RC6432J820CS Equivalent & Substitute Parts Reference

Part Overview

The RC6432J820CS is an 82 Ohm ±5% 1W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2512 (6432 Metric) package. This component is classified as Active product status with 844 pieces currently in stock. The part is designed for general-purpose applications requiring moisture-resistant thick film construction with standard tolerance specifications.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when alternative sourcing improves lead times or cost efficiency, or when design requirements permit upgraded specifications such as improved tolerance or automotive-grade certifications.

Key Parameters

Parameter	Value	Substitution Relevance
Resistance Value	82 Ohms	Critical - must match exactly
Tolerance	±5%	Critical - defines circuit accuracy requirements
Power Rating	1W	Critical - minimum thermal capability
Package / Case	2512 (6432 Metric)	Critical - physical and electrical compatibility
Composition	Thick Film	Important - affects frequency response and stability
Temperature Coefficient	±100ppm/°C	Important - defines temperature stability
Operating Temperature Range	-55°C ~ 155°C	Important - defines environmental limits
Moisture Sensitivity Level	MSL 1 (Unlimited)	Important - defines storage and handling requirements
RoHS Status	ROHS3 Compliant	Important - regulatory compliance

Substitute Part Grouping Explanation

Substitute parts are organized into three categories based on electrical and mechanical compatibility with the RC6432J820CS:

Direct Substitutes (Equivalent Specifications) Direct substitutes maintain identical electrical specifications: 82 Ohms resistance, ±5% tolerance, 1W power rating, and 2512 package. These parts are functionally interchangeable with the original part without circuit redesign. Mechanical dimensions may vary within acceptable tolerances for the 2512 package footprint.

Upgrade Substitutes (Enhanced Specifications) Upgrade substitutes improve upon the original specifications while maintaining the same 82 Ohm resistance value, 1W power rating, and 2512 package. These parts feature tighter tolerance (±1% instead of ±5%), which increases circuit accuracy. Upgrade substitutes are backward-compatible and can replace the original part in applications where improved tolerance is beneficial or required.

Similar Substitutes (Alternative Manufacturers) Similar substitutes are offered by different manufacturers with specifications that match or exceed the original part. These include automotive-grade AEC-Q200 certified options and higher power ratings. Similar substitutes maintain the core electrical parameters (82 Ohms, 1W minimum, 2512 package) while offering additional features such as automotive qualification or pulse-withstanding capability.

Key Parameters Determining Substitution:

Resistance value: 82 Ohms (exact match required)
Package: 2512 (6432 Metric) (exact match required)
Power rating: 1W minimum (equal or higher acceptable)
Tolerance: ±5% minimum (equal or tighter acceptable)
Temperature coefficient: ±100ppm/°C (equal or better acceptable)
Operating temperature: -55°C ~ 155°C minimum (equal or wider acceptable)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	Product Status
RC6432J820CS	Samsung Electro-Mechanics	82 Ω	±5%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RC2512JK-0782RL	YAGEO	82 Ω	±5%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
AC2512FK-0782RL	YAGEO	82 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Moisture Resistant	Active
RC2512FK-0782RL	YAGEO	82 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
CRCW251282R0FKEG	Vishay Dale	82 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
ERJ-1TNF82R0U	Panasonic Electronic Components	82 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Not For New Designs
RMCF2512FT82R0	Stackpole Electronics Inc	82 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
RPC2512JT82R0	Stackpole Electronics Inc	82 Ω	±5%	1.5W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Pulse Withstanding	Active

Engineering Selection Recommendations

For Direct Replacement (Equivalent Specifications)

RC2512JK-0782RL (YAGEO) is the primary direct substitute. It maintains identical electrical specifications (82 Ohms ±5%, 1W) and 2512 package with Active product status. This part is suitable for applications where the original Samsung part is unavailable and no specification upgrades are required. Inventory availability is 5200 pieces.

For Upgraded Tolerance Applications

AC2512FK-0782RL (YAGEO) and RC2512FK-0782RL (YAGEO) both provide ±1% tolerance improvement over the original ±5% specification while maintaining 1W power rating and 2512 package. Both parts are Active status. AC2512FK-0782RL includes automotive AEC-Q200 certification. RC2512FK-0782RL offers the highest inventory availability at 11343 pieces. These upgrades are suitable when circuit design permits or requires tighter tolerance specifications.

