RCS2012F3571CS Equivalent & Substitute Parts

Part Overview

The RCS2012F3571CS is a 3.57 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The part features anti-sulfur and moisture-resistant properties with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The RCS2012F3571CS maintains Active product status with 751 pieces currently in stock. Equivalent and substitute parts are identified when alternative manufacturers offer components with matching electrical specifications, mechanical dimensions, and compliance certifications suitable for direct circuit board replacement.

Substiute Parts

RCS2012F3571CS

Samsung Electro-MechanicsIn Stock: 845RCS2012F3571CS Datasheet

Current PartRFQ

CRCW08053K57FKEA

Vishay DaleIn Stock: 15238CRCW08053K57FKEA Datasheet

SimilarRFQ

ERJ-6ENF3571V

Panasonic Electronic ComponentsIn Stock: 44835ERJ-6ENF3571V Datasheet

SimilarRFQ

RC0805FR-073K57L

YAGEOIn Stock: 50676RC0805FR-073K57L Datasheet

SimilarRFQ

RMCF0805FT3K57

Stackpole Electronics IncIn Stock: 43957RMCF0805FT3K57 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RCS2012F3571CS is determined by strict equivalence across the following critical parameters: resistance value (3.57 kOhms), tolerance (±1%), power rating (0.125W), package format (0805 / 2012 Metric), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and compliance certifications (RoHS3, REACH Unaffected). All identified substitute parts match these specifications exactly. Packaging format variations (Tape & Reel versus Cut Tape) do not affect electrical or mechanical compatibility. Physical height differences within the 0805 package envelope remain within acceptable PCB assembly tolerances. Automotive AEC-Q200 certification present on certain substitutes represents an additional qualification level and does not preclude use in non-automotive applications.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical equivalence to the RCS2012F3571CS. Selection among these alternatives is based on availability, packaging preference, and application-specific certifications.

CRCW08053K57FKEA (Vishay Dale) carries AEC-Q200 automotive qualification and is suitable for applications requiring automotive-grade components. This part exhibits the lowest seated height at 0.020 inches (0.50mm), which may provide advantages in space-constrained PCB layouts.

ERJ-6ENF3571V (Panasonic Electronic Components) also carries AEC-Q200 automotive qualification with the highest inventory availability at 44,749 pieces. The seated height of 0.028 inches (0.70mm) remains within standard 0805 package tolerances.

RC0805FR-073K57L (YAGEO) is packaged in Cut Tape format with Digi-Reel® option, offering flexibility for applications requiring smaller order quantities. This part features moisture-resistant properties matching the original specification.

RMCF0805FT3K57 (Stackpole Electronics Inc) provides AEC-Q200 automotive qualification with seated height of 0.026 inches (0.65mm), matching the original part's height specification.

All substitute parts comply with RoHS3 and REACH requirements. Selection should be based on supply chain availability, packaging format requirements, and whether automotive-grade certification is mandated by application specifications.

Frequently Asked Questions (FAQ)

Q: Can CRCW08053K57FKEA be used as a direct replacement for RCS2012F3571CS?

A: Yes. Both components share identical electrical specifications (3.57 kOhms ±1%, 0.125W), operate across the same temperature range (-55°C to 155°C), and are packaged in the 0805 (2012 Metric) format. Physical height differences (0.020" versus 0.026") remain within standard 0805 package tolerances and do not affect PCB assembly compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly equipment. Cut Tape packaging provides the same components cut from the reel for manual handling or smaller quantity applications. Electrical and mechanical specifications remain identical regardless of packaging format.

Q: Are the automotive AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. AEC-Q200 certification represents an additional qualification level meeting automotive industry standards. Components with this certification are fully compatible with non-automotive applications and offer equivalent or superior reliability characteristics.

Q: Does the height variation among substitute parts affect circuit board assembly?

A: No. All substitute parts maintain heights within the 0805 (2012 Metric) package specification envelope. Height variations ranging from 0.020" to 0.028" are within standard PCB assembly tolerances and do not affect solder joint formation, component placement, or electrical performance.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All identified substitute parts carry RoHS3 compliance certification and REACH Unaffected status, matching the original RCS2012F3571CS specifications.

Q: Can I mix different substitute part manufacturers in the same circuit board assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixing manufacturers within the same assembly does not affect circuit performance or reliability, provided all parts maintain the specified 3.57 kOhms ±1% resistance value and 0.125W power rating.