RCS2012F221CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012F221CS is a 220 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in the 0805 (2012 Metric) package. This component features anti-sulfur and moisture-resistant properties, with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries an active product status. Equivalent and substitute parts are identified based on matching or exceeding electrical specifications, mechanical compatibility, and environmental ratings within the 0805 package form factor.

Key Parameters

Parameter	Value
Resistance	220 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F221CS are classified into two primary groups based on electrical and mechanical compatibility:

Group 1: Direct Equivalents (0.125W, 1/8W Rating) Parts in this group maintain identical power ratings, resistance values, tolerance, and package dimensions. These substitutes are interchangeable in applications where the original 1/8W specification is required. Electrical performance and thermal characteristics remain consistent with the main part.

Group 2: Higher Power Rating Substitutes (0.5W, 1/2W or 0.4W, 2/5W Rating) Parts in this group provide increased power dissipation capability while maintaining the same 0805 package footprint, resistance value, and tolerance. These substitutes are suitable for applications requiring enhanced thermal performance or pulse withstanding capability. The increased power rating does not compromise compatibility with 1/8W-rated circuit designs.

Key Parameters Determining Substitution:

Resistance value: 220 Ohms (exact match required)
Tolerance: ±1% (minimum requirement)
Package: 0805 (2012 Metric) (exact match required)
Temperature Coefficient: ±100ppm/°C (standard for all listed parts)
Operating Temperature: -55°C to 155°C (minimum requirement)
Composition: Thick Film (standard for all listed parts)
MSL Rating: 1 (Unlimited) (standard for all listed parts)
RoHS Compliance: ROHS3 (required)

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temperature Coefficient	Operating Temperature	Height - Seated (Max)	Features	RoHS Status
RCS2012F221CS	Samsung Electro-Mechanics	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	0.66mm	Anti-Sulfur, Moisture Resistant	ROHS3
RC0805FR-07220RL	YAGEO	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	0.60mm	Moisture Resistant	ROHS3
AC0805FR-07220RL	YAGEO	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	0.60mm	Automotive AEC-Q200, Moisture Resistant	ROHS3
CRCW0805220RFKEA	Vishay Dale	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	0.50mm	Automotive AEC-Q200	ROHS3
ERJ-6ENF2200V	Panasonic Electronic Components	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	0.70mm	Automotive AEC-Q200	ROHS3
RMCF0805FT220R	Stackpole Electronics Inc	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	0.65mm	Automotive AEC-Q200	ROHS3
CRCW0805220RFKEAHP	Vishay Dale	220 Ohms	±1%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	0.50mm	Automotive AEC-Q200, Pulse Withstanding	ROHS3
ERJ-P06D2200V	Panasonic Electronic Components	220 Ohms	±0.5%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	0.70mm	Automotive AEC-Q200, Pulse Withstanding	ROHS3
ERJ-UP6F2200V	Panasonic Electronic Components	220 Ohms	±1%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	0.70mm	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	ROHS3
ESR10EZPF2200	Rohm Semiconductor	220 Ohms	±1%	0.4W	0805	±100ppm/°C	-55°C ~ 155°C	0.65mm	Automotive AEC-Q200, Pulse Withstanding	ROHS3
RCS0805220RFKEA	Vishay Dale	220 Ohms	±1%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	0.50mm	Automotive AEC-Q200, Pulse Withstanding	ROHS3

Engineering Selection Recommendations

For Direct Replacement (0.125W Applications): The following parts provide equivalent electrical and mechanical performance to the RCS2012F221CS:

RC0805FR-07220RL (YAGEO) maintains identical power rating and tolerance with reduced seated height
AC0805FR-07220RL (YAGEO) adds automotive AEC-Q200 qualification
CRCW0805220RFKEA (Vishay Dale) provides automotive AEC-Q200 qualification with minimal seated height
ERJ-6ENF2200V (Panasonic) offers automotive AEC-Q200 qualification
RMCF0805FT220R (Stackpole Electronics Inc) includes automotive AEC-Q200 qualification

All direct replacement options maintain ROHS3 compliance, MSL 1 rating, and -55°C to 155°C operating temperature range.

For Enhanced Thermal Performance (0.5W or 0.4W Applications): Higher power-rated substitutes are suitable when circuit design permits increased power dissipation:

CRCW0805220RFKEAHP (Vishay Dale) provides 0.5W rating with pulse withstanding capability
ERJ-P06D2200V (Panasonic) offers 0.5W rating with ±0.5% tolerance and pulse withstanding
ERJ-UP6F2200V (Panasonic) combines 0.5W rating with anti-sulfur protection and pulse withstanding
ESR10EZPF2200 (Rohm Semiconductor) delivers 0.4W rating with pulse withstanding capability
RCS0805220RFKEA (Vishay Dale) provides 0.5W rating with pulse withstanding capability

All higher power-rated options maintain the 0805 package footprint, enabling direct PCB compatibility while providing enhanced thermal margin.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.5W rated resistor in place of the 0.125W RCS2012F221CS? A: Yes. Higher power-rated resistors are electrically compatible in circuits designed for 0.125W components. The increased power rating provides additional thermal margin without affecting circuit operation. The 0805 package footprint remains identical, ensuring PCB compatibility.

Q: What is the difference between parts with and without AEC-Q200 qualification? A: AEC-Q200 qualification indicates automotive-grade reliability testing and qualification. Parts with this rating meet automotive industry standards for component reliability. Non-AEC-Q200 parts are suitable for general industrial and consumer applications. Selection depends on application requirements.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts carry ROHS3 compliance status, matching the environmental compliance of the main part RCS2012F221CS.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity? A: MSL 1 indicates the lowest moisture sensitivity level. Components with this rating require no special moisture control during storage, handling, or assembly. All listed parts maintain MSL 1 rating.

Q: How do tolerance differences affect part selection? A: The RCS2012F221CS specifies ±1% tolerance. Most substitute parts match this tolerance. ERJ-P06D2200V offers tighter ±0.5% tolerance, which is compatible for applications requiring higher precision. Tighter tolerance does not create incompatibility with ±1% circuit designs.

Q: What is the significance of anti-sulfur and pulse withstanding features? A: Anti-sulfur protection extends component life in environments with sulfur-containing contaminants. Pulse withstanding capability allows the resistor to handle transient overvoltage events. These features are optional enhancements; their presence does not affect basic substitution compatibility.

Q: Do seated height differences affect PCB assembly? A: Seated height variations (0.50mm to 0.70mm) are within standard 0805 package tolerances. These minor differences do not affect PCB assembly, reflow soldering, or component placement. All listed parts are mechanically compatible with standard 0805 footprints.

Q: Can I substitute parts from different manufacturers? A: Yes. All listed substitute parts meet identical electrical specifications (220 Ohms, ±1% tolerance, 0.125W minimum), operate within the same temperature range (-55°C to 155°C), and use the same 0805 package. Cross-manufacturer substitution is supported by matching electrical and mechanical parameters.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message