RCS2012F18R2CS Equivalent & Substitute Parts

Part Overview

The RCS2012F18R2CS is an 18.2 Ohm ±1% 1/8W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is designed for general-purpose applications requiring precision resistive elements with anti-sulfur and moisture-resistant properties. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and package compatibility are maintained across alternative manufacturers.

Substiute Parts

RCS2012F18R2CS

Samsung Electro-MechanicsIn Stock: 923RCS2012F18R2CS Datasheet

Current PartRFQ

CRCW080518R2FKEA

Vishay DaleIn Stock: 41353CRCW080518R2FKEA Datasheet

SimilarRFQ

ERJ-6ENF18R2V

Panasonic Electronic ComponentsIn Stock: 52289ERJ-6ENF18R2V Datasheet

SimilarRFQ

ESR10EZPF18R2

Rohm SemiconductorIn Stock: 1783ESR10EZPF18R2 Datasheet

SimilarRFQ

RC0805FR-0718R2L

YAGEOIn Stock: 10491RC0805FR-0718R2L Datasheet

SimilarRFQ

RMCF0805FT18R2

Stackpole Electronics IncIn Stock: 79467RMCF0805FT18R2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

• Resistance value: 18.2 Ohms
• Tolerance: ±1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100 ppm/°C
• Operating Temperature Range: -55°C to 155°C
• Number of Terminations: 2
• RoHS3 Compliance: Required
• MSL Rating: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) or higher are acceptable
• Height - Seated (Max): Variation within 0.026" ± 0.004" (0.66mm ± 0.10mm) is acceptable for PCB assembly compatibility
• Manufacturer-specific features (AEC-Q200, pulse withstanding, anti-sulfur, moisture resistant) do not disqualify substitution but represent additional capabilities

All identified substitute parts meet or exceed the mandatory equivalence criteria.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical equivalence to the RCS2012F18R2CS. Selection among substitutes is based on the following factors:

Direct Equivalents (Identical Power Rating):

• CRCW080518R2FKEA (Vishay Dale): Automotive AEC-Q200 rated, lowest seated height (0.50mm), highest inventory availability (41,279 pcs)
• ERJ-6ENF18R2V (Panasonic Electronic Components): Automotive AEC-Q200 rated, highest seated height (0.70mm), high inventory availability (52,184 pcs)
• RC0805FR-0718R2L (YAGEO): Moisture resistant, mid-range seated height (0.60mm), moderate inventory availability (10,445 pcs)
• RMCF0805FT18R2 (Stackpole Electronics Inc): Automotive AEC-Q200 rated, mid-range seated height (0.65mm), highest inventory availability (79,383 pcs)

Enhanced Power Rating:

• ESR10EZPF18R2 (Rohm Semiconductor): Automotive AEC-Q200 rated with pulse withstanding capability, 0.4W power rating (3.2× higher than primary part), suitable for applications requiring additional thermal margin, moderate inventory availability (1,684 pcs)

All substitute parts carry Active product status and full RoHS3 compliance with unlimited MSL rating, ensuring compatibility with standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can CRCW080518R2FKEA replace RCS2012F18R2CS in any application?

A: Yes. CRCW080518R2FKEA meets all mandatory equivalence criteria: identical 18.2 Ohm resistance, ±1% tolerance, 0.125W power rating, 0805 package, ±100 ppm/°C temperature coefficient, -55°C to 155°C operating range, and RoHS3 compliance. The 0.16mm reduction in seated height (0.50mm vs 0.66mm) is within acceptable PCB assembly tolerances.

Q: What is the difference between the ESR10EZPF18R2 and other substitutes?

A: ESR10EZPF18R2 is rated at 0.4W (2/5W) compared to 0.125W (1/8W) for other substitutes. This higher power rating provides increased thermal capacity and pulse withstanding capability. All other electrical parameters remain equivalent. Use ESR10EZPF18R2 when circuit design requires higher power dissipation margin or pulse current handling.

Q: Are all substitutes suitable for automotive applications?

A: CRCW080518R2FKEA, ERJ-6ENF18R2V, ESR10EZPF18R2, and RMCF0805FT18R2 carry Automotive AEC-Q200 certification. RC0805FR-0718R2L and RCS2012F18R2CS do not list AEC-Q200 rating. For automotive applications, select from the AEC-Q200 qualified parts.

Q: Does seated height variation affect PCB assembly compatibility?

A: Seated height variation among substitutes ranges from 0.50mm to 0.70mm (0.020" to 0.028"). This 0.20mm range is within standard PCB assembly process tolerances for 0805 components. Height differences do not affect electrical performance or reflow soldering compatibility.

Q: Can I use these substitutes interchangeably in existing designs?

A: Yes, for applications where the original RCS2012F18R2CS specifications are met. All substitutes maintain identical resistance, tolerance, temperature coefficient, operating range, and package dimensions. Verify that your PCB design does not impose specific height constraints that would exclude parts with maximum seated heights above 0.70mm.

Q: What inventory considerations should guide substitute selection?

A: RMCF0805FT18R2 offers the highest inventory (79,383 pcs), followed by ERJ-6ENF18R2V (52,184 pcs) and CRCW080518R2FKEA (41,279 pcs). For high-volume production, these three options provide supply security. ESR10EZPF18R2 has lower inventory (1,684 pcs) and should be selected only when its enhanced power rating is required.

Q: Are moisture sensitivity levels identical across all substitutes?

A: Yes. All parts, including RCS2012F18R2CS and all substitutes, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard dry storage and handling practices apply uniformly across all options.