RCP0505B75R0GS6 Equivalent & Substitute Parts

Part Overview

The RCP0505B75R0GS6 is a 75 Ohm ±2% 1.4W chip resistor in 0505 (1412 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component operates across -65°C to 155°C and is classified as Active product status. Substitute parts are identified when electrical specifications, mechanical dimensions, and packaging remain identical while offering improved availability or compliance status.

Substiute Parts

RCP0505B75R0GS6

Vishay DaleIn Stock: 810RCP0505B75R0GS6 Datasheet

Current PartRFQ

RCP0505W75R0GEB

Vishay DaleIn Stock: 1947RCP0505W75R0GEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP0505B75R0GS6 is determined by strict equivalence across the following parameters:

• Resistance value: 75 Ohms
• Tolerance: ±2%
• Power rating: 1.4W
• Package / Case: 0505 (1412 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±150ppm/°C
• Operating Temperature Range: -65°C ~ 155°C
• Moisture Resistant feature
• Moisture Sensitivity Level: 1 (Unlimited)
• Number of Terminations: 2

The substitute part RCP0505W75R0GEB meets all electrical and mechanical criteria for direct substitution. Differences in RoHS compliance status do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

RCP0505W75R0GEB is a direct functional equivalent to RCP0505B75R0GS6. Both components are Active status products from Vishay Dale's RCP series with identical electrical performance and mechanical specifications.

The primary distinction is RoHS compliance: RCP0505W75R0GEB meets ROHS3 requirements, while RCP0505B75R0GS6 is non-compliant. Selection between these parts depends on regulatory requirements of the end application. For applications requiring RoHS3 compliance, RCP0505W75R0GEB is the appropriate choice. For applications without RoHS mandates, either part provides equivalent performance.

Inventory availability also differs: RCP0505W75R0GEB has 1922 units in stock compared to 748 units for RCP0505B75R0GS6.

Frequently Asked Questions (FAQ)

Q: Can RCP0505W75R0GEB replace RCP0505B75R0GS6 in my circuit?

A: Yes. Both parts are electrically and mechanically identical. They share the same 75 Ohm resistance, ±2% tolerance, 1.4W power rating, 0505 package, and operating temperature range. Direct substitution is valid from a functional standpoint.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. RCP0505W75R0GEB is ROHS3 compliant, while RCP0505B75R0GS6 is not. All other specifications—resistance, tolerance, power, package, temperature range, and moisture resistance—are identical.

Q: Do these parts have the same physical dimensions?

A: Yes. Both components measure 0.055" L x 0.050" W (1.40mm x 1.27mm) with a maximum seated height of 0.025" (0.64mm). They are mechanically interchangeable in PCB layouts.

Q: Which part should I choose for a new design?

A: If your application or customer requires RoHS3 compliance, select RCP0505W75R0GEB. If RoHS compliance is not a requirement, either part is suitable. Consider inventory availability and lead time when making your selection.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both RCP0505B75R0GS6 and RCP0505W75R0GEB are supplied in Tape & Reel (TR) packaging for automated assembly processes.