Equivalent & Substitute Parts for RCS2012F2262CS

Part Overview

The RCS2012F2262CS is a 22.6 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The part features anti-sulfur and moisture-resistant construction, with a temperature coefficient of ±100ppm/°C. Currently in Active product status with 1084 pieces available in inventory, this resistor is suitable for general-purpose and industrial applications requiring stable resistance values with tight tolerance specifications.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating), mechanical compatibility (package type and dimensions), environmental ratings, and compliance certifications. Substitutes enable procurement flexibility, inventory optimization, and supply chain continuity.

Substiute Parts

RCS2012F2262CS

Samsung Electro-MechanicsIn Stock: 1103RCS2012F2262CS Datasheet

Current PartRFQ

CRCW080522K6FKEA

Vishay DaleIn Stock: 9373CRCW080522K6FKEA Datasheet

SimilarRFQ

ERJ-6ENF2262V

Panasonic Electronic ComponentsIn Stock: 51240ERJ-6ENF2262V Datasheet

SimilarRFQ

RC0805FR-0722K6L

YAGEOIn Stock: 68576RC0805FR-0722K6L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS2012F2262CS is determined by strict equivalence across the following critical parameters:

Electrical Equivalence: All substitute parts must match the resistance value of 22.6 kOhms with ±1% tolerance and 0.125W power rating. Temperature coefficient of ±100ppm/°C and operating temperature range of -55°C to 155°C are mandatory.

Mechanical Compatibility: All substitutes must use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two terminations to ensure direct PCB compatibility without layout modifications.

Composition & Construction: All substitutes are thick film resistors, maintaining the same construction methodology and performance characteristics as the original part.

Compliance & Certifications: All substitutes maintain ROHS3 compliance, REACH unaffected status, and Moisture Sensitivity Level 1 (Unlimited), ensuring regulatory and environmental compatibility.

The three identified substitutes (CRCW080522K6FKEA, ERJ-6ENF2262V, RC0805FR-0722K6L) meet all these criteria and are therefore direct functional equivalents.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the RCS2012F2262CS and are suitable for direct replacement in applications where the original part is specified.

CRCW080522K6FKEA (Vishay Dale): This substitute carries AEC-Q200 automotive qualification, indicating suitability for automotive and high-reliability applications. The seated height of 0.020" (0.50mm) is the lowest among all options, providing maximum clearance in space-constrained designs. With 9305 pieces in inventory, this part offers good availability for medium-volume procurement.

ERJ-6ENF2262V (Panasonic Electronic Components): This substitute also carries AEC-Q200 automotive qualification and represents the highest inventory availability at 51167 pieces. The seated height of 0.028" (0.70mm) is the maximum among the options. This part is optimal for high-volume production runs and applications requiring extended supply assurance.

RC0805FR-0722K6L (YAGEO): This substitute features moisture-resistant construction matching the original part's environmental protection. The seated height of 0.024" (0.60mm) provides a mid-range profile. With 68519 pieces in inventory, this part offers the highest stock level and is suitable for large-scale procurement and long-term supply continuity.

All substitutes maintain identical electrical performance, package compatibility, and regulatory compliance with the original RCS2012F2262CS. Selection among substitutes should be based on inventory availability, lead time requirements, and specific application qualifications (automotive vs. general-purpose).

Frequently Asked Questions (FAQ)

Q: Can CRCW080522K6FKEA replace RCS2012F2262CS directly on the PCB?

A: Yes. Both parts use the 0805 (2012 Metric) package with identical footprint dimensions (2.00mm x 1.25mm). The seated height difference (0.020" vs. 0.026") is within acceptable tolerance for standard PCB assembly processes and does not require layout modifications.

Q: What is the difference between the automotive-qualified substitutes and the original part?

A: CRCW080522K6FKEA and ERJ-6ENF2262V carry AEC-Q200 automotive qualification, indicating they meet additional reliability and testing requirements for automotive applications. The RCS2012F2262CS and RC0805FR-0722K6L do not carry this designation but remain fully compliant with ROHS3 and general industrial standards.

Q: Are all substitutes available in Tape & Reel packaging?

A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging, matching the original part's packaging format for automated assembly compatibility.

Q: Do the substitutes have the same temperature coefficient?

A: Yes. All substitute parts maintain a temperature coefficient of ±100ppm/°C, identical to the RCS2012F2262CS, ensuring equivalent performance across the full operating temperature range of -55°C to 155°C.

Q: Which substitute offers the best inventory availability?

A: RC0805FR-0722K6L (YAGEO) offers the highest inventory level at 68519 pieces, followed by ERJ-6ENF2262V (Panasonic) at 51167 pieces. Both provide excellent supply assurance for production requirements.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory compliance of the original RCS2012F2262CS.

Q: Can I mix different substitute parts in the same production batch?

A: Yes. All substitutes are electrically and mechanically equivalent. However, for consistency in manufacturing records and traceability, it is standard practice to use a single part number per production batch unless explicitly approved by design engineering.