RCP0505W100RGS6 Equivalent & Substitute Parts

Part Overview

The RCP0505W100RGS6 is a 100 Ohms ±2% 1.4W chip resistor in 0505 (1412 Metric) package manufactured by Vishay Dale. This moisture-resistant thick film resistor operates across -65°C to 155°C and is classified as Active product status. Substitute parts are identified when electrical specifications, mechanical dimensions, and packaging requirements remain identical across alternative part numbers or manufacturers.

Substiute Parts

RCP0505W100RGS6

Vishay DaleIn Stock: 768RCP0505W100RGS6 Datasheet

Current PartRFQ

RCP0505W100RGEB

Vishay DaleIn Stock: 1752RCP0505W100RGEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP0505W100RGS6 is determined by strict equivalence across the following parameters:

• Resistance value: 100 Ohms
• Tolerance: ±2%
• Power rating: 1.4W
• Package designation: 0505 (1412 Metric)
• Physical dimensions: 0.055" L x 0.050" W (1.40mm x 1.27mm)
• Height - Seated (Max): 0.025" (0.64mm)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance feature
• Number of terminations: 2

The RCP0505W100RGEB qualifies as a direct substitute based on identical electrical and mechanical specifications across all parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

Both RCP0505W100RGS6 and RCP0505W100RGEB are Active status products from Vishay Dale with identical electrical and mechanical specifications. The primary distinction is RoHS compliance status: RCP0505W100RGS6 is RoHS non-compliant, while RCP0505W100RGEB is ROHS3 compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. For applications requiring RoHS3 compliance, RCP0505W100RGEB is the appropriate selection. Both parts are suitable for identical circuit implementations where package constraints and electrical performance are the primary selection criteria.

Frequently Asked Questions (FAQ)

Q: Can RCP0505W100RGEB replace RCP0505W100RGS6 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters including resistance, tolerance, power rating, package dimensions, and operating temperature range. Substitution is valid from a functional standpoint.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance certification. RCP0505W100RGS6 is RoHS non-compliant, while RCP0505W100RGEB is ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical dimensions of 0.055" L x 0.050" W (1.40mm x 1.27mm) with a maximum seated height of 0.025" (0.64mm). Both use the 0505 (1412 Metric) package designation and are compatible with identical PCB layouts.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life without moisture control requirements. Both parts can be stored and handled without special moisture protection measures.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both RCP0505W100RGS6 and RCP0505W100RGEB are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.