RCS2012F10R7CS Equivalent & Substitute Parts

Part Overview

The RCS2012F10R7CS is a 10.7 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated for 0.125W (1/8W) power dissipation in a 0805 (2012 Metric) surface mount package. This component is designed for general-purpose applications requiring precision resistive elements with anti-sulfur and moisture-resistant properties. The part maintains Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified when applications require alternative sourcing due to inventory constraints, supply chain considerations, or specific performance certifications while maintaining identical electrical and mechanical specifications.

Substiute Parts

RCS2012F10R7CS

Samsung Electro-MechanicsIn Stock: 672RCS2012F10R7CS Datasheet

Current PartRFQ

ERJ-6ENF10R7V

Panasonic Electronic ComponentsIn Stock: 43096ERJ-6ENF10R7V Datasheet

SimilarRFQ

RC0805FR-0710R7L

YAGEOIn Stock: 6691RC0805FR-0710R7L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F10R7CS are qualified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Electrical Parameters:

• Resistance value: 10.7 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)

Mechanical Parameters:

• Package type: 0805 (2012 Metric) (exact match required)
• Number of terminations: 2 (exact match required)
• Composition: Thick Film (exact match required)

Compliance Parameters:

• RoHS3 compliance (required)
• Moisture Sensitivity Level 1 (required)

All identified substitute parts meet these criteria and are therefore electrically and mechanically interchangeable with the main part number.

Parameter Comparison

Engineering Selection Recommendations

All three parts listed—RCS2012F10R7CS (Samsung Electro-Mechanics), ERJ-6ENF10R7V (Panasonic Electronic Components), and RC0805FR-0710R7L (YAGEO)—are functionally equivalent and maintain Active product status with full RoHS3 compliance.

Samsung RCS2012F10R7CS features anti-sulfur and moisture-resistant properties, suitable for general industrial applications requiring enhanced environmental protection.

Panasonic ERJ-6ENF10R7V carries AEC-Q200 automotive qualification, making it appropriate for automotive and automotive-grade applications where this certification is required or preferred.

YAGEO RC0805FR-0710R7L provides moisture-resistant characteristics with the lowest seated height specification (0.024" / 0.60mm), which may be advantageous in space-constrained PCB designs.

Selection between these parts should be based on application requirements, supply availability, and any specific certifications mandated by the end application.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF10R7V replace RCS2012F10R7CS in non-automotive applications?

A: Yes. The ERJ-6ENF10R7V meets all electrical and mechanical specifications required for substitution. The AEC-Q200 automotive qualification is an additional feature that does not restrict use in non-automotive applications.

Q: Are there height differences that affect PCB assembly?

A: Seated height specifications vary slightly: RCS2012F10R7CS (0.66mm), ERJ-6ENF10R7V (0.70mm), and RC0805FR-0710R7L (0.60mm). These differences are within typical PCB assembly tolerances for 0805 components. Verify against specific PCB design constraints if height clearance is critical.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All three parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are all parts RoHS3 compliant?

A: Yes. RCS2012F10R7CS, ERJ-6ENF10R7V, and RC0805FR-0710R7L are all ROHS3 compliant and REACH unaffected.

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur protection specifically addresses corrosion from sulfur-containing environments, while moisture-resistant refers to general protection against humidity and moisture ingress. Both features contribute to component reliability in harsh environments.

Q: Can these parts be used interchangeably in the same PCB design?

A: Yes. All parts share identical electrical specifications (10.7 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C), identical package dimensions (0805 / 2012 Metric), and identical termination configuration (2 terminations). They are mechanically and electrically interchangeable.