RCS2012F222CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012F222CS is a 2.2 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating) and mechanical compatibility (package size, termination count, operating temperature range). Substitute parts may vary in specific features such as automotive qualification, packaging format, or enhanced pulse-withstanding capabilities while maintaining core functional equivalence.

Key Parameters

Parameter	Value
Resistance	2.2 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Operating Temperature Range	-55°C ~ 155°C
Temperature Coefficient	±100ppm/°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F222CS are grouped into two primary categories based on power rating and feature set:

Category 1: Direct Electrical Equivalents (0.125W, 1/8W, ±1% Tolerance)

These parts maintain identical electrical specifications and are suitable for direct replacement in applications where the original power rating and tolerance are required:

AC0805FR-072K2L (YAGEO)
CRCW08052K20FKEA (Vishay Dale)
CRCW08052K20FKTA (Vishay Dale)
ERJ-6ENF2201V (Panasonic Electronic Components)
ERJ-S06F2201V (Panasonic Electronic Components)
RC0805FR-072K2L (YAGEO)

Category 2: Enhanced Tolerance Alternative (0.125W, 1/8W, ±0.5% Tolerance)

This part offers tighter tolerance specification while maintaining all other electrical and mechanical parameters:

RC0805DR-072K2L (YAGEO)

Category 3: Higher Power Rating Alternatives (0.5W, 1/2W, ±1% Tolerance)

These parts provide increased power dissipation capability with pulse-withstanding features for applications requiring higher power handling:

CRCW08052K20FKEAHP (Vishay Dale)
ERJ-UP6F2201V (Panasonic Electronic Components)
RCS08052K20FKEA (Vishay Dale)

Substitution logic is based strictly on the following parameters: resistance value (2.2 kOhms), tolerance (±1% or tighter), package size (0805), operating temperature range (-55°C ~ 155°C), and composition (thick film). All substitute parts maintain the same physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two-termination configuration.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Composition	Temp Coeff	Operating Temp	Height Max	RoHS Status	MSL	Packaging Format
RCS2012F222CS	Samsung Electro-Mechanics	2.2 kOhms	±1%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.66mm	ROHS3	1	Tape & Reel
AC0805FR-072K2L	YAGEO	2.2 kOhms	±1%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.60mm	ROHS3	1	Tape & Reel
CRCW08052K20FKEA	Vishay Dale	2.2 kOhms	±1%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.50mm	ROHS3	1	Cut Tape & Digi-Reel
CRCW08052K20FKEAHP	Vishay Dale	2.2 kOhms	±1%	0.5W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.50mm	ROHS3	1	Tape & Reel
CRCW08052K20FKTA	Vishay Dale	2.2 kOhms	±1%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.50mm	RoHS non-compliant	1	Tape & Reel
ERJ-6ENF2201V	Panasonic Electronic Components	2.2 kOhms	±1%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.70mm	ROHS3	1	Cut Tape & Digi-Reel
ERJ-S06F2201V	Panasonic Electronic Components	2.2 kOhms	±1%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.70mm	ROHS3	1	Tape & Reel
ERJ-UP6F2201V	Panasonic Electronic Components	2.2 kOhms	±1%	0.5W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.70mm	ROHS3	1	Tape & Reel
RC0805DR-072K2L	YAGEO	2.2 kOhms	±0.5%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.60mm	ROHS3	1	Tape & Reel
RC0805FR-072K2L	YAGEO	2.2 kOhms	±1%	0.125W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.60mm	ROHS3	1	Cut Tape & Digi-Reel
RCS08052K20FKEA	Vishay Dale	2.2 kOhms	±1%	0.5W	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.50mm	ROHS3	1	Tape & Reel

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications)

Parts AC0805FR-072K2L, CRCW08052K20FKEA, ERJ-6ENF2201V, ERJ-S06F2201V, and RC0805FR-072K2L are suitable for direct substitution where the original 0.125W power rating and ±1% tolerance are required. All these alternatives are ROHS3 compliant with MSL 1 rating, matching the compliance profile of the RCS2012F222CS.

For Enhanced Tolerance Applications

RC0805DR-072K2L provides ±0.5% tolerance specification, offering improved accuracy compared to the ±1% tolerance of the original part. This alternative is appropriate for applications requiring tighter resistance tolerance while maintaining all other electrical and mechanical parameters.

