RCP1206W200RGTP Equivalent & Substitute Parts

Part Overview

The RCP1206W200RGTP is a 200 Ohms ±2% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is designed for surface mount applications requiring stable resistance performance across industrial temperature ranges. The part maintains Active product status and is available in Tape & Reel packaging for automated assembly processes. Substitute parts are identified when electrical specifications, mechanical dimensions, and packaging compatibility align with the original component requirements.

Substiute Parts

RCP1206W200RGTP

Vishay DaleIn Stock: 890RCP1206W200RGTP Datasheet

Current PartRFQ

RCP1206W200RGEB

Vishay DaleIn Stock: 1879RCP1206W200RGEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP1206W200RGTP is determined by strict equivalence across the following parameters:

• Resistance value: 200 Ohms
• Tolerance: ±2%
• Power rating: 2.4W
• Package dimensions: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance: Required
• Moisture sensitivity level: 1 (Unlimited)

The substitute part RCP1206W200RGEB meets all electrical and mechanical specifications required for direct substitution in applications designed for the RCP1206W200RGTP.

Parameter Comparison

Engineering Selection Recommendations

Both RCP1206W200RGTP and RCP1206W200RGEB are Active products from Vishay Dale's RCP series with identical electrical and mechanical specifications. The primary distinction is RoHS compliance status: RCP1206W200RGTP is RoHS non-compliant, while RCP1206W200RGEB is ROHS3 compliant. Selection between these parts depends on regulatory requirements for the end application. For applications requiring ROHS3 compliance, RCP1206W200RGEB is the appropriate choice. For applications without RoHS compliance mandates, either part is functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W200RGEB replace RCP1206W200RGTP in existing designs?

A: Yes. Both parts are electrically and mechanically identical with matching resistance, tolerance, power rating, temperature coefficient, and package dimensions. The substitute part is compatible with existing PCB layouts and assembly processes designed for the original component.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance certification. RCP1206W200RGEB is ROHS3 compliant, while RCP1206W200RGTP is RoHS non-compliant. All electrical and mechanical parameters are identical.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 1206 (3216 Metric) package with identical dimensions of 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm). They are mechanically interchangeable on PCBs designed for 1206 resistors.

Q: Can these parts be used interchangeably in automated assembly?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging, which is standard for automated surface mount assembly equipment. The identical package specifications ensure compatibility with existing pick-and-place machine configurations.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage procedures are sufficient without special moisture control measures.