RC6432F201CS Equivalent & Substitute Parts Reference

Part Overview

The RC6432F201CS is a 200 Ohms ±1% 1W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2512 (6432 Metric) package. This component is classified as Active product status with moisture-resistant construction suitable for general industrial and commercial applications. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental compliance ratings. Alternative components may be required due to inventory availability, supply chain considerations, or application-specific performance requirements such as automotive qualification or enhanced power handling.

Substiute Parts

RC6432F201CS

Samsung Electro-MechanicsIn Stock: 1126RC6432F201CS Datasheet

Current PartRFQ

RC2512FK-07200RL

YAGEOIn Stock: 5017RC2512FK-07200RL Datasheet

DirectRFQ

AC2512FK-07200RL

YAGEOIn Stock: 8830AC2512FK-07200RL Datasheet

UpgradeRFQ

RHC2512FT200R

Stackpole Electronics IncIn Stock: 4933RHC2512FT200R Datasheet

UpgradeRFQ

CRCW2512200RFKEG

Vishay DaleIn Stock: 2040CRCW2512200RFKEG Datasheet

SimilarRFQ

CRCW2512200RFKEGHP

Vishay DaleIn Stock: 1600CRCW2512200RFKEGHP Datasheet

SimilarRFQ

CRCW2512200RFKTG

Vishay DaleIn Stock: 2022CRCW2512200RFKTG Datasheet

SimilarRFQ

ERJ-1TNF2000U

Panasonic Electronic ComponentsIn Stock: 8246ERJ-1TNF2000U Datasheet

SimilarRFQ

RMCF2512FT200R

Stackpole Electronics IncIn Stock: 14704RMCF2512FT200R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC6432F201CS is determined by strict equivalence across the following critical parameters:

Primary Matching Criteria:

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Package: 2512 (6432 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)

Secondary Considerations:

• Power rating (1W minimum required; higher ratings acceptable for direct substitution)
• Physical dimensions (length, width, height within tolerance)
• Compliance certifications (RoHS3, REACH status)
• Product status (Active preferred; Not For New Designs acceptable for existing designs)

Substitute parts are grouped into three categories:

Direct Substitutes: Parts meeting all primary criteria with identical 1W power rating and equivalent physical dimensions.

Upgrade Substitutes: Parts exceeding power rating (1.5W or 2W) or adding automotive AEC-Q200 qualification while maintaining all electrical specifications.

Similar Substitutes: Parts meeting all electrical and thermal specifications with minor dimensional variations or alternative compliance profiles.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Non-Automotive Applications):

RC2512FK-07200RL (YAGEO) is the primary direct substitute. This component maintains identical electrical specifications (200 Ω, ±1%, 1W) and thermal characteristics while offering ROHS3 compliance and Active product status. Physical dimensions are within acceptable tolerance (6.35 x 3.10mm versus 6.30 x 3.20mm). Inventory availability is substantial at 4,976 pieces.

For Automotive or Enhanced Reliability Applications:

AC2512FK-07200RL (YAGEO) or RMCF2512FT200R (Stackpole Electronics Inc) are recommended. Both components provide AEC-Q200 automotive qualification while maintaining the 200 Ω, ±1%, 1W specification. AC2512FK-07200RL offers the highest inventory (8,816 pieces) and is available in Cut Tape & Digi-Reel packaging. RMCF2512FT200R provides the largest inventory pool (14,637 pieces) and is fully ROHS3 compliant.

For Applications Requiring Enhanced Power Handling:

RHC2512FT200R (Stackpole Electronics Inc) provides 2W power rating while maintaining all electrical specifications. This upgrade substitute is suitable where thermal margin or pulse withstanding capability is required. Alternatively, CRCW2512200RFKEGHP (Vishay Dale) offers 1.5W rating with pulse withstanding and AEC-Q200 qualification.

Compliance Considerations:

All recommended substitutes maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating. CRCW2512200RFKTG (Vishay Dale) is RoHS non-compliant and REACH Affected; this part is not recommended for new designs or applications with regulatory compliance requirements.

Product Status Consideration:

ERJ-1TNF2000U (Panasonic Electronic Components) carries "Not For New Designs" status despite meeting all electrical specifications. This component is suitable only for existing design maintenance or legacy system support.

Frequently Asked Questions (FAQ)

Q: Can RC2512FK-07200RL directly replace RC6432F201CS without circuit modification?

A: Yes. RC2512FK-07200RL meets all primary electrical specifications (200 Ω, ±1%, 1W) and thermal characteristics (-55°C ~ 155°C, ±100ppm/°C). Physical dimensions are within acceptable tolerance for 2512 package footprints. No circuit modification is required.

Q: What is the difference between the YAGEO RC2512FK-07200RL and AC2512FK-07200RL?

A: Both are YAGEO 200 Ω, ±1%, 1W, 2512 package resistors. AC2512FK-07200RL includes automotive AEC-Q200 qualification and is designated for automotive applications. RC2512FK-07200RL is the standard industrial grade. Electrical performance is identical; selection depends on application requirements.

Q: Why is RHC2512FT200R listed as an upgrade substitute?

A: RHC2512FT200R provides 2W power rating compared to the 1W specification of RC6432F201CS. This higher power rating allows the component to dissipate greater thermal energy while maintaining identical resistance value and tolerance. It is suitable for applications requiring thermal margin or where pulse withstanding capability is beneficial.

Q: Are all substitute parts ROHS3 compliant?

A: No. CRCW2512200RFKTG (Vishay Dale) is RoHS non-compliant and REACH Affected. All other listed substitutes are ROHS3 compliant. Verify compliance requirements for your application before selection.

Q: What does "Not For New Designs" mean for ERJ-1TNF2000U?

A: This product status indicates the manufacturer is not recommending this component for new circuit designs. ERJ-1TNF2000U is suitable only for maintenance of existing designs or legacy system support. For new designs, select from Active status components such as RC2512FK-07200RL, AC2512FK-07200RL, or RMCF2512FT200R.

Q: Can I use a 2W resistor in place of a 1W resistor?

A: Yes, for direct substitution purposes. A higher power rating (2W) provides additional thermal capacity and is electrically compatible with 1W circuit requirements. The component will operate at lower thermal stress. Verify that physical dimensions remain compatible with PCB layout and thermal management design.

Q: What packaging options are available for substitute parts?

A: Substitute parts are available in Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel packaging formats. RC2512FK-07200RL is supplied in Tape & Reel. AC2512FK-07200RL is available in Cut Tape & Digi-Reel. Verify packaging compatibility with your procurement and assembly processes.

Q: Are dimensional variations between substitute parts significant?

A: Dimensional variations are minor and within 2512 package tolerance. Length ranges from 6.30mm to 6.40mm; width ranges from 3.10mm to 3.20mm; height ranges from 0.65mm to 0.70mm. These variations are acceptable for standard PCB footprints designed for 2512 packages. Verify footprint compatibility for high-density layouts.

Q: Which substitute offers the best inventory availability?

A: RMCF2512FT200R (Stackpole Electronics Inc) offers the highest inventory at 14,637 pieces. AC2512FK-07200RL (YAGEO) provides 8,816 pieces. Both components are Active status with ROHS3 compliance and AEC-Q200 qualification.