RCS2012F22R1CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012F22R1CS is a 22.1 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is designed for general-purpose SMD applications requiring precision resistance with moisture and anti-sulfur protection. The part is Active status and ROHS3 compliant, making it suitable for modern electronics manufacturing. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and packaging compatibility to ensure direct circuit board replacement capability.

Key Parameters

Parameter	Value	Specification Range
Resistance	22.1 Ohms	Exact value required
Tolerance	±1%	Precision grade
Power Rating	0.125W (1/8W)	Minimum acceptable
Package / Case	0805 (2012 Metric)	Footprint critical
Composition	Thick Film	Technology type
Temperature Coefficient	±100ppm/°C	Stability parameter
Operating Temperature	-55°C ~ 155°C	Environmental range
Terminations	2	Standard configuration
RoHS Status	ROHS3 Compliant	Regulatory requirement
Moisture Sensitivity Level	1 (Unlimited)	Handling classification

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F22R1CS are classified based on strict electrical and mechanical parameter matching. The primary substitution criteria are:

Critical Parameters (Must Match Exactly):

Resistance value: 22.1 Ohms
Tolerance: ±1%
Package / Case: 0805 (2012 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Number of Terminations: 2

Power Rating Consideration: Substitute parts with equal or higher power ratings (0.125W minimum) are acceptable. Parts rated at 0.5W (1/2W) provide additional thermal margin and are direct substitutes for applications where board space permits.

Compliance & Features: Parts are grouped by regulatory compliance (ROHS3 status) and optional certifications (AEC-Q200 automotive qualification). These do not restrict substitution but indicate enhanced qualification levels.

Packaging Format: Tape & Reel (TR) and Cut Tape (CT) formats are interchangeable from an electrical and mechanical standpoint; format selection depends on assembly process requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance (Ohms)	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op Temp (°C)	Height Max (mm)	RoHS Status	AEC-Q200
RCS2012F22R1CS	Samsung Electro-Mechanics	22.1	±1%	0.125	0805	±100	-55 ~ 155	0.66	ROHS3	No
RC2012F22R1CS	Samsung Electro-Mechanics	22.1	±1%	0.125	0805	±100	-55 ~ 155	0.65	ROHS3	No
CRCW080522R1FKEA	Vishay Dale	22.1	±1%	0.125	0805	±100	-55 ~ 155	0.50	ROHS3	Yes
CRCW080522R1FKEAHP	Vishay Dale	22.1	±1%	0.5	0805	±100	-55 ~ 155	0.50	ROHS3	Yes
CRCW080522R1FKTA	Vishay Dale	22.1	±1%	0.125	0805	±100	-55 ~ 155	0.50	RoHS Non-Compliant	Yes
ERJ-6ENF22R1V	Panasonic Electronic Components	22.1	±1%	0.125	0805	±100	-55 ~ 155	0.70	ROHS3	Yes
RC0805FR-0722R1L	YAGEO	22.1	±1%	0.125	0805	±100	-55 ~ 155	0.60	ROHS3	No
RCS080522R1FKEA	Vishay Dale	22.1	±1%	0.5	0805	±100	-55 ~ 155	0.50	ROHS3	Yes
RMCF0805FT22R1	Stackpole Electronics Inc	22.1	±1%	0.125	0805	±100	-55 ~ 155	0.65	ROHS3	Yes

Engineering Selection Recommendations

Direct Substitutes (Identical Electrical & Mechanical Specifications):

RC2012F22R1CS (Samsung Electro-Mechanics) is the closest equivalent, differing only in packaging format (Cut Tape vs. Tape & Reel) and negligible height variation (0.65mm vs. 0.66mm). Both are ROHS3 compliant and suitable for direct replacement.

RMCF0805FT22R1 (Stackpole Electronics Inc) provides identical electrical specifications with AEC-Q200 automotive qualification. Height is 0.65mm, within acceptable tolerance for 0805 footprints.

RC0805FR-0722R1L (YAGEO) matches all critical parameters with ROHS3 compliance. Height of 0.60mm is within standard 0805 package variation.

