RCS0603J361CS Equivalent & Substitute Parts

Part Overview

The RCS0603J361CS is a 360 Ohms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.05W (1/20W) in a 0201 (0603 Metric) package. This component is designed for high-density surface mount applications requiring anti-sulfur and moisture-resistant characteristics. The part is currently in active production status with 1146 pieces available in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part number becomes unavailable or when alternative packaging formats are required for specific manufacturing processes.

Substiute Parts

RCS0603J361CS

Samsung Electro-MechanicsIn Stock: 1208RCS0603J361CS Datasheet

Current PartRFQ

RC0603J361CS

Samsung Electro-MechanicsIn Stock: 1943RC0603J361CS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RCS0603J361CS is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Non-Negotiable):

• Resistance value: 360 Ohms
• Tolerance: ±5%
• Power rating: 0.05W (1/20W)
• Temperature coefficient: ±250ppm/°C
• Operating temperature range: -55°C ~ 125°C

Mechanical Parameters (Non-Negotiable):

• Package type: 0201 (0603 Metric)
• Physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm)
• Number of terminations: 2

Compliance Parameters (Non-Negotiable):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

The substitute part RC0603J361CS meets all electrical and mechanical equivalence criteria. The primary difference is packaging format: RCS0603J361CS is supplied in Tape & Reel (TR) format, while RC0603J361CS is supplied in Cut Tape (CT) format. Both parts are manufactured by Samsung Electro-Mechanics and share identical electrical specifications, physical dimensions, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both RCS0603J361CS and RC0603J361CS are active production parts manufactured by Samsung Electro-Mechanics with full ROHS3 compliance and REACH unaffected status. Selection between these parts is determined by packaging requirements and manufacturing process specifications:

RCS0603J361CS (Tape & Reel Format): Suitable for high-volume automated assembly operations utilizing tape-fed pick-and-place equipment. Tape & Reel packaging provides continuous component feed and is optimized for production environments with reel-based component handling systems.

RC0603J361CS (Cut Tape Format): Suitable for lower-volume production runs, prototype development, or assembly processes utilizing manual or semi-automated placement equipment. Cut Tape packaging provides flexibility for mixed-component assembly and reduced minimum order quantities.

Both parts deliver identical electrical performance, thermal characteristics, and environmental compliance. The selection between these substitutes is based solely on manufacturing process compatibility and supply chain availability, not on functional or performance differences.

Frequently Asked Questions (FAQ)

Q: Can RC0603J361CS be used as a direct replacement for RCS0603J361CS in production assembly?

A: Yes, RC0603J361CS is electrically and mechanically equivalent to RCS0603J361CS. The primary difference is packaging format. If your assembly equipment is configured for Cut Tape (CT) format, RC0603J361CS is a direct functional substitute. If your equipment requires Tape & Reel (TR) format, the packaging must be converted or the equipment must be reconfigured.

Q: Are there any performance differences between the two parts?

A: No. Both parts share identical electrical specifications (360 Ohms ±5%, 0.05W), temperature coefficient (±250ppm/°C), operating temperature range (-55°C ~ 125°C), and physical dimensions (0.024" L x 0.012" W). The seated height differs by 0.01mm (0.25mm vs 0.26mm), which is within typical manufacturing tolerance and does not affect circuit performance.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both RCS0603J361CS and RC0603J361CS are ROHS3 compliant, REACH unaffected, and carry Moisture Sensitivity Level 1 (Unlimited). They are suitable for applications with identical environmental and regulatory requirements.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel within a carrier tape, optimized for automated high-speed pick-and-place assembly. Cut Tape (CT) packaging supplies components in short tape segments, typically 2-5 meters, suitable for lower-volume or mixed-component assembly processes. Both formats contain the same component; the difference is in delivery and handling format.

Q: Can I mix inventory between RCS0603J361CS and RC0603J361CS?

A: Mixing is possible only if your assembly process can accommodate both packaging formats. If your equipment is dedicated to one format, inventory mixing requires either equipment reconfiguration or manual repackaging, which may not be cost-effective.