Equivalent & Substitute Parts for RCS2012F302CS

Part Overview

The RCS2012F302CS is a 3 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. The part is ROHS3 compliant and REACH unaffected, suitable for general-purpose and industrial applications requiring stable resistive elements with tight tolerance specifications.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating) and mechanical compatibility (package size, termination type, operating temperature range). Substitutes may vary in packaging format, manufacturer-specific features, and height specifications while maintaining functional equivalence.

Key Parameters

Parameter	Value
Resistance	3 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution logic for the RCS2012F302CS is based on the following critical parameters:

Primary Matching Criteria:

Resistance value: 3 kOhms
Tolerance: ±1%
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature: -55°C ~ 155°C
Number of Terminations: 2
RoHS3 Compliance
MSL Level 1

Secondary Consideration:

Power rating may vary (0.125W, 0.4W, or 0.5W) depending on application requirements. Higher power ratings provide additional thermal margin but maintain electrical equivalence at the specified 0.125W operating point.

All substitute parts listed maintain identical electrical characteristics and mechanical compatibility with the main part. Variations in packaging format (Tape & Reel vs. Cut Tape), height specifications, and manufacturer-specific features do not affect functional substitution within the 0805 package footprint.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp (°C)	Height Max (mm)	Packaging	RoHS3	MSL
RCS2012F302CS	Samsung Electro-Mechanics	3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.66	Tape & Reel	Yes	1
AC0805FR-073KL	YAGEO	3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.60	Cut Tape & Digi-Reel	Yes	1
CRCW08053K00FKEA	Vishay Dale	3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.50	Cut Tape & Digi-Reel	Yes	1
CRCW08053K00FKEAHP	Vishay Dale	3 kΩ	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	0.50	Tape & Reel	Yes	1
ERJ-6ENF3001V	Panasonic Electronic Components	3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.70	Cut Tape & Digi-Reel	Yes	1
ESR10EZPF3001	Rohm Semiconductor	3 kΩ	±1%	0.4	0805	±100ppm/°C	-55 ~ 155	0.65	Tape & Reel	Yes	1
RC0805FR-073KL	YAGEO	3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.60	Cut Tape & Digi-Reel	Yes	1
RCS08053K00FKEA	Vishay Dale	3 kΩ	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	0.50	Tape & Reel	Yes	1
RMCF0805FT3K00	Stackpole Electronics Inc	3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.65	Tape & Reel	Yes	1

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with RCS2012F302CS within the specified 0805 package footprint. Selection among equivalent parts should be based on the following factors:

Packaging Format Compatibility: Tape & Reel (TR) packaging is suitable for automated assembly processes. Cut Tape (CT) & Digi-Reel packaging provides flexibility for manual assembly or lower-volume production runs.

Power Rating Considerations: Parts rated at 0.125W (1/8W) are direct functional equivalents. Parts rated at 0.4W (2/5W) or 0.5W (1/2W) provide increased thermal margin and pulse withstanding capability while maintaining identical electrical performance at standard operating conditions.

Compliance and Certifications: All substitute parts are ROHS3 compliant and REACH unaffected. Parts with AEC-Q200 automotive qualification (AC0805FR-073KL, CRCW08053K00FKEA, CRCW08053K00FKEAHP, ERJ-6ENF3001V, ESR10EZPF3001, RCS08053K00FKEA, RMCF0805FT3K00) are suitable for automotive and industrial applications requiring enhanced reliability standards.

Manufacturer Availability: Inventory levels vary significantly among manufacturers. Selection should consider supply chain requirements and lead time constraints specific to production schedules.

Frequently Asked Questions (FAQ)

Q: Can CRCW08053K00FKEAHP (0.5W) be used as a direct replacement for RCS2012F302CS (0.125W)?

A: Yes. The CRCW08053K00FKEAHP is electrically equivalent with identical resistance (3 kOhms), tolerance (±1%), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). The higher power rating (0.5W vs. 0.125W) provides additional thermal capacity without affecting circuit performance at standard operating conditions. The 0805 package footprint is identical, ensuring mechanical compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape wound on reels, optimized for high-speed automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel packaging provides the same components on shorter tape lengths or alternative carrier formats, suitable for manual assembly, prototyping, or lower-volume production. Both formats contain identical components with no electrical or mechanical differences.

Q: Are AEC-Q200 qualified parts required for this application?

A: AEC-Q200 qualification is not required for general-purpose applications. However, parts with AEC-Q200 certification (such as AC0805FR-073KL, CRCW08053K00FKEA, ERJ-6ENF3001V, RMCF0805FT3K00) meet automotive industry reliability standards and are recommended for automotive, industrial, or mission-critical applications requiring enhanced quality assurance.

Q: Does height variation affect PCB assembly compatibility?

A: Height variations (0.50mm to 0.70mm maximum seated height) are within standard 0805 package specifications and do not affect PCB assembly compatibility. All listed parts are suitable for standard reflow soldering processes and automated assembly equipment configured for 0805 components.

Q: Can I substitute RC0805FR-073KL (moisture resistant only) for RCS2012F302CS (anti-sulfur, moisture resistant)?

A: RC0805FR-073KL is electrically and mechanically equivalent with identical electrical specifications. The main part includes anti-sulfur protection in addition to moisture resistance. For applications in high-sulfur environments, the anti-sulfur feature of RCS2012F302CS provides additional protection. For standard industrial environments, RC0805FR-073KL provides equivalent performance.

Q: What is Moisture Sensitivity Level (MSL) 1?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed parts have MSL 1 classification, meaning they can be stored indefinitely at standard conditions without special moisture control procedures prior to assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message