RCP0505B100RGTP Equivalent & Substitute Parts

Part Overview

The RCP0505B100RGTP is a 100 Ohms ±2% 1.4W chip resistor in 0505 (1412 Metric) package manufactured by Vishay Dale. This thick film, moisture-resistant component is classified as Active product status and is designed for applications requiring precision resistive elements in compact form factors. Equivalent and substitute parts are identified when electrical specifications, mechanical dimensions, and packaging parameters align with the original component requirements.

Substiute Parts

RCP0505B100RGTP

Vishay DaleIn Stock: 789RCP0505B100RGTP Datasheet

Current PartRFQ

RCP0505W100RGEB

Vishay DaleIn Stock: 1752RCP0505W100RGEB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RCP0505B100RGTP is determined by strict equivalence across the following parameters:

• Resistance value: 100 Ohms
• Tolerance: ±2%
• Power rating: 1.4W
• Package type: 0505 (1412 Metric)
• Composition: Thick Film
• Temperature coefficient: ±150ppm/°C
• Operating temperature range: -65°C ~ 155°C
• Moisture resistance feature
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

The substitute part RCP0505W100RGEB meets all these electrical and mechanical parameters and is manufactured by the same supplier (Vishay Dale) within the same RCP series.

Parameter Comparison

Engineering Selection Recommendations

Both RCP0505B100RGTP and RCP0505W100RGEB are Active status components with identical electrical and mechanical specifications. The primary distinction is RoHS compliance status: RCP0505B100RGTP is RoHS non-compliant, while RCP0505W100RGEB is ROHS3 compliant. Selection between these parts should be based on regulatory and environmental requirements applicable to the end application. For applications requiring RoHS3 compliance, RCP0505W100RGEB is the appropriate selection. For applications without RoHS compliance mandates, either part is functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Can RCP0505W100RGEB replace RCP0505B100RGTP in all applications?

A: Yes, RCP0505W100RGEB is electrically and mechanically equivalent to RCP0505B100RGTP. Both components share identical resistance, tolerance, power rating, package dimensions, and operating parameters. Selection should be based on RoHS compliance requirements.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. RCP0505B100RGTP is RoHS non-compliant, while RCP0505W100RGEB is ROHS3 compliant. All other electrical and mechanical parameters are identical.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 0505 (1412 Metric) package with dimensions of 0.055" L x 0.050" W (1.40mm x 1.27mm) and maximum seated height of 0.025" (0.64mm).

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. Both parts have identical footprints, termination count (2), and mechanical specifications, allowing direct substitution in PCB layouts.

Q: What is the moisture sensitivity level for both parts?

A: Both RCP0505B100RGTP and RCP0505W100RGEB have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.