RCS2012F154CS 150kΩ 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RCS2012F154CS is a 150 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1) and operates across -55°C to 155°C temperature range.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating) and mechanical compatibility (package size, termination count, physical dimensions). Substitute parts may vary in manufacturer features, certifications, and packaging format while maintaining functional equivalence within the specified parameter constraints.

Key Parameters

Parameter	Value	Unit
Resistance	150	kOhms
Tolerance	±1	%
Power Rating	0.125	W (1/8W)
Package / Case	0805 (2012 Metric)	—
Composition	Thick Film	—
Temperature Coefficient	±100	ppm/°C
Operating Temperature Range	-55 to 155	°C
Number of Terminations	2	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution logic for the RCS2012F154CS is based on the following mandatory electrical and mechanical parameters:

Primary Matching Criteria:

Resistance value: 150 kOhms
Tolerance: ±1%
Package: 0805 (2012 Metric)
Composition: Thick Film
Number of Terminations: 2
Temperature Coefficient: ±100 ppm/°C
Operating Temperature Range: -55°C to 155°C

Secondary Compatibility Factors:

Power rating (0.125W minimum required; higher ratings acceptable)
Physical dimensions (0.079" L × 0.049" W; height variations within 0.026" to 0.028" maximum)
Packaging format (Tape & Reel or Cut Tape acceptable)
RoHS and REACH compliance status
Moisture Sensitivity Level (MSL 1 required)

Substitute parts are grouped into two categories:

Category A - Direct Equivalents (0.125W, 1/8W): Parts with identical power rating and all primary matching criteria. These include CRCW0805150KFKTA, ERJ-6ENF1503V, KTR10EZPF1503, RC0805FR-07150KL, and AC0805FR-07150KL.

Category B - Higher Power Rating Substitutes (0.4W to 0.5W): Parts with increased power dissipation capability while maintaining all other primary parameters. These include CRCW0805150KFKEAHP (0.5W), RCS0805150KFKEA (0.5W), ERJ-UP6F1503V (0.5W), and ESR10EZPF1503 (0.4W). Higher power ratings provide enhanced pulse withstanding and thermal margin without affecting electrical performance in standard applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance (kΩ)	Tolerance (%)	Power (W)	Package	Temp Coeff (ppm/°C)	Op Temp (°C)	Height Max (mm)	RoHS Status	MSL
RCS2012F154CS	Samsung Electro-Mechanics	150	±1	0.125	0805	±100	-55 to 155	0.66	ROHS3	1
AC0805FR-07150KL	YAGEO	150	±1	0.125	0805	±100	-55 to 155	0.60	ROHS3	1
CRCW0805150KFKEA	Vishay Dale	150	±1	0.125	0805	±100	-55 to 155	0.50	ROHS3	1
CRCW0805150KFKEAHP	Vishay Dale	150	±1	0.5	0805	±100	-55 to 155	0.50	ROHS3	1
CRCW0805150KFKTA	Vishay Dale	150	±1	0.125	0805	±100	-55 to 155	0.50	RoHS non-compliant	1
ERJ-6ENF1503V	Panasonic Electronic Components	150	±1	0.125	0805	±100	-55 to 155	0.70	ROHS3	1
ERJ-UP6F1503V	Panasonic Electronic Components	150	±1	0.5	0805	±100	-55 to 155	0.70	ROHS3	1
ESR10EZPF1503	Rohm Semiconductor	150	±1	0.4	0805	±100	-55 to 155	0.65	ROHS3	1
KTR10EZPF1503	Rohm Semiconductor	150	±1	0.125	0805	±100	-55 to 155	0.65	ROHS3	1
RC0805FR-07150KL	YAGEO	150	±1	0.125	0805	±100	-55 to 155	0.60	ROHS3	1
RCS0805150KFKEA	Vishay Dale	150	±1	0.5	0805	±100	-55 to 155	0.50	ROHS3	1

Engineering Selection Recommendations

For Direct Replacement (Identical 0.125W Power Rating):

AC0805FR-07150KL (YAGEO), CRCW0805150KFKEA (Vishay Dale), ERJ-6ENF1503V (Panasonic), KTR10EZPF1503 (Rohm), and RC0805FR-07150KL (YAGEO) are functionally equivalent to RCS2012F154CS. All maintain ROHS3 compliance, MSL 1 rating, and identical electrical parameters. Selection among these direct equivalents depends on packaging preference (Tape & Reel vs. Cut Tape) and availability.

