RCP1206W75R0JS6 Equivalent & Substitute Parts

Part Overview

The RCP1206W75R0JS6 is a 75 Ohm ±5% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is designed for high-power applications requiring reliable performance across industrial temperature ranges. The part is currently active in production with 920 pieces available in stock. Substitute parts are identified to address specific application requirements such as improved tolerance specifications or enhanced compliance certifications.

Substiute Parts

RCP1206W75R0JS6

Vishay DaleIn Stock: 1020RCP1206W75R0JS6 Datasheet

Current PartRFQ

RCP1206W75R0GEB

Vishay DaleIn Stock: 7331RCP1206W75R0GEB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP1206W75R0JS6 is determined by the following critical parameters:

• Resistance Value: Must be 75 Ohms
• Package / Case: Must be 1206 (3216 Metric)
• Power Rating: Must be 2.4W minimum
• Composition: Must be Thick Film
• Temperature Coefficient: ±150ppm/°C
• Operating Temperature Range: -65°C ~ 155°C minimum
• Moisture Resistance: Required feature
• Number of Terminations: 2 terminations

The RCP1206W75R0GEB qualifies as a direct substitute because it maintains all critical electrical and mechanical parameters while offering improved tolerance specification (±2% versus ±5%) and enhanced RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

RCP1206W75R0JS6 is suitable for applications where ±5% tolerance is acceptable and RoHS compliance is not a requirement. This part maintains full electrical and thermal performance specifications for standard industrial applications.

RCP1206W75R0GEB is the preferred substitute when ROHS3 compliance is mandated or when tighter tolerance control (±2%) is required for precision circuit design. Both parts are active in production with adequate inventory availability. The RCP1206W75R0GEB offers superior compliance certification while maintaining identical electrical performance and package dimensions.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W75R0GEB replace RCP1206W75R0JS6 in existing designs?

A: Yes. Both parts share identical resistance value, power rating, package dimensions, and thermal characteristics. The substitute offers improved tolerance (±2% vs ±5%) and ROHS3 compliance, making it a direct functional replacement.

Q: What is the primary difference between these two parts?

A: The main differences are tolerance specification and RoHS compliance status. RCP1206W75R0GEB provides ±2% tolerance compared to ±5% for the main part, and carries ROHS3 certification versus non-compliant status.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 1206 (3216 Metric) package with identical dimensions of 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm).

Q: Do both parts operate across the same temperature range?

A: Yes. Both parts operate from -65°C to 155°C with identical temperature coefficient of ±150ppm/°C.

Q: What is the moisture sensitivity level for both parts?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling requirements during storage or assembly.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.