RCS2012F1960CS Equivalent & Substitute Parts

Part Overview

The RCS2012F1960CS is a 196 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in a 0805 (2012 Metric) surface mount package. This component is classified as Active product status and features anti-sulfur and moisture-resistant construction. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without functional degradation.

Substiute Parts

RCS2012F1960CS

Samsung Electro-MechanicsIn Stock: 966RCS2012F1960CS Datasheet

Current PartRFQ

CRCW0805196RFKEA

Vishay DaleIn Stock: 14913CRCW0805196RFKEA Datasheet

SimilarRFQ

ERJ-6ENF1960V

Panasonic Electronic ComponentsIn Stock: 46381ERJ-6ENF1960V Datasheet

SimilarRFQ

RC0805FR-07196RL

YAGEOIn Stock: 35783RC0805FR-07196RL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F1960CS are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 196 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance Parameters (Must Match):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Packaging: Tape & Reel (TR)

All three substitute parts meet these criteria. Variations in height (seated maximum) and specific feature sets (automotive AEC-Q200 certification or anti-sulfur properties) do not prevent substitution when all primary electrical, mechanical, and compliance parameters align.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the RCS2012F1960CS based on electrical and mechanical specifications. Selection among these alternatives depends on application-specific requirements:

CRCW0805196RFKEA (Vishay Dale): This substitute includes Automotive AEC-Q200 certification, suitable for applications requiring automotive-grade reliability standards. The seated height of 0.020" (0.50mm) is the lowest among all options, beneficial for space-constrained PCB layouts.

ERJ-6ENF1960V (Panasonic): This substitute includes Automotive AEC-Q200 certification and offers the highest inventory availability (46,299 pieces). The seated height of 0.028" (0.70mm) is the maximum among all options and should be verified against PCB clearance requirements.

RC0805FR-07196RL (YAGEO): This substitute features moisture-resistant construction similar to the original RCS2012F1960CS and offers high inventory availability (35,746 pieces). The seated height of 0.024" (0.60mm) provides a mid-range profile suitable for standard PCB applications.

All parts maintain ROHS3 compliance, MSL Level 1 rating, and identical electrical performance across the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805196RFKEA replace RCS2012F1960CS in any application?

A: Yes. Both parts share identical electrical specifications (196 Ohms ±1%, 0.125W), mechanical dimensions (0805 package, 2.00mm x 1.25mm), and compliance certifications (ROHS3, MSL 1). The CRCW0805196RFKEA includes additional Automotive AEC-Q200 certification, which does not restrict its use in non-automotive applications.

Q: What is the significance of the height difference between substitute parts?

A: The seated height varies between 0.020" (0.50mm) for CRCW0805196RFKEA, 0.024" (0.60mm) for RC0805FR-07196RL, and 0.028" (0.70mm) for ERJ-6ENF1960V. These differences are within the 0805 package specification and do not affect electrical performance. Height selection depends on PCB design constraints and available clearance above the component.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All substitute parts listed are supplied in Tape & Reel (TR) packaging, matching the original RCS2012F1960CS packaging format for automated assembly compatibility.

Q: Does the anti-sulfur feature of RCS2012F1960CS affect substitution compatibility?

A: No. The anti-sulfur feature is an additional environmental protection characteristic of the original part. Substitute parts without this specific feature remain electrically and mechanically compatible. Selection of anti-sulfur variants depends on application environment requirements, not substitution eligibility.

Q: Can ERJ-6ENF1960V be used in applications originally designed for RCS2012F1960CS?

A: Yes. ERJ-6ENF1960V meets all electrical, mechanical, and compliance requirements for direct substitution. The Automotive AEC-Q200 certification indicates enhanced reliability testing and is compatible with both automotive and general industrial applications.

Q: What is the impact of tolerance specification on part selection?

A: All substitute parts maintain ±1% tolerance, identical to the original RCS2012F1960CS. This ensures equivalent circuit performance and signal accuracy across all qualified alternatives.