RCS2012F163CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012F163CS is a 16 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and packaging compatibility to ensure direct board-level interchangeability.

Substiute Parts

RCS2012F163CS

Samsung Electro-MechanicsIn Stock: 1085RCS2012F163CS Datasheet

Current PartRFQ

RC2012F163CS

Samsung Electro-MechanicsIn Stock: 1370RC2012F163CS Datasheet

SimilarRFQ

AC0805FR-0716KL

YAGEOIn Stock: 11168AC0805FR-0716KL Datasheet

SimilarRFQ

CRCW080516K0FKEA

Vishay DaleIn Stock: 10158CRCW080516K0FKEA Datasheet

SimilarRFQ

CRCW080516K0FKEAHP

Vishay DaleIn Stock: 54022CRCW080516K0FKEAHP Datasheet

SimilarRFQ

ERJ-6ENF1602V

Panasonic Electronic ComponentsIn Stock: 96352ERJ-6ENF1602V Datasheet

SimilarRFQ

RC0805FR-0716KL

YAGEOIn Stock: 233051RC0805FR-0716KL Datasheet

SimilarRFQ

RCS080516K0FKEA

Vishay DaleIn Stock: 7708RCS080516K0FKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Primary Matching Criteria:

• Resistance value: 16 kOhms
• Tolerance: ±1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Secondary Consideration:

• Power Rating: Parts rated at 0.125W (1/8W) are direct equivalents. Parts rated at 0.5W (1/2W) are functionally compatible but represent higher power capability and may differ in physical height.

All substitute parts listed meet or exceed the primary matching criteria. Packaging format (Tape & Reel vs. Cut Tape) does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (0.125W Power Rating): RC2012F163CS, AC0805FR-0716KL, CRCW080516K0FKEA, ERJ-6ENF1602V, and RC0805FR-0716KL are electrically and mechanically equivalent to RCS2012F163CS. All maintain identical resistance, tolerance, temperature coefficient, and operating temperature specifications. Selection among these parts may be based on packaging format preference (Tape & Reel vs. Cut Tape) and inventory availability.

Higher Power Rating Alternatives (0.5W Power Rating): CRCW080516K0FKEAHP and RCS080516K0FKEA are rated at 0.5W (1/2W) instead of 0.125W (1/8W). These parts are functionally compatible for applications where the original 0.125W specification is not a limiting constraint. Both parts maintain identical resistance, tolerance, and temperature characteristics. Physical height is reduced to 0.50mm maximum.

Compliance Considerations: All substitute parts carry ROHS3 compliance and Moisture Sensitivity Level 1 (Unlimited), matching the original part. Parts designated with AEC-Q200 rating (AC0805FR-0716KL, CRCW080516K0FKEA, CRCW080516K0FKEAHP, ERJ-6ENF1602V, RCS080516K0FKEA) include automotive qualification and are suitable for automotive and industrial applications requiring enhanced reliability standards.

Frequently Asked Questions (FAQ)

Q: Can RC2012F163CS be used as a direct replacement for RCS2012F163CS?

A: Yes. RC2012F163CS is a direct electrical and mechanical equivalent. Both parts are manufactured by Samsung Electro-Mechanics with identical resistance (16 kOhms), tolerance (±1%), power rating (0.125W), package (0805), and operating specifications. The primary difference is packaging format: RC2012F163CS is supplied in Cut Tape while RCS2012F163CS is supplied in Tape & Reel.

Q: What is the difference between 0.125W and 0.5W rated parts?

A: Power rating indicates the maximum continuous power dissipation the resistor can handle. A 0.5W part can dissipate four times more power than a 0.125W part while maintaining the same physical package size. If your circuit dissipates less than 0.125W across the resistor, both ratings are functionally equivalent. Use 0.5W parts only if higher power dissipation capability is required or if 0.125W parts are unavailable.

Q: Are AEC-Q200 rated parts compatible with non-automotive applications?

A: Yes. AEC-Q200 is an automotive qualification standard that includes enhanced reliability testing and stricter quality requirements. Parts meeting AEC-Q200 (AC0805FR-0716KL, CRCW080516K0FKEA, ERJ-6ENF1602V, RCS080516K0FKEA) are fully compatible with general industrial and consumer applications and offer superior reliability margins.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly processes. Electrical and mechanical specifications remain identical. Tape & Reel packaging is optimized for automated assembly; Cut Tape is suitable for manual assembly or lower-volume applications.

Q: What is Moisture Sensitivity Level (MSL) 1?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. The component can be stored and handled under standard conditions without special moisture control measures. All listed substitute parts carry MSL 1 rating.

Q: Can I substitute a part with different physical height?

A: Physical height differences (ranging from 0.50mm to 0.70mm maximum) do not affect electrical function. Height variations may be relevant only for applications with strict mechanical clearance constraints or automated assembly equipment with fixed component height tolerances. Verify clearance requirements in your specific application.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification, matching the original RCS2012F163CS specification.