For Applications Requiring Enhanced Power Dissipation:

CRCW0805150KFKEAHP (Vishay Dale, 0.5W), RCS0805150KFKEA (Vishay Dale, 0.5W), and ERJ-UP6F1503V (Panasonic, 0.5W) provide increased power rating while maintaining all other specifications. ESR10EZPF1503 (Rohm, 0.4W) offers intermediate power capability. These higher-rated parts are suitable for circuits where pulse withstanding or thermal margin enhancement is beneficial.

Compliance Considerations:

CRCW0805150KFKTA (Vishay Dale) is marked as RoHS non-compliant and REACH affected. This part is not recommended for applications requiring ROHS3 compliance.

All ROHS3-compliant substitutes are suitable for direct replacement in applications where the original RCS2012F154CS was specified, provided packaging format and height constraints are accommodated.

Frequently Asked Questions (FAQ)

Q1: Can I substitute a 0.5W rated resistor for the 0.125W RCS2012F154CS?

A: Yes. Higher power-rated resistors (0.5W, 0.4W) are electrically compatible substitutes. The increased power rating provides additional thermal margin and pulse withstanding capability without affecting circuit performance. The resistor will operate at lower stress levels in standard applications. Physical dimensions remain within 0805 package constraints.

Q2: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape wound on reels, suitable for automated assembly processes. Cut Tape (CT) & Digi-Reel® packaging is supplied in shorter tape segments on plastic reels, suitable for manual assembly or smaller production runs. Both formats contain identical components; selection depends on assembly equipment and order quantity requirements.

Q3: Are all listed substitutes ROHS3 compliant?

A: No. CRCW0805150KFKTA is marked as RoHS non-compliant. All other listed substitutes are ROHS3 compliant. Verify compliance requirements for your application before selection.

Q4: Does the height difference between substitute parts affect PCB assembly?

A: Height variations among 0805 package resistors range from 0.50mm to 0.70mm maximum seated height. These differences are within standard PCB assembly tolerances and do not affect reflow soldering or component placement. Verify specific PCB design constraints if height-critical applications are involved.

Q5: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. The part does not require dry-pack storage or baking before assembly. All listed substitutes carry MSL 1 rating.

Q6: Can I use CRCW0805150KFKTA as a substitute despite RoHS non-compliance?

A: CRCW0805150KFKTA is electrically and mechanically compatible but is marked RoHS non-compliant and REACH affected. Use only if your application explicitly permits non-compliant components. For ROHS3-compliant designs, select from the remaining alternatives.

Q7: What is the significance of AEC-Q200 rating on some substitute parts?

A: AEC-Q200 is an automotive qualification standard. Parts carrying this rating have undergone additional reliability testing for automotive applications. The main part RCS2012F154CS does not list AEC-Q200 certification. Substitutes with AEC-Q200 (such as CRCW0805150KFKEA, ERJ-6ENF1503V, KTR10EZPF1503) provide enhanced qualification for automotive or high-reliability applications.

Q8: Are anti-sulfur and pulse withstanding features critical for substitution?

A: These are optional features not required for basic functional equivalence. The RCS2012F154CS includes anti-sulfur and moisture-resistant properties. Substitutes with pulse withstanding (CRCW0805150KFKEAHP, ERJ-UP6F1503V, ESR10EZPF1503) offer additional performance margin. Select based on application environment and reliability requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message