RCS2012F1692CS Equivalent & Substitute Parts

Part Overview

The RCS2012F1692CS is a 16.9 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This thick film resistor features anti-sulfur and moisture-resistant properties, operating across -55°C to 155°C with a temperature coefficient of ±100ppm/°C. The part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to ensure direct circuit board replacement capability.

Substiute Parts

RCS2012F1692CS

Samsung Electro-MechanicsIn Stock: 1171RCS2012F1692CS Datasheet

Current PartRFQ

AC0805FR-0716K9L

YAGEOIn Stock: 667AC0805FR-0716K9L Datasheet

SimilarRFQ

CRCW080516K9FKEA

Vishay DaleIn Stock: 35863CRCW080516K9FKEA Datasheet

SimilarRFQ

ERJ-6ENF1692V

Panasonic Electronic ComponentsIn Stock: 77687ERJ-6ENF1692V Datasheet

SimilarRFQ

RC0805FR-0716K9L

YAGEOIn Stock: 120023RC0805FR-0716K9L Datasheet

SimilarRFQ

RMCF0805FT16K9

Stackpole Electronics IncIn Stock: 28753RMCF0805FT16K9 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F1692CS are qualified based on the following criteria:

Electrical Parameters (Critical):

• Resistance value: 16.9 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Critical):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance Parameters:

• RoHS3 compliance
• Moisture Sensitivity Level 1
• REACH Unaffected status

All identified substitute parts match these core parameters, enabling direct replacement in circuit applications without design modification.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts are Active status products with ROHS3 compliance and MSL Level 1 rating, matching the primary specifications of RCS2012F1692CS.

For Automotive Applications: AC0805FR-0716K9L, CRCW080516K9FKEA, ERJ-6ENF1692V, and RMCF0805FT16K9 carry AEC-Q200 automotive qualification. These parts are suitable for automotive-grade circuit designs requiring enhanced reliability standards.

For General Industrial Applications: RC0805FR-0716K9L provides equivalent electrical and thermal performance without automotive certification. This part is available in Cut Tape and Digi-Reel packaging, offering flexibility in procurement formats.

Height Considerations: Physical height varies between 0.50mm and 0.70mm across substitute options. CRCW080516K9FKEA offers the lowest profile (0.50mm), while ERJ-6ENF1692V has the highest (0.70mm). Height selection depends on PCB layout constraints and assembly clearance requirements.

Packaging Format: Most substitutes are supplied in Tape & Reel format. RC0805FR-0716K9L is available in Cut Tape & Digi-Reel, providing alternative procurement options for lower-volume applications.

Frequently Asked Questions (FAQ)

Q: Can RCS2012F1692CS be directly replaced with any of these substitute parts?

A: Yes. All substitute parts match the critical electrical parameters (16.9 kΩ, ±1%, 0.125W), mechanical dimensions (0805 package, 2.00mm x 1.25mm), and compliance requirements (ROHS3, MSL Level 1). Direct PCB replacement is possible without circuit design modification.

Q: What is the difference between automotive-qualified and non-automotive parts?

A: AC0805FR-0716K9L, CRCW080516K9FKEA, ERJ-6ENF1692V, and RMCF0805FT16K9 carry AEC-Q200 certification, indicating compliance with automotive reliability and testing standards. RCS2012F1692CS and RC0805FR-0716K9L do not carry this certification. Automotive applications requiring AEC-Q200 compliance must use qualified parts.

Q: Does height variation affect PCB assembly?

A: Height differences range from 0.50mm to 0.70mm. For standard PCB assembly processes, these variations are within typical component tolerance ranges. However, applications with strict height constraints or high-density layouts should verify clearance with specific part selections.

Q: Are there packaging format differences?

A: Most substitutes are supplied in Tape & Reel format. RC0805FR-0716K9L is available in Cut Tape & Digi-Reel packaging. Tape & Reel format is standard for automated assembly; Cut Tape format is suitable for manual or lower-volume applications.

Q: What is the temperature coefficient significance?

A: All parts share ±100ppm/°C temperature coefficient and -55°C to 155°C operating range. This ensures consistent resistance stability across the full operating temperature spectrum, maintaining circuit performance in thermal extremes.

Q: Are all parts ROHS3 compliant?

A: Yes. All listed parts, including the primary RCS2012F1692CS, are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for electronics manufacturing.