RCP2512W10R0GS3 Equivalent & Substitute Parts

Part Overview

The RCP2512W10R0GS3 is a 10 Ohm ±2% 4.6W chip resistor in 2512 (6432 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component operates across -65°C to 155°C and is currently in active production status. Substitute parts are identified to address packaging format availability, compliance requirements, or inventory constraints while maintaining identical electrical and mechanical specifications.

Substiute Parts

RCP2512W10R0GS3

Vishay DaleIn Stock: 876RCP2512W10R0GS3 Datasheet

Current PartRFQ

RCP2512W10R0GEB

Vishay DaleIn Stock: 1993RCP2512W10R0GEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RCP2512W10R0GS3 is determined by equivalence across the following critical parameters:

• Resistance value: 10 Ohms
• Tolerance: ±2%
• Power rating: 4.6W
• Package / Case: 2512 (6432 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±150ppm/°C
• Operating Temperature Range: -65°C ~ 155°C
• Physical dimensions and termination count

The identified substitute part RCP2512W10R0GEB maintains all electrical and mechanical specifications. The primary difference is packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is available in Cut Tape (CT) format. Both parts are from the same RCP series and manufacturer.

Parameter Comparison

Engineering Selection Recommendations

Both RCP2512W10R0GS3 and RCP2512W10R0GEB are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on:

Packaging Format Requirements: Choose RCP2512W10R0GS3 (Tape & Reel) for automated assembly processes requiring continuous reel feeding. Select RCP2512W10R0GEB (Cut Tape) for manual assembly, small-batch production, or applications where individual component handling is preferred.

Compliance Requirements: RCP2512W10R0GEB carries ROHS3 compliance certification, while RCP2512W10R0GS3 is RoHS non-compliant. Applications subject to RoHS directives or customer compliance mandates must use RCP2512W10R0GEB.

Inventory Availability: RCP2512W10R0GEB currently maintains higher stock levels (1897 Pcs) compared to RCP2512W10R0GS3 (852 Pcs), which may influence procurement decisions for time-sensitive projects.

Frequently Asked Questions (FAQ)

Q: Can RCP2512W10R0GEB be used as a direct replacement for RCP2512W10R0GS3 in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape vs. Tape & Reel). PCB footprint, soldering characteristics, and performance parameters are equivalent.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel packaging supplies components on continuous reels suitable for automated pick-and-place assembly. Cut Tape packaging provides components on tape segments, typically used for manual assembly or lower-volume production runs. Both formats contain the same component.

Q: Does the RoHS compliance difference affect component performance?

A: No. RoHS compliance relates to material composition and environmental regulations, not electrical performance. Both parts meet identical electrical specifications. RoHS3 compliance of RCP2512W10R0GEB indicates adherence to current environmental directives.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts are 0.250" L x 0.124" W (6.35mm x 3.15mm) with maximum seated height of 0.025" (0.64mm). They are mechanically interchangeable on PCBs designed for 2512 package components.

Q: Which part should be selected for new designs?

A: For new designs, RCP2512W10R0GEB is recommended due to ROHS3 compliance and higher current inventory availability. Both parts are active production components suitable for long-term supply chain stability.