F7150CS. Automotive qualification (AEC-Q200) represents an additional quality and reliability standard. Use automotive-rated parts when application requirements specify automotive-grade components or enhanced reliability standards.

Q: Does the seated height difference (0.50mm to 0.70mm) affect PCB design?

A: No. All substitute parts maintain the standard 0805 (2012 Metric) package footprint. Height variations of ±0.20mm fall within standard PCB assembly tolerances and do not require design modifications.

Q: Which substitute offers the best supply chain availability?

A: CRCW0805715RFKEA (Vishay Dale) provides the highest inventory level at 44,132 pieces, followed by ERJ-6ENF7150V (Panasonic) at 74,703 pieces. Both support high-volume production requirements.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All identified substitute parts carry ROHS3 compliance certification and unlimited moisture sensitivity level (MSL 1), matching the environmental and regulatory status of the RCS2012F7150CS.

Q: Can I mix different manufacturers' parts in the same production batch?

A: Yes. All substitute parts meet identical electrical specifications, tolerance, power rating, and operating temperature range. Cross-manufacturer substitution is functionally valid. Verify procurement and quality documentation requirements with your supply chain management process.