RCP1206B100RGTP Equivalent & Substitute Parts

Part Overview

The RCP1206B100RGTP is a 100 Ohms ±2% 2.4W chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is classified as Active product status. Substitute parts are identified when packaging format or compliance requirements differ while maintaining identical electrical and mechanical specifications.

Substiute Parts

RCP1206B100RGTP

Vishay DaleIn Stock: 1237RCP1206B100RGTP Datasheet

Current PartRFQ

RCP1206W100RGEB

Vishay DaleIn Stock: 2860RCP1206W100RGEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RCP1206B100RGTP is determined by equivalence in the following critical parameters: resistance value (100 Ohms), tolerance (±2%), power rating (2.4W), package type (1206), composition (thick film), temperature coefficient (±150ppm/°C), operating temperature range (-65°C ~ 155°C), and moisture resistance features. The identified substitute differs only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and RoHS compliance status, with all electrical and mechanical specifications remaining identical.

Parameter Comparison

Engineering Selection Recommendations

RCP1206B100RGTP and RCP1206W100RGEB are electrically and mechanically equivalent 100 Ohm 2.4W 1206 chip resistors from Vishay Dale's RCP series. Selection between these parts is determined by packaging requirements and regulatory compliance needs. RCP1206B100RGTP is supplied in Tape & Reel format and carries RoHS non-compliant status. RCP1206W100RGEB is supplied in Cut Tape & Digi-Reel® format and meets ROHS3 compliance requirements. Both parts maintain identical electrical performance, thermal characteristics, and physical dimensions. Component selection should be based on procurement packaging specifications and applicable RoHS compliance mandates for the end application.

Frequently Asked Questions (FAQ)

Q: Are RCP1206B100RGTP and RCP1206W100RGEB electrically interchangeable?

A: Yes. Both parts are 100 Ohm ±2% 2.4W thick film resistors with identical temperature coefficients (±150ppm/°C), operating temperature ranges (-65°C ~ 155°C), and moisture resistance features. Electrical performance is equivalent.

Q: What is the primary difference between these two part numbers?

A: The primary differences are packaging format and RoHS compliance status. RCP1206B100RGTP uses Tape & Reel packaging and is RoHS non-compliant. RCP1206W100RGEB uses Cut Tape & Digi-Reel® packaging and is ROHS3 compliant.

Q: Can RCP1206W100RGEB replace RCP1206B100RGTP in a design?

A: Substitution is valid when packaging format and RoHS compliance requirements align with design specifications. Both parts occupy identical 1206 package footprints with matching dimensions and termination counts, enabling direct PCB placement compatibility.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel and Cut Tape & Digi-Reel® packaging formats do not alter component electrical characteristics. Packaging selection is determined by assembly process requirements and inventory management practices.

Q: What does ROHS3 compliance mean for RCP1206W100RGEB?

A: ROHS3 compliance indicates the component meets Restriction of Hazardous Substances Directive requirements. RCP1206B100RGTP does not carry this certification. Selection between compliant and non-compliant versions depends on regulatory requirements applicable to the end product.