RCS2012F5763CS Equivalent & Substitute Parts

Part Overview

The RCS2012F5763CS is a 576 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status and features anti-sulfur and moisture-resistant construction. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are necessary to address supply chain continuity, inventory availability, or specific application requirements such as automotive qualification.

Substiute Parts

RCS2012F5763CS

Samsung Electro-MechanicsIn Stock: 951RCS2012F5763CS Datasheet

Current PartRFQ

CRCW0805576KFKEA

Vishay DaleIn Stock: 18013CRCW0805576KFKEA Datasheet

SimilarRFQ

ERJ-6ENF5763V

Panasonic Electronic ComponentsIn Stock: 41604ERJ-6ENF5763V Datasheet

SimilarRFQ

RC0805FR-07576KL

YAGEOIn Stock: 8577RC0805FR-07576KL Datasheet

SimilarRFQ

RMCF0805FT576K

Stackpole Electronics IncIn Stock: 9518RMCF0805FT576K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS2012F5763CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 576 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3
• Moisture sensitivity level: 1 (Unlimited)
• Termination count: 2

All four substitute parts listed meet these mandatory parameters. Differences exist only in manufacturer-specific features (such as automotive AEC-Q200 qualification for certain substitutes) and minor physical height variations, which do not affect electrical equivalence or PCB assembly compatibility within standard 0805 footprint tolerances.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are electrically and mechanically equivalent to the RCS2012F5763CS and are suitable for direct replacement in applications requiring 576 kOhms ±1% 0.125W 0805 thick film resistors.

CRCW0805576KFKEA (Vishay Dale): Carries automotive AEC-Q200 qualification. Lowest seated height at 0.020" (0.50mm). Suitable for automotive and industrial applications requiring enhanced reliability standards. Inventory availability: 17,927 pieces.

ERJ-6ENF5763V (Panasonic Electronic Components): Carries automotive AEC-Q200 qualification. Highest seated height at 0.028" (0.70mm). Suitable for automotive and industrial applications. Highest inventory availability: 41,501 pieces.

RC0805FR-07576KL (YAGEO): Features moisture-resistant construction. Seated height 0.024" (0.60mm). Suitable for general industrial and consumer applications. Inventory availability: 8,534 pieces.

RMCF0805FT576K (Stackpole Electronics Inc): Carries automotive AEC-Q200 qualification. Seated height 0.026" (0.65mm). Suitable for automotive and industrial applications. Inventory availability: 9,442 pieces.

All parts comply with ROHS3 and REACH requirements. Selection should be based on application-specific requirements such as automotive qualification needs and PCB assembly clearance constraints related to component height.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805576KFKEA replace RCS2012F5763CS in any application?

A: Yes. Both parts share identical electrical specifications (576 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C) and package footprint (0805). The CRCW0805576KFKEA has a lower seated height (0.020" vs 0.026"), which is compatible with standard PCB assembly processes. The automotive AEC-Q200 qualification of the Vishay part is an additional feature not present in the Samsung part.

Q: What is the significance of AEC-Q200 qualification on substitute parts?

A: AEC-Q200 is an automotive industry standard for passive components. Three of the four substitutes (CRCW0805576KFKEA, ERJ-6ENF5763V, RMCF0805FT576K) carry this qualification. If your application does not require automotive qualification, this feature does not affect substitution eligibility. If automotive qualification is required, select from these three options.

Q: Are there physical compatibility concerns with the different seated heights?

A: Seated heights range from 0.020" (0.50mm) to 0.028" (0.70mm). All values fall within standard 0805 component height tolerances and are compatible with automated PCB assembly equipment. Height differences do not affect electrical performance or standard PCB layout requirements.

Q: Do all substitutes have the same moisture sensitivity level?

A: Yes. All parts, including the main part RCS2012F5763CS, have MSL 1 (Unlimited) rating. This indicates no moisture sensitivity concerns and no special storage or handling requirements.

Q: Which substitute has the highest inventory availability?

A: ERJ-6ENF5763V (Panasonic) has the highest inventory at 41,501 pieces. This may be relevant for high-volume production requirements or extended supply chain planning.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All five parts (main part and four substitutes) are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.