RCS2012F1022CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012F1022CS is a 10.2 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. The part is ROHS3 compliant and suitable for general industrial and commercial applications. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to ensure direct circuit board replacement capability.

Key Parameters

Parameter	Value
Resistance	10.2 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Terminations	2
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the RCS2012F1022CS are qualified based on the following criteria:

Primary Substitution Criteria (Mandatory Match):

Resistance value: 10.2 kOhms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Number of terminations: 2
Moisture sensitivity level: 1 (Unlimited)

Secondary Considerations:

Manufacturer certification (AEC-Q200 automotive qualification available in substitute options)
RoHS compliance status
REACH compliance status
Physical height variation within acceptable limits

Substitutes are grouped into two categories: direct equivalents matching all electrical and mechanical specifications, and higher power-rated variants (0.5W/1/2W) suitable for applications requiring increased power dissipation capability while maintaining identical resistance and tolerance values.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp (°C)	Height Max (mm)	RoHS Status	Features
RCS2012F1022CS	Samsung Electro-Mechanics	10.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.66	ROHS3	Anti-Sulfur, Moisture Resistant
CRCW080510K2FKEA	Vishay Dale	10.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.50	ROHS3	Automotive AEC-Q200
CRCW080510K2FKEAHP	Vishay Dale	10.2 kΩ	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	0.50	ROHS3	Automotive AEC-Q200, Pulse Withstanding
CRCW080510K2FKTA	Vishay Dale	10.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.50	RoHS Non-compliant	Automotive AEC-Q200
ERJ-6ENF1022V	Panasonic Electronic Components	10.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.70	ROHS3	Automotive AEC-Q200
RC0805FR-0710K2L	YAGEO	10.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.60	ROHS3	Moisture Resistant
RCS080510K2FKEA	Vishay Dale	10.2 kΩ	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	0.50	ROHS3	Automotive AEC-Q200, Pulse Withstanding
RMCF0805FT10K2	Stackpole Electronics Inc	10.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	0.65	ROHS3	Automotive AEC-Q200

Engineering Selection Recommendations

Direct Equivalents (0.125W, ±1%, 10.2 kΩ):

CRCW080510K2FKEA, ERJ-6ENF1022V, RC0805FR-0710K2L, and RMCF0805FT10K2 are direct electrical and mechanical equivalents to the RCS2012F1022CS. All maintain identical resistance, tolerance, power rating, package dimensions, and operating temperature specifications. All substitute options are ROHS3 compliant. Selection among these equivalents may be based on manufacturer availability, inventory levels, or application-specific certifications. ERJ-6ENF1022V offers the highest inventory availability (122,136 pcs). RC0805FR-0710K2L provides the largest inventory stock (328,211 pcs) and is available in Cut Tape and Digi-Reel packaging options.

Higher Power Rating Variants (0.5W, ±1%, 10.2 kΩ):

CRCW080510K2FKEAHP and RCS080510K2FKEA are suitable substitutes when increased power dissipation capability is required. These parts maintain identical resistance, tolerance, and package specifications while providing 4x power rating (0.5W versus 0.125W). Both incorporate automotive AEC-Q200 qualification and pulse withstanding characteristics. These variants are ROHS3 compliant and maintain the same operating temperature range.

Compliance Considerations:

CRCW080510K2FKTA is RoHS non-compliant and REACH affected; this part is not recommended for new designs or applications requiring regulatory compliance documentation.

All other substitute options are ROHS3 compliant and REACH unaffected, matching the compliance profile of the original RCS2012F1022CS.

Frequently Asked Questions (FAQ)

Q: Can CRCW080510K2FKEAHP (0.5W) be used as a direct replacement for RCS2012F1022CS (0.125W)?

A: Yes. CRCW080510K2FKEAHP is electrically and mechanically compatible. The higher power rating (0.5W versus 0.125W) does not prevent substitution; it provides additional thermal margin. Physical dimensions remain identical (0805 package). This substitution is appropriate when circuit design permits or requires increased power dissipation capability.

Q: What is the difference between CRCW080510K2FKEA and CRCW080510K2FKEAHP?

A: Both are manufactured by Vishay Dale in 0805 package with 10.2 kΩ ±1% resistance. CRCW080510K2FKEA is rated 0.125W (1/8W). CRCW080510K2FKEAHP is rated 0.5W (1/2W) and includes pulse withstanding capability. Electrical specifications (resistance, tolerance, temperature coefficient, operating range) are identical. Selection depends on power dissipation requirements.

Q: Are all substitute parts automotive qualified?

A: Most substitute options carry AEC-Q200 automotive qualification (CRCW080510K2FKEA, CRCW080510K2FKTA, ERJ-6ENF1022V, RMCF0805FT10K2, RCS080510K2FKEA). RC0805FR-0710K2L and the original RCS2012F1022CS do not list AEC-Q200 certification. Selection should align with application requirements.

Q: What is the significance of height variation among substitute parts?

A: All substitute parts maintain 0805 (2012 Metric) package specification with maximum seated heights ranging from 0.50mm to 0.70mm. These variations are within standard 0805 package tolerances and do not affect circuit board assembly compatibility or electrical performance. Height differences reflect manufacturing process variations among different manufacturers.

Q: Can RC0805FR-0710K2L be used if only Cut Tape packaging is available?

A: Yes. RC0805FR-0710K2L is available in Cut Tape (CT) and Digi-Reel packaging. Packaging format does not affect component electrical or mechanical specifications. Cut Tape packaging is suitable for manual assembly or lower-volume production. Tape & Reel (TR) packaging is standard for automated assembly processes.

Q: Is CRCW080510K2FKTA recommended for new designs?

A: No. CRCW080510K2FKTA is RoHS non-compliant and REACH affected. This part does not meet current regulatory requirements for most commercial and industrial applications. Use ROHS3 compliant alternatives (CRCW080510K2FKEA, ERJ-6ENF1022V, RC0805FR-0710K2L, RMCF0805FT10K2, or RCS080510K2FKEA) for new designs.

Q: What inventory considerations apply to substitute selection?

A: RC0805FR-0710K2L offers the highest inventory availability (328,211 pcs). ERJ-6ENF1022V provides substantial stock (122,136 pcs). RMCF0805FT10K2 maintains 39,569 pcs. CRCW080510K2FKEA and RCS080510K2FKEA offer moderate availability (12,822 and 5,153 pcs respectively). Inventory levels may influence lead time and cost considerations in procurement decisions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message