RCP0505W75R0JEB Equivalent & Substitute Parts

Part Overview

The RCP0505W75R0JEB is a 75 Ohm ±5% 1.4W chip resistor manufactured by Vishay Dale in the 0505 (1412 Metric) package. This moisture-resistant thick film resistor is classified as Active product status and is RoHS3 compliant. Finding equivalent and substitute parts may be necessary due to inventory constraints, lead time requirements, or application-specific tolerance and performance needs.

Substiute Parts

RCP0505W75R0JEB

Vishay DaleIn Stock: 1024RCP0505W75R0JEB Datasheet

Current PartRFQ

RCP0505W75R0GEB

Vishay DaleIn Stock: 1947RCP0505W75R0GEB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RCP0505W75R0JEB is determined by strict equivalence in the following parameters:

• Resistance value: 75 Ohms (exact match required)
• Power rating: 1.4W (exact match required)
• Package / Case: 0505 (1412 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±150ppm/°C (exact match required)
• Operating Temperature Range: -65°C ~ 155°C (exact match required)
• RoHS Status: RoHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The tolerance specification may vary within acceptable substitution parameters. The RCP0505W75R0GEB meets all critical electrical and mechanical requirements while offering improved tolerance performance.

Parameter Comparison

Engineering Selection Recommendations

Both the RCP0505W75R0JEB and RCP0505W75R0GEB are Active product status components manufactured by Vishay Dale within the RCP series. Both parts are RoHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard handling and storage procedures.

The RCP0505W75R0GEB provides tighter tolerance specification (±2% versus ±5%), maintaining all other electrical and mechanical parameters. Selection between these parts depends on application tolerance requirements and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can RCP0505W75R0GEB replace RCP0505W75R0JEB in my circuit?

A: Yes. Both parts share identical resistance value (75 Ohms), power rating (1.4W), package (0505), composition (Thick Film), temperature coefficient (±150ppm/°C), operating temperature range (-65°C ~ 155°C), and compliance certifications (RoHS3, MSL 1). The RCP0505W75R0GEB offers improved tolerance (±2% versus ±5%).

Q: What is the key difference between these two parts?

A: The primary difference is tolerance specification. RCP0505W75R0JEB has ±5% tolerance, while RCP0505W75R0GEB has ±2% tolerance. All other parameters are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 0505 (1412 Metric) package with dimensions of 0.055" L x 0.050" W (1.40mm x 1.27mm) and maximum seated height of 0.025" (0.64mm).

Q: Do both parts meet RoHS requirements?

A: Yes. Both RCP0505W75R0JEB and RCP0505W75R0GEB are RoHS3 compliant.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage and handling.