Equivalent & Substitute Parts for RCS2012F5361CS

Part Overview

The RCS2012F5361CS is a 5.36 kOhms ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without functional degradation.

Substiute Parts

RCS2012F5361CS

Samsung Electro-MechanicsIn Stock: 904RCS2012F5361CS Datasheet

Current PartRFQ

CRCW08055K36FKEA

Vishay DaleIn Stock: 10189CRCW08055K36FKEA Datasheet

SimilarRFQ

ERJ-6ENF5361V

Panasonic Electronic ComponentsIn Stock: 38993ERJ-6ENF5361V Datasheet

SimilarRFQ

ERJ-P06F5361V

Panasonic Electronic ComponentsIn Stock: 11064ERJ-P06F5361V Datasheet

SimilarRFQ

RC0805FR-075K36L

YAGEOIn Stock: 108358RC0805FR-075K36L Datasheet

SimilarRFQ

RMCF0805FT5K36

Stackpole Electronics IncIn Stock: 26042RMCF0805FT5K36 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F5361CS are classified based on strict electrical and mechanical parameter alignment. The substitution logic is structured as follows:

Primary Substitution Criteria (Non-Negotiable):

• Resistance value: 5.36 kOhms
• Tolerance: ±1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Secondary Consideration (Application-Dependent):

• Power Rating: 0.125W (1/8W) for direct equivalence; 0.5W (1/2W) for applications requiring higher thermal margin
• Automotive Certification: AEC-Q200 available on select substitutes for automotive-grade applications

All identified substitute parts maintain identical electrical specifications and package dimensions. Variations in maximum seated height and automotive certifications are noted for application-specific selection.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalence (0.125W Power Rating):

CRCW08055K36FKEA (Vishay Dale), ERJ-6ENF5361V (Panasonic), RC0805FR-075K36L (YAGEO), and RMCF0805FT5K36 (Stackpole) are electrically and mechanically equivalent to the RCS2012F5361CS. All maintain identical resistance, tolerance, temperature coefficient, and operating temperature specifications. All substitute parts are ROHS3 compliant with MSL 1 rating. Selection among these four options is determined by:

• Packaging format preference: CRCW08055K36FKEA, ERJ-6ENF5361V, and RMCF0805FT5K36 are supplied in Tape & Reel (TR); RC0805FR-075K36L is available in Cut Tape (CT) & Digi-Reel®
• Automotive application requirements: CRCW08055K36FKEA, ERJ-6ENF5361V, and RMCF0805FT5K36 carry AEC-Q200 certification
• Physical height constraints: CRCW08055K36FKEA offers minimum seated height at 0.020" (0.50mm)

Higher Power Rating Option:

ERJ-P06F5361V (Panasonic) provides 0.5W (1/2W) power rating while maintaining all other electrical specifications. This component is suitable for applications requiring thermal margin beyond the 0.125W specification. AEC-Q200 certification and pulse withstanding capability are included. Selection of this part requires confirmation that circuit board layout and thermal design accommodate the increased power dissipation capacity.

Product Status and Compliance:

All identified substitute parts maintain Active product status. All are ROHS3 compliant and REACH unaffected. No regulatory or compliance barriers exist for substitution.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06F5361V (0.5W) be used as a direct replacement for RCS2012F5361CS (0.125W)?

A: ERJ-P06F5361V is electrically compatible with identical resistance, tolerance, and temperature specifications. The higher power rating does not create functional incompatibility. However, circuit design must confirm that the application does not require the specific 0.125W thermal dissipation characteristic. If the circuit is designed for 0.125W operation, the 0.5W substitute will not degrade performance.

Q: Are all substitute parts suitable for automotive applications?

A: CRCW08055K36FKEA, ERJ-6ENF5361V, ERJ-P06F5361V, and RMCF0805FT5K36 carry AEC-Q200 automotive certification. RC0805FR-075K36L and RCS2012F5361CS do not have automotive certification. Selection depends on application requirements.

Q: What is the significance of the seated height variation among substitute parts?

A: Seated height ranges from 0.020" (0.50mm) to 0.028" (0.70mm). This variation is within typical PCB assembly tolerances for 0805 components. Selection is relevant only if circuit board design includes height-constrained areas or specific clearance requirements.

Q: Do all substitute parts have identical moisture sensitivity levels?

A: Yes. All substitute parts and the original RCS2012F5361CS are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or reflow processing.

Q: Which substitute part offers the highest inventory availability?

A: RC0805FR-075K36L (YAGEO) has 108,281 pieces in stock. ERJ-6ENF5361V (Panasonic) has 38,927 pieces. RMCF0805FT5K36 (Stackpole) has 26,027 pieces. CRCW08055K36FKEA (Vishay Dale) has 10,100 pieces.

Q: Can substitute parts be mixed within a single assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixed sourcing from multiple manufacturers does not create functional or reliability concerns provided all parts meet the specified parameters.

Q: What packaging formats are available for substitute parts?

A: Tape & Reel (TR) is available for CRCW08055K36FKEA, ERJ-6ENF5361V, ERJ-P06F5361V, and RMCF0805FT5K36. Cut Tape (CT) & Digi-Reel® is available for RC0805FR-075K36L. Packaging selection depends on assembly process requirements and order quantity.