Request Quote
(Ships tomorrow)
RCS2012F3481CS Equivalent & Substitute Parts
Part Overview
The RCS2012F3481CS is a 3.48 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Resistance | 3.48 kOhms |
| Tolerance | ±1% |
| Power Rating | 0.125W (1/8W) |
| Package / Case | 0805 (2012 Metric) |
| Composition | Thick Film |
| Temperature Coefficient | ±100ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
| Number of Terminations | 2 |
Substitute Part Grouping Explanation
Substitute parts for the RCS2012F3481CS are qualified based on the following criteria:
Electrical Parameters: Resistance value of 3.48 kOhms, tolerance of ±1%, and power rating of 0.125W (1/8W) must be identical across all substitute candidates.
Mechanical Parameters: Package designation 0805 (2012 Metric) with two terminations is mandatory. Physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) must match.
Environmental & Thermal Specifications: Temperature coefficient of ±100ppm/°C and operating temperature range of -55°C ~ 155°C must be maintained.
Compliance & Certifications: All substitute parts must maintain ROHS3 compliance, MSL 1 rating, and REACH Unaffected status. ECCN and HTSUS classifications remain consistent across all qualified substitutes.
Composition: Thick film construction is required for all substitute candidates.
Parameter Comparison
| Parameter | RCS2012F3481CS (Samsung) | CRCW08053K48FKEA (Vishay Dale) | ERJ-6ENF3481V (Panasonic) | RC0805FR-073K48L (YAGEO) | RMCF0805FT3K48 (Stackpole) |
|---|---|---|---|---|---|
| Resistance | 3.48 kOhms | 3.48 kOhms | 3.48 kOhms | 3.48 kOhms | 3.48 kOhms |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% |
| Power Rating | 0.125W | 0.125W | 0.125W | 0.125W | 0.125W |
| Package / Case | 0805 (2012 Metric) | 0805 (2012 Metric) | 0805 (2012 Metric) | 0805 (2012 Metric) | 0805 (2012 Metric) |
| Composition | Thick Film | Thick Film | Thick Film | Thick Film | Thick Film |
| Temperature Coefficient | ±100ppm/°C | ±100ppm/°C | ±100ppm/°C | ±100ppm/°C | ±100ppm/°C |
| Operating Temperature | -55°C ~ 155°C | -55°C ~ 155°C | -55°C ~ 155°C | -55°C ~ 155°C | -55°C ~ 155°C |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| MSL Rating | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| Height - Seated (Max) | 0.026" (0.66mm) | 0.020" (0.50mm) | 0.028" (0.70mm) | 0.024" (0.60mm) | 0.026" (0.65mm) |
| Packaging | Tape & Reel (TR) | Tape & Reel (TR) | Tape & Reel (TR) | Tape & Reel (TR) | Tape & Reel (TR) |
Engineering Selection Recommendations
All four substitute parts (CRCW08053K48FKEA, ERJ-6ENF3481V, RC0805FR-073K48L, RMCF0805FT3K48) meet the core electrical and mechanical requirements for direct substitution with the RCS2012F3481CS.
CRCW08053K48FKEA (Vishay Dale): Carries AEC-Q200 automotive qualification. Seated height of 0.020" (0.50mm) is the lowest among all candidates, providing maximum PCB clearance margin. ROHS3 and MSL 1 compliant.
ERJ-6ENF3481V (Panasonic Electronic Components): Carries AEC-Q200 automotive qualification. Seated height of 0.028" (0.70mm) is the highest among candidates. ROHS3 and MSL 1 compliant. Highest inventory availability at 83,117 pieces.
RC0805FR-073K48L (YAGEO): Standard industrial-grade thick film resistor with moisture-resistant features. Seated height of 0.024" (0.60mm). ROHS3 and MSL 1 compliant. Highest inventory stock at 175,122 pieces.
RMCF0805FT3K48 (Stackpole Electronics Inc): Carries AEC-Q200 automotive qualification. Seated height of 0.026" (0.65mm) matches the original RCS2012F3481CS specification. ROHS3 and MSL 1 compliant.
Selection between these parts depends on application requirements: automotive-grade applications benefit from AEC-Q200 rated parts; standard industrial applications accept any of the four options; PCB layout constraints may favor lower-profile options such as CRCW08053K48FKEA.
Frequently Asked Questions (FAQ)
Q: Can CRCW08053K48FKEA replace RCS2012F3481CS in all applications?
A: CRCW08053K48FKEA meets all electrical and mechanical specifications. The primary difference is AEC-Q200 automotive qualification and lower seated height (0.020" vs 0.026"). Substitution is valid for applications where these differences do not create constraints.
Q: What is the significance of the seated height variation among substitute parts?
A: Seated height ranges from 0.020" (CRCW08053K48FKEA) to 0.028" (ERJ-6ENF3481V). This variation affects PCB clearance and component stacking in high-density layouts. Verify PCB design clearance specifications before selection.
Q: Are all substitute parts ROHS3 compliant?
A: All four substitute parts carry ROHS3 compliance certification, matching the original RCS2012F3481CS specification.
Q: What does AEC-Q200 qualification indicate?
A: AEC-Q200 is an automotive industry standard qualification for passive components. CRCW08053K48FKEA, ERJ-6ENF3481V, and RMCF0805FT3K48 carry this certification. Non-automotive applications do not require this qualification.
Q: Is moisture sensitivity level identical across all parts?
A: All parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.
Q: Can these parts be used interchangeably in tape and reel packaging?
A: All substitute parts are supplied in Tape & Reel (TR) packaging format, compatible with standard pick-and-place assembly equipment.
Q: What is the tolerance specification for all parts?
A: All parts maintain ±1% tolerance on the 3.48 kOhms resistance value, ensuring equivalent circuit performance.
Q: Are there differences in temperature coefficient performance?
A: All parts specify ±100ppm/°C temperature coefficient with identical operating range of -55°C ~ 155°C, ensuring equivalent thermal performance.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts




