RCP1206B50R0GTP Equivalent & Substitute Parts

Part Overview

The RCP1206B50R0GTP is a 50 Ohm ±2% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component operates across -65°C to 155°C and is classified as Active product status. Substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across the same package footprint and performance envelope.

Substiute Parts

RCP1206B50R0GTP

Vishay DaleIn Stock: 1080RCP1206B50R0GTP Datasheet

Current PartRFQ

RCP1206W50R0GEB

Vishay DaleIn Stock: 2355RCP1206W50R0GEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP1206B50R0GTP is determined by strict equivalence across the following critical parameters:

• Resistance value: 50 Ohms
• Tolerance: ±2%
• Power rating: 2.4W
• Package footprint: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance feature
• Moisture sensitivity level: 1 (Unlimited)

The substitute part RCP1206W50R0GEB meets all these criteria and is manufactured by the same supplier (Vishay Dale) within the same RCP series.

Parameter Comparison

Engineering Selection Recommendations

Both RCP1206B50R0GTP and RCP1206W50R0GEB are electrically and mechanically equivalent. The primary distinction is RoHS compliance status: RCP1206B50R0GTP is RoHS non-compliant, while RCP1206W50R0GEB is ROHS3 compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. For applications requiring ROHS3 compliance, RCP1206W50R0GEB is the appropriate selection. Both parts maintain identical electrical performance, thermal characteristics, and physical footprint compatibility.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W50R0GEB be used as a direct replacement for RCP1206B50R0GTP?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters including resistance value, tolerance, power rating, temperature coefficient, operating temperature range, package dimensions, and moisture resistance characteristics. The difference is RoHS compliance status only.

Q: What is the significance of the RoHS compliance difference?

A: RCP1206B50R0GTP is RoHS non-compliant while RCP1206W50R0GEB is ROHS3 compliant. This distinction affects regulatory eligibility for applications subject to RoHS directives. Component selection should align with applicable compliance requirements for the target market and application.

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical 1206 (3216 Metric) package footprint with dimensions of 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm). PCB layout and assembly processes require no modification when substituting between these parts.

Q: Do both parts have the same thermal performance?

A: Yes. Both parts operate across -65°C to 155°C with identical temperature coefficient of ±150ppm/°C and moisture sensitivity level of 1 (Unlimited). Thermal behavior and reliability characteristics are equivalent.

Q: What packaging formats are available?

A: Both parts are supplied in Tape & Reel (TR) format suitable for automated assembly processes.