RCP1206B10R0JEB Equivalent & Substitute Parts

Part Overview

The RCP1206B10R0JEB is a 10 Ohm ±5% 2.4W thick film chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This component is actively produced and widely used in applications requiring moisture-resistant surface mount resistors with moderate tolerance specifications. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained while potentially offering improved tolerance, packaging format, or inventory availability.

Substiute Parts

RCP1206B10R0JEB

Vishay DaleIn Stock: 920RCP1206B10R0JEB Datasheet

Current PartRFQ

RCP1206W10R0GEB

Vishay DaleIn Stock: 4995RCP1206W10R0GEB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP1206B10R0JEB is determined by the following critical parameters:

• Resistance Value: Must be 10 Ohms
• Package / Case: Must be 1206 (3216 Metric) for mechanical and electrical compatibility
• Power Rating: Must be 2.4W or greater
• Composition: Must be Thick Film
• Temperature Coefficient: ±150ppm/°C
• Operating Temperature Range: -65°C ~ 155°C minimum
• Moisture Resistance: Required feature
• RoHS Compliance: ROHS3 Compliant

The RCP1206W10R0GEB qualifies as a direct substitute because it maintains all critical electrical and mechanical parameters while offering improved tolerance (±2% versus ±5%), indicating tighter resistance value control. Both components share identical package dimensions, power rating, temperature characteristics, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RCP1206B10R0JEB and RCP1206W10R0GEB are active production components from Vishay Dale with full ROHS3 compliance and MSL 1 rating. The RCP1206W10R0GEB offers improved tolerance specification (±2% versus ±5%), which may be advantageous in applications requiring tighter resistance value control. Both components maintain identical thermal characteristics, moisture resistance properties, and operating temperature ranges. Selection between these parts should be based on tolerance requirements and packaging format availability (Tape & Reel versus Cut Tape).

Frequently Asked Questions (FAQ)

Q: Can RCP1206W10R0GEB replace RCP1206B10R0JEB in existing designs?

A: Yes. Both components share identical resistance value, power rating, package dimensions, and thermal specifications. The substitute offers improved tolerance (±2% versus ±5%), making it suitable for direct substitution in applications where the original tolerance is acceptable or where tighter tolerance is beneficial.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both components use the 1206 (3216 Metric) package with identical dimensions: 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm). PCB footprints are interchangeable.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape packaging is supplied in shorter tape segments for manual handling or smaller volume applications. Both formats contain identical components.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both RCP1206B10R0JEB and RCP1206W10R0GEB are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and identical ECCN and HTSUS classifications.

Q: What is the significance of the tolerance difference?

A: The RCP1206W10R0GEB tolerance of ±2% provides tighter control of the actual resistance value compared to the ±5% tolerance of the RCP1206B10R0JEB. Applications requiring precise resistance values benefit from the improved tolerance specification.