RCP0505W100RGTP Equivalent & Substitute Parts

Part Overview

The RCP0505W100RGTP is a 100 Ohms ±2% 1.4W chip resistor manufactured by Vishay Dale in the 0505 (1412 Metric) package. This moisture-resistant thick film resistor is designed for surface mount applications requiring stable resistance performance across industrial temperature ranges. The part is currently active in production with 1168 pieces available in stock. Equivalent and substitute parts are identified when electrical specifications, mechanical dimensions, and packaging requirements remain consistent across the product lifecycle or when component sourcing requires alternative part numbers from the same manufacturer.

Substiute Parts

RCP0505W100RGTP

Vishay DaleIn Stock: 1230RCP0505W100RGTP Datasheet

Current PartRFQ

RCP0505W100RGEB

Vishay DaleIn Stock: 1752RCP0505W100RGEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP0505W100RGTP is determined by strict equivalence across the following critical parameters:

• Resistance value: 100 Ohms
• Tolerance: ±2%
• Power rating: 1.4W
• Package designation: 0505 (1412 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Manufacturer: Vishay Dale
• Series: RCP

The RCP0505W100RGEB qualifies as a direct substitute because it maintains identical electrical and mechanical specifications across all parameters listed above. Both parts are manufactured by Vishay Dale within the RCP series and are packaged in Tape & Reel format suitable for automated assembly.

Parameter Comparison

Engineering Selection Recommendations

Both the RCP0505W100RGTP and RCP0505W100RGEB are functionally equivalent for applications requiring 100 Ohms ±2% 1.4W thick film chip resistors in the 0505 package. Both parts are active products from Vishay Dale with identical electrical and mechanical specifications.

The primary distinction between these parts is RoHS compliance status. The RCP0505W100RGEB is ROHS3 compliant, while the RCP0505W100RGTP is RoHS non-compliant. Selection between these parts should be based on regulatory requirements applicable to the end application and target market. Applications subject to RoHS directives should specify the RCP0505W100RGEB. Applications without RoHS requirements may use either part interchangeably from an electrical and mechanical standpoint.

Frequently Asked Questions (FAQ)

Q: Can RCP0505W100RGEB be used as a direct replacement for RCP0505W100RGTP in existing designs?

A: Yes, from an electrical and mechanical perspective. Both parts have identical resistance, tolerance, power rating, temperature coefficient, operating temperature range, and package dimensions. The difference is RoHS compliance status. Verify that your application's regulatory requirements align with the substitute part's compliance certification before implementation.

Q: What determines whether a part qualifies as a substitute for the RCP0505W100RGTP?

A: Substitution eligibility is based on matching all critical parameters: resistance value (100 Ohms), tolerance (±2%), power rating (1.4W), package type (0505 / 1412 Metric), composition (Thick Film), temperature coefficient (±150ppm/°C), operating temperature range (-65°C ~ 155°C), and moisture sensitivity level (1 / Unlimited). All parameters must align exactly.

Q: Are there any packaging differences between RCP0505W100RGTP and RCP0505W100RGEB?

A: No. Both parts are supplied in Tape & Reel (TR) packaging with identical physical dimensions: 0.055" L x 0.050" W (1.40mm x 1.27mm) and maximum seated height of 0.025" (0.64mm). They are compatible with the same automated assembly equipment and handling processes.

Q: Why would I choose one part over the other if they are electrically identical?

A: The primary selection criterion is RoHS compliance. The RCP0505W100RGEB meets ROHS3 compliance requirements, making it suitable for applications and markets with RoHS mandates. The RCP0505W100RGTP is RoHS non-compliant and should be used only in applications where RoHS compliance is not required. Inventory availability may also influence selection between these equivalent parts.

Q: Do both parts have the same temperature performance?

A: Yes. Both parts operate across the identical temperature range of -65°C to 155°C with a temperature coefficient of ±150ppm/°C, ensuring equivalent performance stability across thermal cycling and operational extremes.