RC6432J131CS Equivalent & Substitute Parts Reference

Part Overview

The RC6432J131CS is a 130 Ohms ±5% 1W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2512 (6432 Metric) package. This component is classified as Active product status and is currently in stock with 1088 pieces available. The part is designed for applications requiring moisture-resistant thick film construction with standard tolerance specifications. Equivalent and substitute parts are identified based on matching electrical characteristics, package dimensions, and thermal operating ranges to ensure functional interchangeability in circuit designs.

Key Parameters

Parameter	Value	Specification Range
Resistance	130 Ohms	Exact match required
Tolerance	±5%	±5% or tighter acceptable
Power Rating	1W	1W or higher acceptable
Package / Case	2512 (6432 Metric)	Exact match required
Composition	Thick Film	Exact match required
Temperature Coefficient	±100ppm/°C	±100ppm/°C or better
Operating Temperature	-55°C ~ 155°C	-55°C ~ 155°C or wider acceptable
Moisture Sensitivity Level	MSL 1 (Unlimited)	MSL 1 required
RoHS Status	ROHS3 Compliant	ROHS3 Compliant required

Substitute Part Grouping Explanation

Substitution logic for the RC6432J131CS is based on the following critical parameters that must match or exceed the original specification:

Mandatory Matching Parameters:

Resistance value: 130 Ohms (exact)
Package type: 2512 (6432 Metric) (exact)
Composition: Thick Film (exact)
Moisture Sensitivity Level: MSL 1 (exact)
RoHS Status: ROHS3 Compliant (exact)

Acceptable Upgrade Parameters:

Tolerance: ±5% original; ±1% tolerance is acceptable as a tighter specification
Power Rating: 1W original; 2W rating is acceptable as a higher capability
Temperature Coefficient: ±100ppm/°C original; ±100ppm/°C or better is acceptable
Operating Temperature Range: -55°C ~ 155°C original; same or wider range is acceptable

Substitute parts are classified into two categories:

Direct Equivalent (Tolerance Match): RC2512JK-07130RL maintains the original ±5% tolerance specification while matching all other parameters.

Similar Substitutes (Enhanced Specifications): CRCW2512130RFKEG, ERJ-1TNF1300U, and RMCF2512FT130R provide tighter ±1% tolerance. CRM2512-FX-1300ELF provides higher 2W power rating with ±1% tolerance. All similar substitutes maintain compatibility with the original circuit requirements while offering improved performance characteristics.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	MSL	RoHS	Product Status
RC6432J131CS	Samsung Electro-Mechanics	130 Ω	±5%	1W	2512	±100ppm/°C	-55°C ~ 155°C	MSL 1	ROHS3	Active
RC2512JK-07130RL	YAGEO	130 Ω	±5%	1W	2512	±100ppm/°C	-55°C ~ 155°C	MSL 1	ROHS3	Active
CRCW2512130RFKEG	Vishay Dale	130 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	MSL 1	ROHS3	Active
CRM2512-FX-1300ELF	Bourns Inc.	130 Ω	±1%	2W	2512	±100ppm/°C	-55°C ~ 155°C	MSL 1	ROHS3	Active
ERJ-1TNF1300U	Panasonic Electronic Components	130 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	MSL 1	ROHS3	Not For New Designs
RMCF2512FT130R	Stackpole Electronics Inc	130 Ω	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	MSL 1	ROHS3	Active

Engineering Selection Recommendations

Primary Recommendation: RC2512JK-07130RL (YAGEO) is the direct equivalent substitute. This part maintains identical electrical specifications (130 Ohms ±5%, 1W) and package configuration (2512) as the original RC6432J131CS. Both parts are Active product status with full availability. Selection of this part requires no circuit re-evaluation and provides direct form-fit-function replacement.

Secondary Recommendations for Enhanced Performance:

CRCW2512130RFKEG (Vishay Dale) and RMCF2512FT130R (Stackpole Electronics Inc) are suitable substitutes when tighter tolerance specifications (±1%) are beneficial to circuit performance. Both maintain 1W power rating and Active product status. These parts are appropriate for designs where improved accuracy is required without increasing thermal dissipation requirements.

CRM2512-FX-1300ELF (Bourns Inc.) is suitable when higher power dissipation capability (2W) is required while maintaining the 130 Ohms resistance value. This part provides margin for thermal stress in high-current applications. Active product status and full compliance certifications apply.

Not Recommended for New Designs: ERJ-1TNF1300U (Panasonic Electronic Components) carries "Not For New Designs" product status. While electrically compatible, this part should not be selected for new circuit development. Existing designs currently using this part may continue operation, but migration to Active-status alternatives is recommended for long-term supply chain stability.

Compliance Verification: All recommended substitutes maintain ROHS3 compliance, MSL 1 moisture sensitivity rating, and identical operating temperature range (-55°C ~ 155°C). All parts are suitable for applications requiring REACH compliance and EAR99 export classification.

Frequently Asked Questions (FAQ)

Q: Can RC2512JK-07130RL replace RC6432J131CS directly without circuit modification?

A: Yes. RC2512JK-07130RL is a direct equivalent with identical resistance (130 Ohms), tolerance (±5%), power rating (1W), package (2512), and operating temperature range (-55°C ~ 155°C). No circuit re-evaluation is required.

Q: What is the difference between the ±5% tolerance original part and the ±1% tolerance substitutes?

A: The original RC6432J131CS specifies ±5% tolerance, meaning the actual resistance value can vary between 123.5 Ohms and 136.5 Ohms. Substitute parts with ±1% tolerance (CRCW2512130RFKEG, ERJ-1TNF1300U, RMCF2512FT130R) guarantee values between 128.7 Ohms and 131.3 Ohms. Tighter tolerance is acceptable as a specification upgrade and does not create incompatibility.

Q: Can CRM2512-FX-1300ELF be used as a substitute if the original circuit design specifies 1W power rating?

A: Yes. CRM2512-FX-1300ELF provides 2W power rating, which exceeds the 1W requirement. Higher power rating capability does not create circuit incompatibility. The part will operate safely in applications designed for 1W dissipation. This substitution is appropriate when component thermal margin is desired.

Q: Are all substitute parts available in the same packaging format?

A: All substitute parts listed are available in Tape & Reel (TR) packaging. The original RC6432J131CS is specified with "-" packaging notation. Tape & Reel format is standard for automated assembly processes and is compatible with standard pick-and-place equipment.

Q: Why is ERJ-1TNF1300U marked "Not For New Designs"?

A: ERJ-1TNF1300U carries "Not For New Designs" product status from Panasonic Electronic Components. This designation indicates the manufacturer is phasing out this part number. While the part remains electrically compatible and currently in stock (3557 pieces), new circuit designs should select from Active-status alternatives such as RMCF2512FT130R or CRCW2512130RFKEG to ensure long-term supply availability.

Q: Do all substitute parts meet the same environmental and compliance standards?

A: Yes. All substitute parts maintain ROHS3 compliance, MSL 1 moisture sensitivity rating, REACH unaffected status, and EAR99 export classification. All parts operate across the identical temperature range (-55°C ~ 155°C) with ±100ppm/°C temperature coefficient. Environmental and regulatory compliance is consistent across all options.

Q: What is the physical size difference between the original part and substitutes?

A: All parts use the 2512 (6432 Metric) package with nominal dimensions of 6.30mm length × 3.20mm width. Minor dimensional variations exist within manufacturing tolerance: length ranges from 6.30mm to 6.40mm, width ranges from 3.10mm to 3.20mm, and height ranges from 0.65mm to 0.80mm. These variations are within standard PCB pad design tolerances and do not affect assembly compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message