RCP2512W75R0GS2 Equivalent & Substitute Parts

Part Overview

The RCP2512W75R0GS2 is a 75 Ohm ±2% 4.6W chip resistor in 2512 (6432 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component operates across -65°C to 155°C and is currently in active production status. Substitute parts are identified to address inventory availability, compliance requirements, or supply chain continuity needs while maintaining electrical and mechanical compatibility.

Substiute Parts

RCP2512W75R0GS2

Vishay DaleIn Stock: 1058RCP2512W75R0GS2 Datasheet

Current PartRFQ

RCP2512W75R0GEB

Vishay DaleIn Stock: 1222RCP2512W75R0GEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP2512W75R0GS2 is determined by strict equivalence across the following critical parameters:

• Resistance value: 75 Ohms
• Tolerance: ±2%
• Power rating: 4.6W
• Package: 2512 (6432 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance feature
• Number of terminations: 2

Parts meeting all these criteria are classified as direct electrical and mechanical equivalents. Packaging format (Tape & Reel) and series designation (RCP) remain consistent across substitute relationships.

Parameter Comparison

Engineering Selection Recommendations

Both RCP2512W75R0GS2 and RCP2512W75R0GEB are electrically and mechanically equivalent. The primary distinction is RoHS compliance status:

• RCP2512W75R0GS2: RoHS non-compliant
• RCP2512W75R0GEB: ROHS3 Compliant

Selection between these parts depends on regulatory and compliance requirements of the end application. For applications requiring RoHS3 compliance, RCP2512W75R0GEB is the appropriate selection. For applications without RoHS compliance mandates, either part is functionally interchangeable. Both parts maintain identical electrical performance, thermal characteristics, and mechanical fit within the 2512 package footprint.

Frequently Asked Questions (FAQ)

Q: Can RCP2512W75R0GEB be used as a direct replacement for RCP2512W75R0GS2?

A: Yes. Both parts are electrically and mechanically equivalent, sharing identical resistance, tolerance, power rating, package dimensions, and operating specifications. The substitute part is suitable for direct PCB placement without design modification.

Q: What is the primary difference between these two part numbers?

A: The primary difference is RoHS compliance certification. RCP2512W75R0GEB is ROHS3 compliant, while RCP2512W75R0GS2 is RoHS non-compliant. All electrical and mechanical parameters are identical.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 2512 (6432 Metric) package with identical dimensions of 0.250" L x 0.124" W (6.35mm x 3.15mm) and maximum seated height of 0.025" (0.64mm). PCB footprints are interchangeable.

Q: Do these parts have the same moisture sensitivity rating?

A: Yes. Both parts have Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can I mix these part numbers in the same production batch?

A: Yes, from an electrical and mechanical standpoint. However, compliance documentation and traceability records should reflect the specific part number used in each assembly, particularly if RoHS certification is required for the end product.