For Automotive Applications

CRCW251282R0FKEG (Vishay Dale), AC2512FK-0782RL (YAGEO), RMCF2512FT82R0 (Stackpole), and RPC2512JT82R0 (Stackpole) all carry AEC-Q200 automotive qualification. CRCW251282R0FKEG offers the highest inventory (77300 pieces) and ±1% tolerance. RMCF2512FT82R0 maintains ±1% tolerance with Active status. RPC2512JT82R0 provides 1.5W power rating with pulse-withstanding capability and ±5% tolerance, suitable for automotive applications requiring higher power handling.

Parts to Avoid for New Designs

ERJ-1TNF82R0U (Panasonic) carries "Not For New Designs" product status. While electrically compatible with ±1% tolerance and AEC-Q200 certification, this part should not be selected for new circuit designs. It remains available (16514 pieces) only for legacy system support or replacement applications.

Compliance Considerations

All substitute parts listed are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control. All parts maintain MSL 1 (Unlimited) moisture sensitivity level, matching the original part's handling requirements.

Frequently Asked Questions (FAQ)

Q: Can RC2512JK-0782RL (YAGEO) be used as a direct replacement for RC6432J820CS (Samsung)?

A: Yes. RC2512JK-0782RL is a direct substitute with identical electrical specifications (82 Ohms ±5%, 1W) and 2512 package. Both parts are Active status and suitable for immediate substitution without circuit modification.

Q: What is the difference between the direct substitute and upgrade substitutes?

A: The direct substitute (RC2512JK-0782RL) maintains the original ±5% tolerance. Upgrade substitutes (AC2512FK-0782RL, RC2512FK-0782RL, CRCW251282R0FKEG, RMCF2512FT82R0) provide ±1% tolerance, which improves circuit accuracy. All upgrade substitutes are backward-compatible and can replace the original part.

Q: Are all substitute parts available in the same packaging format?

A: No. The original RC6432J820CS uses standard packaging (not specified). Substitute parts are available in Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® formats. Verify packaging compatibility with your assembly process before selection.

Q: Can RPC2512JT82R0 (1.5W) be used instead of the 1W original part?

A: Yes. RPC2512JT82R0 has a higher power rating (1.5W vs 1W), making it suitable for applications requiring equal or greater thermal capability. The higher power rating does not create compatibility issues in circuits designed for 1W components. However, RPC2512JT82R0 maintains ±5% tolerance (matching the original) and includes automotive AEC-Q200 certification.

Q: Why is ERJ-1TNF82R0U marked "Not For New Designs"?

A: ERJ-1TNF82R0U carries "Not For New Designs" status, indicating the manufacturer has discontinued active development for this part. While electrically compatible and currently in stock (16514 pieces), this part should only be used for legacy system maintenance or replacement applications, not for new circuit designs.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive industry qualification standard for passive components. Parts with AEC-Q200 certification (AC2512FK-0782RL, CRCW251282R0FKEG, RMCF2512FT82R0, RPC2512JT82R0) meet automotive reliability and performance requirements. These parts are suitable for automotive applications and general industrial use.

Q: Are there mechanical dimension differences between substitute parts?

A: Yes. While all parts use the 2512 (6432 Metric) package, mechanical dimensions vary slightly. The original RC6432J820CS measures 0.248" L x 0.126" W (6.30mm x 3.20mm). YAGEO substitutes measure 0.250" L x 0.122" W (6.35mm x 3.10mm). Vishay CRCW measures 0.248" L x 0.124" W (6.30mm x 3.15mm). These variations are within standard 2512 package tolerances and do not affect PCB footprint compatibility.

Q: Which substitute offers the best inventory availability?

A: CRCW251282R0FKEG (Vishay Dale) offers the highest inventory at 77300 pieces. This part provides ±1% tolerance, AEC-Q200 certification, and Active product status, making it suitable for both immediate availability and long-term supply security.

Q: Can I mix different substitute parts in the same circuit board assembly?

A: Yes. All substitute parts maintain the same 82 Ohm resistance value, 2512 package, and -55°C ~ 155°C operating temperature range. Mixing parts from different manufacturers is acceptable from an electrical standpoint. However, verify that your assembly process and quality control procedures accommodate multiple part sources.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message