RCP1206W100RGTP Equivalent & Substitute Parts

Part Overview

The RCP1206W100RGTP is a 100 Ohms ±2% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is designed for applications requiring precision resistive elements with moderate power dissipation. The part maintains Active product status and is available in Tape & Reel packaging. Substitute parts are identified when packaging format changes or compliance requirements differ while maintaining identical electrical and mechanical specifications.

Substiute Parts

RCP1206W100RGTP

Vishay DaleIn Stock: 1152RCP1206W100RGTP Datasheet

Current PartRFQ

RCP1206W100RGEB

Vishay DaleIn Stock: 2860RCP1206W100RGEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RCP1206W100RGTP is determined by equivalence across the following critical parameters: resistance value (100 Ohms), tolerance (±2%), power rating (2.4W), package type (1206), composition (thick film), temperature coefficient (±150ppm/°C), operating temperature range (-65°C ~ 155°C), and moisture resistance feature. The identified substitute maintains all electrical specifications and physical dimensions while differing only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both RCP1206W100RGTP and RCP1206W100RGEB are electrically and mechanically equivalent. Selection between these parts depends on two factors: packaging requirements and regulatory compliance. The RCP1206W100RGTP is supplied in Tape & Reel format, suitable for high-volume automated assembly operations. The RCP1206W100RGEB is supplied in Cut Tape & Digi-Reel® format and carries ROHS3 compliance certification, making it the appropriate choice for applications subject to RoHS3 regulatory requirements. Both parts are Active status components from the same manufacturer and series, ensuring consistent performance characteristics across all specified electrical and thermal parameters.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W100RGEB replace RCP1206W100RGTP in my design?

A: Yes. Both parts are electrically and mechanically identical. The substitute differs only in packaging format and RoHS compliance status. Functional performance is equivalent across all operating conditions.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on reels, optimized for high-speed automated pick-and-place assembly. Cut Tape & Digi-Reel® packaging provides components on cut tape segments and alternative reel formats, suitable for lower-volume production or mixed-component assembly scenarios.

Q: Does RoHS3 compliance affect electrical performance?

A: No. RoHS3 compliance is a material composition and manufacturing standard that does not alter the electrical specifications, power rating, tolerance, or temperature characteristics of the resistor.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts are 1206 (3216 Metric) package with identical dimensions: 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm).

Q: Which part should I select for new designs?

A: Selection is based on assembly requirements and regulatory scope. For RoHS3-regulated applications, use RCP1206W100RGEB. For applications without RoHS3 requirements, either part is acceptable based on packaging preference.