RCP1206B200RGS2 Equivalent & Substitute Parts

Part Overview

The RCP1206B200RGS2 is a 200 Ohms ±2% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component operates across -65°C to 155°C and is classified as Active product status. Substitute parts are identified to address inventory availability, compliance requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

RCP1206B200RGS2

Vishay DaleIn Stock: 992RCP1206B200RGS2 Datasheet

Current PartRFQ

RCP1206W200RGEB

Vishay DaleIn Stock: 1879RCP1206W200RGEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by matching the following critical parameters:

• Resistance Value: 200 Ohms (exact match required)
• Tolerance: ±2% (exact match required)
• Power Rating: 2.4W (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±150ppm/°C (exact match required)
• Operating Temperature Range: -65°C ~ 155°C (exact match required)
• Features: Moisture Resistant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The substitute part RCP1206W200RGEB meets all electrical and mechanical parameters specified for the RCP1206B200RGS2, confirming direct substitutability within the RCP series.

Parameter Comparison

Engineering Selection Recommendations

Both RCP1206B200RGS2 and RCP1206W200RGEB are Active status components from Vishay Dale with identical electrical and mechanical specifications. The primary distinction is RoHS compliance: RCP1206B200RGS2 is RoHS non-compliant, while RCP1206W200RGEB is ROHS3 compliant. Selection between these parts depends on regulatory requirements for the end application. For applications requiring RoHS3 compliance, RCP1206W200RGEB is the appropriate selection. For applications without RoHS compliance mandates, either part is electrically and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W200RGEB replace RCP1206B200RGS2 in my circuit?

A: Yes. Both parts are electrically and mechanically identical with matching resistance, tolerance, power rating, temperature coefficient, operating temperature range, package dimensions, and termination count. The primary difference is RoHS compliance status.

Q: What is the key difference between these two parts?

A: RCP1206B200RGS2 is RoHS non-compliant, while RCP1206W200RGEB is ROHS3 compliant. All other electrical and mechanical parameters are identical.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 1206 (3216 Metric) package with dimensions of 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm).

Q: Do these parts have the same temperature operating range?

A: Yes. Both parts operate across -65°C to 155°C with a temperature coefficient of ±150ppm/°C.

Q: Can I use these parts interchangeably on the same PCB?

A: Yes. Both parts have identical footprints, termination count (2), and physical dimensions, allowing direct substitution on the same printed circuit board layout.