RCP1206W75R0GS2 Equivalent & Substitute Parts

Part Overview

The RCP1206W75R0GS2 is a 75 Ohm ±2% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is designed for applications requiring precision resistive elements with moderate power dissipation in compact form factors. The part maintains Active product status and is suitable for general-purpose SMD circuit applications across industrial and commercial temperature ranges.

Substitute parts are identified to address inventory availability, compliance requirements, or supply chain continuity while maintaining electrical and mechanical compatibility.

Substiute Parts

RCP1206W75R0GS2

Vishay DaleIn Stock: 1251RCP1206W75R0GS2 Datasheet

Current PartRFQ

RCP1206W75R0GEB

Vishay DaleIn Stock: 7331RCP1206W75R0GEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP1206W75R0GS2 is determined by strict equivalence across the following critical parameters:

• Resistance value: 75 Ohms
• Tolerance: ±2%
• Power rating: 2.4W
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance: Required
• Termination count: 2

The substitute part RCP1206W75R0GEB meets all electrical and mechanical specifications. Substitution is valid when circuit design does not impose additional constraints beyond these parameters.

Parameter Comparison

Engineering Selection Recommendations

Both RCP1206W75R0GS2 and RCP1206W75R0GEB are electrically and mechanically equivalent. Selection between these parts should be based on regulatory and compliance requirements:

The RCP1206W75R0GEB offers ROHS3 compliance, making it suitable for applications subject to RoHS directives or customer specifications requiring lead-free or restricted substance compliance. The RCP1206W75R0GS2 is RoHS non-compliant and appropriate for applications without such regulatory constraints.

Both parts share identical electrical performance, package dimensions, and thermal characteristics. Inventory availability and supply chain lead times may also influence selection.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W75R0GEB replace RCP1206W75R0GS2 in existing designs?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters including resistance, tolerance, power rating, package dimensions, and operating temperature range. Direct substitution is valid at the component level.

Q: What is the primary difference between these two parts?

A: The RCP1206W75R0GEB is ROHS3 compliant, while the RCP1206W75R0GS2 is RoHS non-compliant. All other electrical and mechanical specifications are identical.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 1206 (3216 Metric) package with identical dimensions of 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm). PCB footprints are interchangeable.

Q: Do these parts have the same moisture sensitivity rating?

A: Yes. Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture-related handling restrictions during storage or assembly.

Q: Can I use either part in high-temperature applications?

A: Yes. Both parts operate across the identical temperature range of -65°C to 155°C with a temperature coefficient of ±150ppm/°C.

Q: Are the tape and reel packaging specifications the same?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging format suitable for automated assembly processes.