RC6432J113CS Equivalent & Substitute Parts Reference

Part Overview

The RC6432J113CS is an 11 kOhms ±5% 1W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2512 (6432 Metric) package. This component is classified as Active product status with moisture-resistant construction suitable for general industrial and commercial applications. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required, or when design upgrades to tighter tolerance specifications are necessary.

Substiute Parts

RC6432J113CS

Samsung Electro-MechanicsIn Stock: 773RC6432J113CS Datasheet

Current PartRFQ

RC2512JK-0711KL

YAGEOIn Stock: 9054RC2512JK-0711KL Datasheet

DirectRFQ

RC2512FK-0711KL

YAGEOIn Stock: 8632RC2512FK-0711KL Datasheet

UpgradeRFQ

CRCW251211K0FKEG

Vishay DaleIn Stock: 4859CRCW251211K0FKEG Datasheet

SimilarRFQ

ERJ-1TNF1102U

Panasonic Electronic ComponentsIn Stock: 4754ERJ-1TNF1102U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC6432J113CS are classified based on strict electrical and mechanical parameter matching:

Direct Equivalent Substitutes maintain identical electrical specifications (11 kOhms ±5% 1W) and mechanical compatibility (2512 package, thick film composition, -55°C ~ 155°C operating range, ±100ppm/°C temperature coefficient). These parts are interchangeable without circuit redesign.

Upgrade Substitutes provide tighter tolerance specifications (±1% instead of ±5%) while maintaining all other electrical and mechanical parameters. These are suitable for applications requiring improved accuracy.

Similar Substitutes meet core electrical requirements (11 kOhms 1W 2512 package) but include additional automotive-grade certifications (AEC-Q200) or represent product lines in non-active status. These require design verification for specific application requirements.

The following parameters determine substitution eligibility:

• Resistance value: 11 kOhms (exact match required)
• Power rating: 1W (exact match required)
• Package: 2512 (6432 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)

Parameter Comparison

Engineering Selection Recommendations

RC2512JK-0711KL (YAGEO) is the direct equivalent substitute. It maintains identical electrical specifications (11 kOhms ±5% 1W) and mechanical compatibility. Both the main part and this substitute are Active status products. Selection is appropriate for direct replacement in existing designs without circuit modification.

RC2512FK-0711KL (YAGEO) is an upgrade substitute with improved tolerance specification (±1% versus ±5%). This part is Active status and suitable for applications requiring tighter resistance accuracy. The upgrade does not compromise any electrical or mechanical parameters.

CRCW251211K0FKEG (Vishay Dale) is a similar substitute with ±1% tolerance and AEC-Q200 automotive-grade certification. This part is Active status and suitable for automotive or high-reliability applications where AEC-Q200 compliance is specified.

ERJ-1TNF1102U (Panasonic Electronic Components) is a similar substitute with ±1% tolerance and AEC-Q200 automotive-grade certification. This part carries Not For New Designs product status, indicating it is in mature or declining production phase. Selection is restricted to legacy design support or replacement applications only.

Frequently Asked Questions (FAQ)

Q: Can RC2512JK-0711KL replace RC6432J113CS directly?

A: Yes. RC2512JK-0711KL is a direct equivalent with identical resistance (11 kOhms), tolerance (±5%), power rating (1W), package (2512), composition (thick film), temperature coefficient (±100ppm/°C), and operating range (-55°C ~ 155°C). No circuit redesign is required.

Q: What is the difference between the main part and RC2512FK-0711KL?

A: The primary difference is tolerance specification. RC2512FK-0711KL provides ±1% tolerance compared to ±5% for the main part. All other electrical and mechanical parameters are identical. The upgrade tolerance is beneficial for precision applications but does not affect physical compatibility or thermal performance.

Q: Are CRCW251211K0FKEG and ERJ-1TNF1102U suitable for new designs?

A: CRCW251211K0FKEG is suitable for new designs as it maintains Active product status. ERJ-1TNF1102U carries Not For New Designs status and should be used only for legacy design support or component replacement in existing products.

Q: Do all substitute parts have the same package dimensions?

A: All substitute parts use the 2512 (6432 Metric) package. Minor dimensional variations exist within manufacturing tolerances. RC6432J113CS and RC2512JK-0711KL have identical length (0.248" / 0.250") and width (0.126" / 0.122"). CRCW251211K0FKEG and ERJ-1TNF1102U have comparable dimensions (0.248" / 0.252" length, 0.124" / 0.126" width). All parts are mechanically compatible with standard 2512 footprints.

Q: What is the significance of AEC-Q200 certification on CRCW251211K0FKEG and ERJ-1TNF1102U?

A: AEC-Q200 is an automotive-grade qualification standard. Parts with this certification meet stringent reliability and performance requirements for automotive applications. Selection of AEC-Q200 parts is required only when automotive-grade specifications are mandated by design requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 Compliant status, matching the main part RC6432J113CS. All parts are also REACH Unaffected and classified under ECCN EAR99.