RCP1206W10R0JS6 Equivalent & Substitute Parts

Part Overview

The RCP1206W10R0JS6 is a 10 Ohms ±5% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is actively produced and widely used in industrial and commercial applications requiring reliable power dissipation in compact form factors. Substitute parts are identified to address specific requirements such as improved tolerance specifications, enhanced compliance certifications, or alternative packaging formats while maintaining core electrical and mechanical compatibility.

Substiute Parts

RCP1206W10R0JS6

Vishay DaleIn Stock: 977RCP1206W10R0JS6 Datasheet

Current PartRFQ

RCP1206W10R0GEB

Vishay DaleIn Stock: 4995RCP1206W10R0GEB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP1206W10R0JS6 is determined by the following critical parameters:

• Resistance Value: Must be 10 Ohms
• Package / Case: Must be 1206 (3216 Metric)
• Power Rating: Must be 2.4W or greater
• Composition: Must be Thick Film
• Temperature Coefficient: Must be ±150ppm/°C or better
• Operating Temperature Range: Must cover -65°C ~ 155°C
• Features: Must include Moisture Resistant capability
• Moisture Sensitivity Level: Must be 1 (Unlimited)

The RCP1206W10R0GEB qualifies as a direct substitute based on these parameters. While tolerance is improved (±2% versus ±5%), all other electrical and mechanical specifications remain equivalent or superior, ensuring functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The RCP1206W10R0GEB serves as a direct functional equivalent to the RCP1206W10R0JS6 with the following considerations:

Tolerance Improvement: The substitute part offers ±2% tolerance compared to ±5% in the main part. This tighter tolerance specification provides enhanced precision for applications requiring stricter resistance value control.

Compliance Enhancement: The RCP1206W10R0GEB is ROHS3 compliant, whereas the RCP1206W10R0JS6 is RoHS non-compliant. Selection of the substitute part is recommended for applications subject to RoHS regulatory requirements or environmental compliance mandates.

Packaging Format: The main part is supplied in Tape & Reel (TR) format, while the substitute is available in Cut Tape (CT) format. Packaging selection should align with assembly process requirements and inventory management practices.

All other electrical and mechanical parameters are identical, confirming full interchangeability for circuit design purposes.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W10R0GEB be used as a direct replacement for RCP1206W10R0JS6?

A: Yes. Both parts share identical resistance value (10 Ohms), power rating (2.4W), package type (1206), temperature coefficient (±150ppm/°C), and operating temperature range (-65°C ~ 155°C). The substitute offers improved tolerance (±2% versus ±5%) and enhanced RoHS compliance.

Q: What is the primary difference between these two parts?

A: The main differences are tolerance specification (±2% versus ±5%), RoHS compliance status (ROHS3 Compliant versus non-compliant), and packaging format (Cut Tape versus Tape & Reel). Electrical performance and thermal characteristics are equivalent.

Q: Are the physical dimensions identical?

A: Yes. Both parts are 1206 (3216 Metric) package with identical dimensions: 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm). They are mechanically interchangeable on PCB layouts.

Q: Which part should I select for new designs?

A: Selection depends on specific application requirements. Choose RCP1206W10R0GEB for applications requiring RoHS3 compliance or tighter tolerance specifications. The RCP1206W10R0JS6 remains suitable for applications without these constraints.

Q: Are both parts actively manufactured?

A: Yes. Both the RCP1206W10R0JS6 and RCP1206W10R0GEB maintain Active product status with Vishay Dale and are available in production quantities.