RCP0505B50R0GS2 Equivalent & Substitute Parts

Part Overview

The RCP0505B50R0GS2 is a 50 Ohm ±2% 1.4W chip resistor in 0505 (1412 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is classified as Active product status. Substitute parts are identified to address inventory availability, compliance requirements, or supply chain continuity needs while maintaining electrical and mechanical compatibility.

Substiute Parts

RCP0505B50R0GS2

Vishay DaleIn Stock: 750RCP0505B50R0GS2 Datasheet

Current PartRFQ

RCP0505W50R0GEB

Vishay DaleIn Stock: 4118RCP0505W50R0GEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCP0505B50R0GS2 is determined by strict equivalence across the following parameters:

• Resistance value: 50 Ohms
• Tolerance: ±2%
• Power rating: 1.4W
• Package type: 0505 (1412 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance feature
• Moisture sensitivity level: 1 (Unlimited)

The substitute part RCP0505W50R0GEB meets all these electrical and mechanical parameters, confirming direct substitutability within the RCP series from Vishay Dale.

Parameter Comparison

Engineering Selection Recommendations

Both RCP0505B50R0GS2 and RCP0505W50R0GEB are electrically and mechanically equivalent. The primary distinction is RoHS compliance status: RCP0505B50R0GS2 is RoHS non-compliant, while RCP0505W50R0GEB is ROHS3 compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. For applications requiring RoHS3 compliance, RCP0505W50R0GEB is the appropriate choice. Both parts are Active status products from Vishay Dale's RCP series with identical electrical performance and physical dimensions.

Frequently Asked Questions (FAQ)

Q: Can RCP0505W50R0GEB replace RCP0505B50R0GS2 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters including resistance, tolerance, power rating, package dimensions, and operating temperature range. The primary difference is RoHS compliance status.

Q: What is the key difference between these two part numbers?

A: RCP0505B50R0GS2 is RoHS non-compliant, while RCP0505W50R0GEB is ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 0505 (1412 Metric) package with identical dimensions of 0.055" L x 0.050" W (1.40mm x 1.27mm) and maximum seated height of 0.025" (0.64mm).

Q: Do these parts have the same temperature performance?

A: Yes. Both parts operate across -65°C ~ 155°C with identical temperature coefficient of ±150ppm/°C.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both RCP0505B50R0GS2 and RCP0505W50R0GEB are supplied in Tape & Reel (TR) packaging.