RCS2012F6980CS Equivalent & Substitute Parts

Part Overview

The RCS2012F6980CS is a 698 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur and moisture-resistant construction. The part maintains Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component's functional requirements.

Substiute Parts

RCS2012F6980CS

Samsung Electro-MechanicsIn Stock: 840RCS2012F6980CS Datasheet

Current PartRFQ

CRCW0805698RFKEA

Vishay DaleIn Stock: 26324CRCW0805698RFKEA Datasheet

SimilarRFQ

ERJ-6ENF6980V

Panasonic Electronic ComponentsIn Stock: 84778ERJ-6ENF6980V Datasheet

SimilarRFQ

RC0805FR-07698RL

YAGEOIn Stock: 21455RC0805FR-07698RL Datasheet

SimilarRFQ

RMCF0805FT698R

Stackpole Electronics IncIn Stock: 25202RMCF0805FT698R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F6980CS are qualified based on strict equivalence of the following parameters:

Electrical Specifications: Resistance value (698 Ohms), tolerance (±1%), and power rating (0.125W) must be identical across all substitute candidates.

Package Compatibility: All substitute parts must use the 0805 (2012 Metric) package format with two terminations to ensure mechanical and electrical compatibility with existing PCB layouts.

Environmental Specifications: Operating temperature range (-55°C ~ 155°C) and temperature coefficient (±100ppm/°C) must match the original component.

Compliance Requirements: All substitute parts must maintain RoHS3 compliance and MSL 1 rating to satisfy regulatory and manufacturing process requirements.

Composition: Thick film construction is maintained across all substitutes to preserve electrical performance characteristics.

The four identified substitute parts meet all these criteria while originating from different manufacturers (Vishay Dale, Panasonic Electronic Components, YAGEO, and Stackpole Electronics Inc), providing supply chain flexibility without compromising functional or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts maintain full electrical and mechanical equivalence to the RCS2012F6980CS. Selection among these alternatives is determined by supply availability, lead time, and specific application requirements rather than functional differences.

CRCW0805698RFKEA (Vishay Dale): Carries AEC-Q200 automotive qualification and offers the lowest seated height (0.020" / 0.50mm), providing advantages for space-constrained applications. Inventory availability is 26,253 units.

ERJ-6ENF6980V (Panasonic Electronic Components): Qualified to AEC-Q200 automotive standards with the highest seated height (0.028" / 0.70mm). Largest inventory stock at 84,678 units, supporting high-volume production requirements.

RC0805FR-07698RL (YAGEO): Features moisture-resistant construction matching the original part's environmental protection. Seated height of 0.024" (0.60mm) provides mid-range profile. Inventory of 21,414 units.

RMCF0805FT698R (Stackpole Electronics Inc): AEC-Q200 automotive qualified with seated height of 0.026" (0.65mm), matching the original component's profile. Inventory of 25,172 units supports standard production volumes.

All parts are Active status products with RoHS3 compliance and unlimited moisture sensitivity rating, ensuring regulatory compliance and manufacturing process compatibility.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805698RFKEA replace RCS2012F6980CS in any application?

A: Yes. Both parts share identical electrical specifications (698 Ohms ±1%, 0.125W), operate across the same temperature range (-55°C ~ 155°C), and use the 0805 package format. The primary difference is seated height (0.020" vs 0.026"), which is relevant only for applications with strict height constraints.

Q: What is the significance of AEC-Q200 qualification on substitute parts?

A: AEC-Q200 is an automotive industry qualification standard. CRCW0805698RFKEA, ERJ-6ENF6980V, and RMCF0805FT698R carry this certification, indicating suitability for automotive applications. The original RCS2012F6980CS does not list this qualification but remains suitable for non-automotive applications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All five parts (original and four substitutes) are RoHS3 compliant with MSL 1 (unlimited moisture sensitivity), meeting current regulatory requirements for lead-free and hazardous substance restrictions.

Q: Does seated height variation affect PCB assembly compatibility?

A: Seated height differences (0.020" to 0.028") are within standard 0805 package tolerances and do not affect PCB assembly compatibility. Selection based on height is relevant only for applications with specific clearance or stacking requirements.

Q: Why do substitute parts have different inventory levels?

A: Inventory levels reflect current stock at the time of data collection and vary by distributor, manufacturing capacity, and market demand. Higher inventory does not indicate superior quality or performance.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. All substitute parts are direct functional equivalents with identical electrical performance, operating range, and package dimensions. No design modifications are required for substitution.