RCS2012F112CS Equivalent & Substitute Parts

Part Overview

The RCS2012F112CS is a 1.1 kOhms ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application certifications such as automotive AEC-Q200 qualification.

Key Parameters

Parameter	Value
Resistance	1.1 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F112CS are classified based on strict electrical and mechanical parameter matching. The primary substitution criteria are:

Core Matching Parameters:

Resistance value: 1.1 kOhms
Tolerance: ±1%
Package format: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS3 compliance
MSL Level 1 rating

Substitution Categories:

Category 1: Direct Equivalents (1/8W Power Rating) Parts with identical 0.125W power rating maintain full functional equivalence with the RCS2012F112CS. These include CRCW08051K10FKEA, ERJ-6ENF1101V, AC0805FR-071K1L, RC0805FR-071K1L, and RMCF0805FT1K10.

Category 2: Higher Power Rating Substitutes (0.4W and 0.5W) Parts with elevated power ratings (ESR10EZPF1101 at 0.4W, CRCW08051K10FKEAHP and RCS08051K10FKEA at 0.5W, ERJ-UP6F1101V at 0.5W) provide enhanced thermal performance while maintaining all other electrical specifications. These are suitable for applications where additional power dissipation margin is required.

All substitute parts maintain identical resistance, tolerance, package dimensions, temperature coefficient, and compliance certifications as the primary part.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Op Temp Range	Height Max (mm)	Features	RoHS	MSL
RCS2012F112CS	Samsung Electro-Mechanics	1.1 kΩ	±1%	0.125W	0805	±100ppm/°C	-55~155°C	0.66	Anti-Sulfur, Moisture Resistant	ROHS3	1
AC0805FR-071K1L	YAGEO	1.1 kΩ	±1%	0.125W	0805	±100ppm/°C	-55~155°C	0.60	Automotive AEC-Q200, Moisture Resistant	ROHS3	1
CRCW08051K10FKEA	Vishay Dale	1.1 kΩ	±1%	0.125W	0805	±100ppm/°C	-55~155°C	0.50	Automotive AEC-Q200	ROHS3	1
CRCW08051K10FKEAHP	Vishay Dale	1.1 kΩ	±1%	0.5W	0805	±100ppm/°C	-55~155°C	0.50	Automotive AEC-Q200, Pulse Withstanding	ROHS3	1
ERJ-6ENF1101V	Panasonic Electronic Components	1.1 kΩ	±1%	0.125W	0805	±100ppm/°C	-55~155°C	0.70	Automotive AEC-Q200	ROHS3	1
ERJ-UP6F1101V	Panasonic Electronic Components	1.1 kΩ	±1%	0.5W	0805	±100ppm/°C	-55~155°C	0.70	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	ROHS3	1
ESR10EZPF1101	Rohm Semiconductor	1.1 kΩ	±1%	0.4W	0805	±100ppm/°C	-55~155°C	0.65	Automotive AEC-Q200, Pulse Withstanding	ROHS3	1
RC0805FR-071K1L	YAGEO	1.1 kΩ	±1%	0.125W	0805	±100ppm/°C	-55~155°C	0.60	Moisture Resistant	ROHS3	1
RCS08051K10FKEA	Vishay Dale	1.1 kΩ	±1%	0.5W	0805	±100ppm/°C	-55~155°C	0.50	Automotive AEC-Q200, Pulse Withstanding	ROHS3	1
RMCF0805FT1K10	Stackpole Electronics Inc	1.1 kΩ	±1%	0.125W	0805	±100ppm/°C	-55~155°C	0.65	Automotive AEC-Q200	ROHS3	1

Engineering Selection Recommendations

For Non-Automotive Applications: RC0805FR-071K1L (YAGEO) provides direct functional equivalence with moisture-resistant properties matching the RCS2012F112CS feature set. This part maintains identical electrical specifications and compliance certifications without automotive qualification overhead.

For Automotive Applications (AEC-Q200 Required): CRCW08051K10FKEA (Vishay Dale), ERJ-6ENF1101V (Panasonic), or RMCF0805FT1K10 (Stackpole Electronics) are suitable direct replacements with 0.125W power rating and AEC-Q200 automotive qualification. All three maintain identical electrical performance and package dimensions.

For Applications Requiring Enhanced Thermal Performance: CRCW08051K10FKEAHP (Vishay Dale, 0.5W), ERJ-UP6F1101V (Panasonic, 0.5W), RCS08051K10FKEA (Vishay Dale, 0.5W), or ESR10EZPF1101 (Rohm, 0.4W) provide increased power dissipation capability while maintaining all other electrical and compliance specifications. These parts are suitable for circuits where thermal margin enhancement is beneficial.

For Anti-Sulfur Requirement: ERJ-UP6F1101V (Panasonic) explicitly includes anti-sulfur properties alongside automotive AEC-Q200 qualification and pulse withstanding capability, matching the environmental protection features of the RCS2012F112CS.

All recommended substitutes maintain ROHS3 compliance, MSL Level 1 rating, and identical operating temperature range (-55°C ~ 155°C).

Frequently Asked Questions (FAQ)

Q: Can CRCW08051K10FKEA be used as a direct replacement for RCS2012F112CS?

A: Yes. CRCW08051K10FKEA matches all core electrical parameters: 1.1 kOhms ±1%, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. The primary difference is automotive AEC-Q200 qualification present in the substitute but not specified in the original part. Physical height is 0.50mm versus 0.66mm for the RCS2012F112CS, which is acceptable for standard PCB layouts.

Q: What is the difference between 0.125W and 0.5W rated parts?

A: Power rating indicates maximum continuous power dissipation capability. A 0.5W part can safely dissipate four times more power than a 0.125W part while maintaining the same resistance value and temperature coefficient. Selection depends on circuit current requirements. If circuit current does not exceed the 0.125W limit, either rating is functionally equivalent. Higher power ratings provide thermal margin for applications with variable or peak current conditions.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification matching the RCS2012F112CS. All parts also maintain MSL Level 1 (Unlimited) moisture sensitivity rating.

Q: Does package height variation affect PCB compatibility?

A: Package height differences (ranging from 0.50mm to 0.70mm maximum seated height) are within standard 0805 component tolerance and do not affect PCB footprint compatibility. All parts use identical 0805 (2012 Metric) land pattern dimensions of 2.00mm length × 1.25mm width.

Q: Which substitute offers the closest physical match to RCS2012F112CS?

A: RC0805FR-071K1L (YAGEO) provides the closest feature alignment with moisture-resistant properties and 0.125W power rating. Height-seated maximum is 0.60mm compared to 0.66mm for the original part, representing minimal dimensional variation.

Q: Can parts with anti-sulfur features be used in non-sulfur-prone environments?

A: Yes. Anti-sulfur and pulse withstanding features are additive capabilities that do not restrict use in standard environments. Parts such as ERJ-UP6F1101V with anti-sulfur properties are fully compatible with applications not requiring these specific protections.

Q: What is the significance of AEC-Q200 qualification?

A: AEC-Q200 is an automotive industry standard qualification indicating the component meets automotive reliability and performance requirements. Parts carrying this certification are suitable for both automotive and general industrial applications. Non-automotive qualified parts may be used in automotive applications if design specifications do not mandate AEC-Q200 compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message