RCS2012F3160CS Equivalent & Substitute Parts

Part Overview

The RCS2012F3160CS is a 316 Ohms ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without performance degradation.

Substiute Parts

RCS2012F3160CS

Samsung Electro-MechanicsIn Stock: 1100RCS2012F3160CS Datasheet

Current PartRFQ

CRCW0805316RFKEA

Vishay DaleIn Stock: 14027CRCW0805316RFKEA Datasheet

SimilarRFQ

ERJ-6ENF3160V

Panasonic Electronic ComponentsIn Stock: 60452ERJ-6ENF3160V Datasheet

SimilarRFQ

RC0805FR-07316RL

YAGEOIn Stock: 126247RC0805FR-07316RL Datasheet

SimilarRFQ

RMCF0805FT316R

Stackpole Electronics IncIn Stock: 3828RMCF0805FT316R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS2012F3160CS is determined by strict equivalence across the following parameters:

Electrical Equivalence: Resistance value of 316 Ohms, tolerance of ±1%, and power rating of 0.125W (1/8W) are mandatory. Temperature coefficient of ±100ppm/°C and operating temperature range of -55°C ~ 155°C must match.

Mechanical Equivalence: Package designation 0805 (2012 Metric) with identical physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two terminations are required for direct PCB compatibility.

Compliance Equivalence: ROHS3 compliance, Moisture Sensitivity Level 1, and REACH Unaffected status must be maintained. Composition as thick film is required.

All four identified substitute parts meet these criteria. Additional features such as Automotive AEC-Q200 certification or anti-sulfur properties represent enhanced specifications that do not disqualify substitution but indicate application-specific suitability.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are qualified equivalents to the RCS2012F3160CS based on electrical, mechanical, and compliance parameter alignment. Selection among substitutes is determined by application requirements and certification needs:

CRCW0805316RFKEA (Vishay Dale): Suitable for automotive applications requiring AEC-Q200 qualification. Inventory availability is 13,950 units.

ERJ-6ENF3160V (Panasonic Electronic Components): Qualified for automotive AEC-Q200 applications with highest inventory availability at 60,425 units. Height-seated maximum of 0.028" (0.70mm) is within tolerance.

RC0805FR-07316RL (YAGEO): General-purpose industrial applications with moisture-resistant characteristics. Largest inventory stock of 126,216 units. Height-seated maximum of 0.024" (0.60mm) represents lowest profile option.

RMCF0805FT316R (Stackpole Electronics Inc): Automotive AEC-Q200 qualified component with 3,750 units in stock. Height-seated maximum of 0.026" (0.65mm) aligns closely with original specification.

All parts maintain ROHS3 compliance, MSL Level 1 rating, and REACH Unaffected status. Selection should prioritize application-specific certifications and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805316RFKEA replace RCS2012F3160CS in non-automotive applications?

A: Yes. CRCW0805316RFKEA meets all electrical and mechanical equivalence criteria. AEC-Q200 certification is an additional qualification that does not restrict use in non-automotive circuits.

Q: What is the significance of the height-seated maximum variation among substitutes?

A: Height-seated maximum values (0.020" to 0.028") represent component profile after soldering. All values remain within acceptable PCB assembly tolerances for 0805 package format. Selection should consider specific PCB clearance requirements if space constraints exist.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitutes are supplied in Tape & Reel (TR) packaging format, maintaining compatibility with automated assembly processes.

Q: Does moisture-resistant or anti-sulfur feature affect substitution eligibility?

A: No. These features represent enhanced environmental protection but are not mandatory for electrical or mechanical equivalence. Components with these features are suitable substitutes for applications without such requirements.

Q: Which substitute offers the best inventory availability?

A: RC0805FR-07316RL (YAGEO) provides the highest inventory stock at 126,216 units, followed by ERJ-6ENF3160V (Panasonic) at 60,425 units.

Q: Are all substitutes compliant with current regulatory standards?

A: Yes. All substitute parts maintain ROHS3 compliance and REACH Unaffected status, meeting current regulatory requirements for electronic component distribution and use.