RC6432J130CS Equivalent & Substitute Parts Reference

Part Overview

The RC6432J130CS is a 13 Ohms ±5% 1W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2512 (6432 Metric) package. This component is classified as Active product status with moisture resistant properties and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant with MSL 1 (Unlimited) rating, suitable for general industrial and commercial applications requiring standard tolerance resistive elements.

Equivalent and substitute parts are identified based on matching or exceeding the electrical and mechanical specifications of the main part, enabling design flexibility, inventory optimization, and supply chain continuity.

Substiute Parts

RC6432J130CS

Samsung Electro-MechanicsIn Stock: 942RC6432J130CS Datasheet

Current PartRFQ

RC2512JK-0713RL

YAGEOIn Stock: 12722RC2512JK-0713RL Datasheet

DirectRFQ

RC2512FK-0713RL

YAGEOIn Stock: 8576RC2512FK-0713RL Datasheet

UpgradeRFQ

CRCW251213R0FKEG

Vishay DaleIn Stock: 6988CRCW251213R0FKEG Datasheet

SimilarRFQ

CRCW251213R0FKEGHP

Vishay DaleIn Stock: 8907CRCW251213R0FKEGHP Datasheet

SimilarRFQ

ERJ-1TNF13R0U

Panasonic Electronic ComponentsIn Stock: 6212ERJ-1TNF13R0U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC6432J130CS are classified into three categories based on electrical and mechanical compatibility:

Direct Equivalent (Same Tolerance): Parts matching the ±5% tolerance specification with identical 13 Ohms resistance, 1W power rating, and 2512 package dimensions. These parts provide direct functional replacement without design modification.

Upgrade Substitutes (Improved Tolerance): Parts with ±1% tolerance specification, representing improved accuracy over the original ±5% tolerance. These maintain identical 13 Ohms resistance, 1W power rating, and 2512 package compatibility. Upgrade substitutes are electrically and mechanically interchangeable with enhanced precision characteristics.

Enhanced Capability Substitutes (Higher Power Rating): Parts with increased power rating (1.5W) or automotive-grade certifications (AEC-Q200) while maintaining 13 Ohms resistance and 2512 package form factor. These provide additional design margin and specialized application support.

Substitution Criteria:

• Resistance value: 13 Ohms (exact match required)
• Package / Case: 2512 (6432 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Tolerance: ±5% or better (±1% acceptable as upgrade)
• Power Rating: 1W or higher (1.5W acceptable as upgrade)
• RoHS / REACH / MSL: ROHS3 Compliant, REACH Unaffected, MSL 1 (exact match required)

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Active Product Status): RC2512JK-0713RL (YAGEO) is the primary direct equivalent, offering identical electrical specifications (13 Ohms ±5%, 1W) and mechanical compatibility with the RC6432J130CS. Both parts maintain Active product status and ROHS3 compliance. This substitute is suitable for applications where tolerance and power rating specifications are non-critical.

For Improved Accuracy (Active Product Status): RC2512FK-0713RL (YAGEO) and CRCW251213R0FKEG (Vishay Dale) provide ±1% tolerance improvement while maintaining 1W power rating and Active product status. These upgrades are appropriate for circuits requiring tighter resistance tolerances without design modification. Both parts are ROHS3 compliant and maintain the -55°C to 155°C operating range.

For Enhanced Reliability (Active Product Status, Automotive Certification): CRCW251213R0FKEGHP (Vishay Dale) combines ±1% tolerance with 1.5W power rating and AEC-Q200 automotive qualification. This part provides additional design margin and is suitable for automotive or high-reliability applications. Active product status and ROHS3 compliance are maintained.

For Legacy System Support (Not For New Designs): ERJ-1TNF13R0U (Panasonic Electronic Components) carries "Not For New Designs" status and should be used only for maintenance or repair of existing systems. While electrically and mechanically compatible with AEC-Q200 certification, this part is not recommended for new product development.

Frequently Asked Questions (FAQ)

Q: Can RC2512JK-0713RL directly replace RC6432J130CS without circuit modification?

A: Yes. RC2512JK-0713RL is a direct equivalent with matching 13 Ohms ±5% tolerance, 1W power rating, 2512 package, and identical operating temperature range (-55°C to 155°C). Both parts are ROHS3 compliant with MSL 1 rating. No circuit modification is required.

Q: What is the difference between the ±5% and ±1% tolerance substitutes?

A: The main part (RC6432J130CS) specifies ±5% tolerance, meaning the actual resistance value can vary by up to 5% from the nominal 13 Ohms. Upgrade substitutes with ±1% tolerance (RC2512FK-0713RL, CRCW251213R0FKEG, ERJ-1TNF13R0U) provide tighter resistance accuracy, with actual values varying by only 1% from nominal. This improved accuracy is beneficial in precision circuits but is not required for general applications.

Q: Are the physical dimensions of all substitute parts identical?

A: All substitute parts use the 2512 (6432 Metric) package with similar dimensions. Minor variations exist: the main part measures 0.248" L x 0.126" W (6.30mm x 3.20mm), while YAGEO parts measure 0.250" L x 0.122" W (6.35mm x 3.10mm), and Vishay Dale parts measure 0.248" L x 0.124" W (6.30mm x 3.15mm). These variations are within standard PCB footprint tolerances and do not affect mechanical compatibility.

Q: Why is ERJ-1TNF13R0U marked "Not For New Designs"?

A: The ERJ-1TNF13R0U carries "Not For New Designs" status, indicating that Panasonic has discontinued active development and support for this part. While electrically and mechanically compatible, this part should be used only for maintenance or repair of existing systems. For new product development, select from parts with Active product status.

Q: Can CRCW251213R0FKEGHP (1.5W) be used in place of the 1W rated main part?

A: Yes. CRCW251213R0FKEGHP is mechanically and electrically compatible with the RC6432J130CS. The higher 1.5W power rating provides additional thermal margin and is suitable for applications where the original 1W rating is adequate. The increased power rating does not create compatibility issues in circuits designed for 1W resistors.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive industry qualification standard for passive components. Parts carrying this certification (CRCW251213R0FKEG, CRCW251213R0FKEGHP, ERJ-1TNF13R0U) have undergone rigorous testing for automotive applications, including temperature cycling, humidity resistance, and reliability verification. This certification is not required for general industrial applications but is mandatory for automotive designs.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, matching the compliance status of the main part RC6432J130CS. All parts maintain MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture handling requirements during storage or assembly.