RCS2012F2613CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012F2613CS is a 261 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status and features anti-sulfur and moisture-resistant construction. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to ensure direct interchangeability in circuit applications.

Substiute Parts

RCS2012F2613CS

Samsung Electro-MechanicsIn Stock: 883RCS2012F2613CS Datasheet

Current PartRFQ

CRCW0805261KFKEA

Vishay DaleIn Stock: 19938CRCW0805261KFKEA Datasheet

SimilarRFQ

ERJ-6ENF2613V

Panasonic Electronic ComponentsIn Stock: 5332ERJ-6ENF2613V Datasheet

SimilarRFQ

RC0805FR-07261KL

YAGEOIn Stock: 59100RC0805FR-07261KL Datasheet

SimilarRFQ

RMCF0805FT261K

Stackpole Electronics IncIn Stock: 6011RMCF0805FT261K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F2613CS are qualified based on the following criteria:

Electrical Parameters (Critical for Substitution):

• Resistance value: 261 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C

Mechanical Parameters (Critical for Substitution):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance Parameters:

• RoHS3 Compliant
• Moisture Sensitivity Level: MSL 1 (Unlimited)

All substitute parts listed meet these core requirements. Variations in height (seated maximum) and specific feature sets (automotive AEC-Q200 certification, anti-sulfur properties, moisture resistance) do not affect functional interchangeability within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain identical electrical specifications and package compatibility with the RCS2012F2613CS. Selection among these alternatives is based on the following factors:

General Purpose Applications: RC0805FR-07261KL (YAGEO) offers the largest inventory availability (59,004 pcs) and standard moisture-resistant construction suitable for general industrial applications.

Automotive Applications: CRCW0805261KFKEA (Vishay Dale), ERJ-6ENF2613V (Panasonic), and RMCF0805FT261K (Stackpole) all carry AEC-Q200 automotive qualification and are suitable for automotive-grade circuit designs.

Compliance Considerations: All substitute parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99, matching the regulatory status of the primary part.

Physical Constraints: Height variations among substitutes (0.50mm to 0.70mm seated maximum) are within acceptable tolerances for 0805 package specifications and do not affect PCB assembly compatibility.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805261KFKEA replace RCS2012F2613CS in non-automotive applications?

A: Yes. CRCW0805261KFKEA meets all electrical and mechanical requirements for direct substitution. The AEC-Q200 automotive qualification is an additional feature that does not restrict use in general-purpose circuits.

Q: What is the significance of the height difference between substitute parts?

A: Height variations (0.50mm to 0.70mm) fall within standard 0805 package tolerances and do not affect PCB assembly, soldering, or electrical performance. Component placement and reflow processes remain unchanged.

Q: Are all substitute parts suitable for high-temperature applications?

A: Yes. All substitute parts and the primary part share the same operating temperature range of -55°C to 155°C and identical temperature coefficient of ±100ppm/°C, ensuring consistent performance across the full temperature spectrum.

Q: Does moisture sensitivity level MSL 1 apply to all listed parts?

A: Yes. All parts, including the primary RCS2012F2613CS and all substitutes, are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and unlimited shelf life under standard storage conditions.

Q: Can substitute parts with AEC-Q200 certification be used interchangeably with the non-automotive primary part?

A: Yes. AEC-Q200 certification represents an additional qualification standard and does not restrict interchangeability. Parts with automotive certification are fully compatible with applications using the primary part.

Q: What packaging format is used for all listed parts?

A: All parts are supplied in Tape & Reel (TR) format, standard for automated PCB assembly processes. Reel specifications and tape dimensions conform to industry standards for 0805 package components.