Automotive-Qualified Alternatives (AEC-Q200):

CRCW080522R1FKEA (Vishay Dale) provides AEC-Q200 qualification with reduced height (0.50mm), beneficial for space-constrained designs. Electrical specifications are identical.

ERJ-6ENF22R1V (Panasonic Electronic Components) offers AEC-Q200 qualification with highest inventory availability (98,873 pcs). Height of 0.70mm remains within 0805 specification.

Higher Power Rating Option:

CRCW080522R1FKEAHP (Vishay Dale) and RCS080522R1FKEA (Vishay Dale) both provide 0.5W (1/2W) power rating with identical resistance and tolerance. These are suitable when thermal margin or pulse withstanding capability is required.

Non-Compliant Alternative (Not Recommended for New Designs):

CRCW080522R1FKTA (Vishay Dale) is RoHS non-compliant and REACH affected. Use only in legacy system maintenance where original specification requires this exact part number.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC2012F22R1CS for RCS2012F22R1CS?

A: Yes. Both parts are manufactured by Samsung Electro-Mechanics with identical electrical specifications (22.1 Ohms ±1%, 0.125W, ±100ppm/°C). The difference is packaging format (Cut Tape vs. Tape & Reel) and height variation of 0.01mm (0.65mm vs. 0.66mm), which is within standard 0805 tolerance. Both are ROHS3 compliant.

Q: Are automotive-qualified parts (AEC-Q200) required for this application?

A: AEC-Q200 qualification is not required unless specified in your design requirements or customer specifications. Automotive-qualified alternatives (RMCF0805FT22R1, CRCW080522R1FKEA, ERJ-6ENF22R1V) are available but represent higher qualification levels. Selection depends on application environment and regulatory requirements.

Q: Can I use a 0.5W (1/2W) rated resistor instead of 0.125W (1/8W)?

A: Yes. Higher power ratings are acceptable substitutes. CRCW080522R1FKEAHP and RCS080522R1FKEA both provide 0.5W rating with identical resistance and tolerance. These parts offer additional thermal margin and pulse withstanding capability. Verify that board layout accommodates the component height (0.50mm for these models).

Q: What is the significance of height variation in 0805 packages?

A: 0805 (2012 Metric) packages have standard height specifications. Provided parts range from 0.50mm to 0.70mm maximum seated height. These variations are within IPC-A-610 tolerance for 0805 components and do not affect electrical performance or PCB assembly compatibility. Height becomes critical only in space-constrained applications (e.g., stacked components or confined cavities).

Q: Is moisture sensitivity a concern for these parts?

A: All listed parts have Moisture Sensitivity Level (MSL) 1, classified as Unlimited. This means no special moisture control measures are required during storage, handling, or assembly. Standard warehouse conditions are acceptable.

Q: Can I use YAGEO RC0805FR-0722R1L as a direct replacement?

A: Yes. YAGEO RC0805FR-0722R1L meets all critical electrical and mechanical parameters: 22.1 Ohms ±1%, 0.125W, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range. ROHS3 compliance matches the original specification. Height of 0.60mm is within standard 0805 tolerance.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape wound on reels, suitable for automated pick-and-place assembly. Cut Tape (CT) is supplied as individual tape segments, typically for manual assembly or small-quantity applications. Electrical and mechanical specifications are identical; selection depends on assembly process requirements and order quantity.

Q: Why is CRCW080522R1FKTA listed as RoHS non-compliant?

A: CRCW080522R1FKTA is marked as RoHS non-compliant and REACH affected. This part should be used only in legacy system maintenance or applications where original specification explicitly requires this part number. For new designs, use ROHS3-compliant alternatives such as CRCW080522R1FKEA or CRCW080522R1FKEAHP.

Q: Which substitute has the highest inventory availability?

A: RMCF0805FT22R1 (Stackpole Electronics Inc) has the highest inventory with 242,703 pcs in stock, followed by ERJ-6ENF22R1V (Panasonic Electronic Components) with 98,873 pcs. Both provide AEC-Q200 qualification and identical electrical specifications to the original part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message