RCP1206W75R0GS3 Equivalent & Substitute Parts

Part Overview

The RCP1206W75R0GS3 is a 75 Ohm ±2% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is designed for applications requiring precision resistive elements with moderate power dissipation in compact form factors. The part maintains Active product status and is suitable for general-purpose SMD circuit applications across industrial and commercial temperature ranges.

Substitute parts are identified to address inventory availability, compliance requirements, or supply chain continuity while maintaining electrical and mechanical compatibility.

Substiute Parts

RCP1206W75R0GS3

Vishay DaleIn Stock: 1163RCP1206W75R0GS3 Datasheet

Current PartRFQ

RCP1206W75R0GEB

Vishay DaleIn Stock: 7331RCP1206W75R0GEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP1206W75R0GS3 is determined by strict equivalence across the following critical parameters:

• Resistance value: 75 Ohms
• Tolerance: ±2%
• Power rating: 2.4W
• Package type: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance: Required
• Termination count: 2
• MSL rating: 1 (Unlimited)

The RCP1206W75R0GEB meets all electrical and mechanical parameters required for direct substitution. Both parts are manufactured by Vishay Dale within the RCP series and share identical functional specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RCP1206W75R0GS3 and RCP1206W75R0GEB are electrically and mechanically equivalent for circuit applications. The primary distinction is RoHS compliance status: RCP1206W75R0GEB carries ROHS3 compliance, while RCP1206W75R0GS3 is RoHS non-compliant.

Selection between these parts should be based on regulatory and procurement requirements. Applications subject to RoHS directives or customer specifications requiring RoHS3 compliance must use RCP1206W75R0GEB. Applications without RoHS compliance mandates may use either part based on availability and supply chain considerations.

Both parts maintain Active product status and identical electrical performance across the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W75R0GEB be used as a direct replacement for RCP1206W75R0GS3?

A: Yes. Both parts are electrically and mechanically identical, sharing the same resistance value (75 Ohms), tolerance (±2%), power rating (2.4W), package type (1206), and operating specifications. The parts are pin-compatible and functionally interchangeable in circuit applications.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance certification. RCP1206W75R0GEB is ROHS3 compliant, while RCP1206W75R0GS3 is RoHS non-compliant. All electrical and mechanical parameters are identical.

Q: Are there any package or footprint differences?

A: No. Both parts use the 1206 (3216 Metric) package with identical dimensions (0.122" L x 0.060" W / 3.10mm x 1.52mm) and maximum seated height (0.025" / 0.64mm). PCB footprints and assembly processes are identical.

Q: Which part should I specify for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance, specify RCP1206W75R0GEB. For applications without RoHS compliance mandates, either part is acceptable based on availability and supply chain factors.

Q: Do these parts have different temperature coefficients or operating ranges?

A: No. Both parts share identical temperature coefficient (±150ppm/°C) and operating temperature range (-65°C ~ 155°C).

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.