For Higher Power Dissipation Requirements

CRCW08052K20FKEAHP, ERJ-UP6F2201V, and RCS08052K20FKEA are rated at 0.5W (1/2W) power dissipation with pulse-withstanding capability. These parts are suitable for applications where the original 0.125W rating is insufficient. All three maintain ROHS3 compliance and MSL 1 rating.

Compliance Considerations

CRCW08052K20FKTA is RoHS non-compliant and REACH affected, making it unsuitable for applications requiring ROHS3 compliance. This part should not be selected for new designs or applications with regulatory compliance requirements.

Packaging Format Selection

The RCS2012F222CS is supplied in Tape & Reel format. Equivalent parts maintaining this packaging format include AC0805FR-072K2L, CRCW08052K20FKEAHP, CRCW08052K20FKTA, ERJ-S06F2201V, ERJ-UP6F2201V, RC0805DR-072K2L, and RCS08052K20FKEA. Parts supplied in Cut Tape & Digi-Reel format (CRCW08052K20FKEA, ERJ-6ENF2201V, RC0805FR-072K2L) require different handling and reel specifications.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.5W rated resistor as a substitute for the 0.125W RCS2012F222CS?

A: Yes. A higher power-rated resistor (0.5W) can be used in place of a 0.125W resistor in the same package size. The 0.5W alternatives (CRCW08052K20FKEAHP, ERJ-UP6F2201V, RCS08052K20FKEA) maintain identical resistance value, tolerance, and operating temperature range. The increased power rating provides additional thermal margin and does not negatively affect circuit performance.

Q: What is the difference between ±1% and ±0.5% tolerance?

A: Tolerance specifies the maximum deviation of the actual resistance value from the nominal value. A ±1% tolerance part (RCS2012F222CS) can vary between 2.178 kOhms and 2.222 kOhms. A ±0.5% tolerance part (RC0805DR-072K2L) can vary between 2.189 kOhms and 2.211 kOhms. The ±0.5% specification provides tighter control and is suitable for precision applications requiring more accurate resistance values.

Q: Are all substitute parts ROHS3 compliant?

A: No. CRCW08052K20FKTA is RoHS non-compliant. All other listed substitutes (AC0805FR-072K2L, CRCW08052K20FKEA, CRCW08052K20FKEAHP, ERJ-6ENF2201V, ERJ-S06F2201V, ERJ-UP6F2201V, RC0805DR-072K2L, RC0805FR-072K2L, RCS08052K20FKEA) are ROHS3 compliant, matching the compliance status of the original RCS2012F222CS.

Q: What is the significance of the 0805 package designation?

A: The 0805 designation (2012 Metric) refers to the physical dimensions of the chip resistor: 0.079" length × 0.049" width (2.00mm × 1.25mm). All listed substitute parts use the same 0805 package, ensuring mechanical compatibility with PCB footprints designed for the RCS2012F222CS. Height variations exist among substitutes (ranging from 0.50mm to 0.70mm maximum seated height) but remain within acceptable PCB assembly tolerances.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the lowest moisture sensitivity level. Components with MSL 1 rating do not require special moisture control during storage, handling, or assembly. All listed substitute parts carry MSL 1 rating, matching the moisture handling requirements of the original part.

Q: Can I substitute a Tape & Reel packaged part with a Cut Tape & Digi-Reel packaged part?

A: Electrically and mechanically, yes. However, packaging format affects procurement, storage, and assembly processes. The RCS2012F222CS is supplied in Tape & Reel format. Substitutes in Cut Tape & Digi-Reel format (CRCW08052K20FKEA, ERJ-6ENF2201V, RC0805FR-072K2L) require different reel specifications and handling procedures. Verify compatibility with your assembly equipment and supply chain requirements before substitution.

Q: What is the temperature coefficient specification?

A: The temperature coefficient (±100ppm/°C) specifies how the resistance value changes with temperature. All listed parts maintain the same ±100ppm/°C specification, ensuring consistent performance across the operating temperature range of -55°C to 155°C. This parameter is identical across all substitutes and the original part.

Q: Are automotive-qualified parts (AEC-Q200) required for this application?

A: Automotive qualification (AEC-Q200) is not a requirement for the RCS2012F222CS itself. However, several substitute parts carry AEC-Q200 certification (AC0805FR-072K2L, CRCW08052K20FKEA, CRCW08052K20FKEAHP, CRCW08052K20FKTA, ERJ-6ENF2201V, ERJ-S06F2201V, ERJ-UP6F2201V, RCS08052K20FKEA). AEC-Q200 qualification is beneficial for automotive applications but not necessary for general industrial or consumer electronics use.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message