RCS2012F60R4CS Equivalent & Substitute Parts

Part Overview

The RCS2012F60R4CS is a 60.4 Ohm ±1% 1/8W (0.125W) thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with anti-sulfur and moisture-resistant construction. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RCS2012F60R4CS

Samsung Electro-MechanicsIn Stock: 828RCS2012F60R4CS Datasheet

Current PartRFQ

AC0805FR-0760R4L

YAGEOIn Stock: 96507AC0805FR-0760R4L Datasheet

SimilarRFQ

CRCW080560R4FKEA

Vishay DaleIn Stock: 15341CRCW080560R4FKEA Datasheet

SimilarRFQ

CRCW080560R4FKEAHP

Vishay DaleIn Stock: 104239CRCW080560R4FKEAHP Datasheet

SimilarRFQ

ERJ-6ENF60R4V

Panasonic Electronic ComponentsIn Stock: 127665ERJ-6ENF60R4V Datasheet

SimilarRFQ

RC0805FR-0760R4L

YAGEOIn Stock: 265932RC0805FR-0760R4L Datasheet

SimilarRFQ

RCS080560R4FKEA

Vishay DaleIn Stock: 68874RCS080560R4FKEA Datasheet

SimilarRFQ

RMCF0805FT60R4

Stackpole Electronics IncIn Stock: 180021RMCF0805FT60R4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 60.4 Ohms
• Tolerance: ±1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• MSL: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) are direct equivalents. Parts rated at 0.5W (1/2W) are functionally compatible as higher power-rated components in the same package, provided circuit design accommodates the increased thermal characteristics.
• Packaging Format: Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® are interchangeable from an electrical and mechanical standpoint; selection depends on procurement and assembly requirements.
• Height - Seated (Max): Variations within 0.026" to 0.028" (0.50mm to 0.70mm) are acceptable within 0805 package specifications.

Substitute parts meeting these criteria are listed below.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring compatibility with standard manufacturing and storage protocols. Selection between equivalent 0.125W-rated parts (AC0805FR-0760R4L, CRCW080560R4FKEA, ERJ-6ENF60R4V, RC0805FR-0760R4L, RMCF0805FT60R4) is based on procurement availability, packaging format preference (Tape & Reel versus Cut Tape), and supply chain logistics.

Higher power-rated variants (CRCW080560R4FKEAHP, RCS080560R4FKEA) rated at 0.5W (1/2W) are functionally compatible substitutes when circuit design permits increased thermal dissipation capacity. These components occupy the same 0805 package footprint and maintain identical electrical specifications, enabling direct PCB placement without layout modification.

Packaging format selection between Tape & Reel and Cut Tape & Digi-Reel® does not affect electrical or mechanical performance; choice depends on assembly equipment compatibility and inventory management requirements.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 0.5W-rated resistor for the original 0.125W RCS2012F60R4CS?

A: Yes. The CRCW080560R4FKEAHP and RCS080560R4FKEA are functionally compatible substitutes. Both maintain identical resistance, tolerance, temperature coefficient, and operating temperature range. The higher power rating provides additional thermal margin without affecting circuit operation. PCB layout and thermal management design remain unchanged.

Q: Are Tape & Reel and Cut Tape packaging formats interchangeable?

A: From an electrical and mechanical standpoint, yes. Both packaging formats contain identical components with the same performance specifications. Selection depends on assembly equipment capability and procurement workflow. Tape & Reel format suits high-volume automated assembly; Cut Tape & Digi-Reel® accommodates mixed-component pick-and-place operations.

Q: What is the significance of the height variation (0.020" to 0.028") among substitute parts?

A: All listed parts conform to 0805 (2012 Metric) package specifications. Height variations within this range do not affect PCB assembly, solder joint formation, or electrical performance. Standard pick-and-place equipment and reflow processes accommodate this tolerance band without adjustment.

Q: Do all substitute parts carry AEC-Q200 automotive qualification?

A: The original RCS2012F60R4CS does not list AEC-Q200 certification. Substitute parts AC0805FR-0760R4L, CRCW080560R4FKEA, CRCW080560R4FKEAHP, ERJ-6ENF60R4V, RCS080560R4FKEA, and RMCF0805FT60R4 carry AEC-Q200 rating. RC0805FR-0760R4L does not list this certification. AEC-Q200 qualification is not required for direct substitution but indicates additional reliability testing for automotive applications.

Q: Can I use RC0805FR-0760R4L as a substitute if AEC-Q200 certification is not required?

A: Yes. RC0805FR-0760R4L meets all mandatory electrical and mechanical parameters: 60.4 Ohms ±1%, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, ROHS3 compliance, and MSL Level 1. Absence of AEC-Q200 certification does not affect substitution eligibility for non-automotive applications.

Q: What determines whether a part qualifies as a substitute?

A: Substitution eligibility requires exact matching of resistance value, tolerance, package type, composition, temperature coefficient, operating temperature range, RoHS status, and MSL rating. Power rating variation from 0.125W to 0.5W is allowable as a higher-rated equivalent. Packaging format (Tape & Reel versus Cut Tape) does not affect substitution eligibility.