RCS2012F160CS

Part Overview

The RCS2012F160CS is a 16 Ohm thick film chip resistor manufactured by Samsung Electro-Mechanics in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with ±1% tolerance and offers anti-sulfur and moisture-resistant characteristics. The part maintains Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, package geometry, and compliance certifications to support design flexibility and supply chain optimization.

Substiute Parts

RCS2012F160CS

Samsung Electro-MechanicsIn Stock: 830RCS2012F160CS Datasheet

Current PartRFQ

AC0805FR-0716RL

YAGEOIn Stock: 51040AC0805FR-0716RL Datasheet

SimilarRFQ

CRCW080516R0FKEA

Vishay DaleIn Stock: 5469CRCW080516R0FKEA Datasheet

SimilarRFQ

ERJ-6ENF16R0V

Panasonic Electronic ComponentsIn Stock: 20634ERJ-6ENF16R0V Datasheet

SimilarRFQ

ESR10EZPF16R0

Rohm SemiconductorIn Stock: 185406ESR10EZPF16R0 Datasheet

SimilarRFQ

RC0805FR-0716RL

YAGEOIn Stock: 87322RC0805FR-0716RL Datasheet

SimilarRFQ

RMCF0805FT16R0

Stackpole Electronics IncIn Stock: 7085RMCF0805FT16R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F160CS are qualified based on exact matching of the following electrical and mechanical parameters:

• Resistance Value: 16 Ohms
• Tolerance: ±1%
• Power Rating: 0.125W (1/8W) minimum
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C to 155°C
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these core specifications. Additional features such as automotive AEC-Q200 certification are noted where applicable but do not disqualify parts lacking such designations. The ESR10EZPF16R0 variant features enhanced power rating (0.4W) and pulse withstanding capability, making it suitable for applications requiring higher power dissipation margins while maintaining electrical equivalence at rated operating conditions.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and ROHS3 compliance, confirming their suitability for current procurement and long-term design stability.

Functionally Equivalent Substitutes (Direct Replacement): AC0805FR-0716RL, CRCW080516R0FKEA, ERJ-6ENF16R0V, RC0805FR-0716RL, and RMCF0805FT16R0 are direct electrical and mechanical equivalents to the RCS2012F160CS. These parts share identical resistance, tolerance, power rating, and operating characteristics. Four of these variants include automotive AEC-Q200 certification, indicating qualification for automotive applications with extended reliability assessment. RC0805FR-0716RL is supplied in Cut Tape and Digi-Reel® packaging as an alternative to standard Tape & Reel format.

Enhanced Power Rating Option: ESR10EZPF16R0 provides a higher power rating of 0.4W with pulse withstanding capability while maintaining all other electrical specifications. This variant is suitable for applications requiring increased thermal headroom or transient power handling without design modification. Automotive AEC-Q200 rating applies to this variant.

Frequently Asked Questions (FAQ)

Q: Can AC0805FR-0716RL replace RCS2012F160CS directly in my design? A: Yes. AC0805FR-0716RL meets all electrical specifications (16 Ω, ±1%, 0.125W) and package requirements (0805). Height difference (0.60mm vs. 0.66mm) is within typical board assembly tolerances. The addition of automotive AEC-Q200 certification makes it suitable for general and automotive applications.

Q: What is the difference between the ESR10EZPF16R0 and other substitutes? A: ESR10EZPF16R0 is rated for 0.4W power dissipation compared to 0.125W for all other parts listed. It also includes pulse withstanding capability. This higher rating provides a safety margin in high-transient environments while delivering the same 16 Ω resistance and ±1% tolerance. All other electrical and mechanical parameters remain equivalent.

Q: Does packaging format affect interchangeability? A: Electrical and thermal performance are unaffected by packaging format. RC0805FR-0716RL uses Cut Tape and Digi-Reel® format instead of standard Tape & Reel, making it suitable for alternative assembly processes. Physical dimensions and component specifications remain identical to Tape & Reel variants.

Q: Are the automotive-rated parts necessary for non-automotive applications? A: Automotive AEC-Q200 certification indicates extended reliability testing and qualification for automotive environments but does not restrict use in other applications. Parts with this certification (AC0805FR-0716RL, CRCW080516R0FKEA, ERJ-6ENF16R0V, RMCF0805FT16R0) may be selected based on availability or supply chain preferences without application constraints.

Q: What are the height differences and their significance? A: Maximum seated heights vary between 0.50mm and 0.70mm. These variations are typical for thick film 0805 resistors across manufacturers and fall within standard PCB assembly clearances. Height differences do not affect electrical performance or standard reflow assembly processes.

Q: Why would I choose one manufacturer over another? A: Selection criteria include part availability, lead time, cost, supply chain stability, and specific feature requirements. All listed parts are Active status with unlimited MSL (1), indicating wide availability and no special moisture handling requirements. Automotive-rated variants may be preferred for applications requiring formal qualification documentation.