RCP0505B75R0JTP Equivalent & Substitute Parts

Part Overview

The RCP0505B75R0JTP is a 75 Ohm ±5% 1.4W chip resistor in 0505 (1412 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component operates across -65°C to 155°C and is classified as Active product status. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained within the allowed parameter tolerances for this resistor category.

Substiute Parts

RCP0505B75R0JTP

Vishay DaleIn Stock: 1027RCP0505B75R0JTP Datasheet

Current PartRFQ

RCP0505W75R0GEB

Vishay DaleIn Stock: 1947RCP0505W75R0GEB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RCP0505B75R0JTP is determined by strict equivalence in the following parameters:

• Resistance value: 75 Ohms (exact match required)
• Power rating: 1.4W (exact match required)
• Package / Case: 0505 (1412 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±150ppm/°C (exact match required)
• Operating Temperature Range: -65°C ~ 155°C (exact match required)
• Features: Moisture Resistant (exact match required)
• Number of Terminations: 2 (exact match required)

Tolerance may vary within the acceptable range for the application. RoHS compliance status and inventory availability do not affect electrical or mechanical substitutability.

Parameter Comparison

Engineering Selection Recommendations

The RCP0505W75R0GEB serves as a direct electrical and mechanical substitute for the RCP0505B75R0JTP. Both components maintain identical resistance value, power rating, package dimensions, and thermal characteristics. The substitute part offers improved tolerance specification (±2% versus ±5%), which provides tighter resistance accuracy without compromising compatibility.

The RCP0505W75R0GEB achieves ROHS3 compliance, whereas the RCP0505B75R0JTP is RoHS non-compliant. Selection between these parts depends on regulatory requirements applicable to the end application. Both parts are Active status products from the same manufacturer series.

Frequently Asked Questions (FAQ)

Q: Can RCP0505W75R0GEB replace RCP0505B75R0JTP in existing designs?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical resistance, power rating, package dimensions, temperature range, and thermal coefficient. The substitute offers tighter tolerance specification.

Q: What is the difference between these two parts?

A: The primary differences are tolerance specification (±2% versus ±5%) and RoHS compliance status (ROHS3 Compliant versus RoHS non-compliant). Electrical performance and mechanical fit are identical.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 0505 (1412 Metric) package with dimensions of 0.055" L x 0.050" W (1.40mm x 1.27mm) and maximum seated height of 0.025" (0.64mm).

Q: Does tolerance difference affect substitutability?

A: No. The RCP0505W75R0GEB tolerance of ±2% is tighter than the RCP0505B75R0JTP tolerance of ±5%, making it suitable for applications requiring the original part's tolerance or better.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -65°C to 155°C with a temperature coefficient of ±150ppm/°C.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both RCP0505B75R0JTP and RCP0505W75R0GEB are supplied in Tape & Reel (TR) packaging.